2017 NISSAN VERSA SEDAN maintenance

[x] Cancel search: maintenance

Page 152 of 404

NISSAN VERSA SEDAN 2017 2.G Owners Manual Touch-screen maintenance
If you clean the display screen, use a dry, soft
cloth. If additional cleaning is necessary, use a
small amount of neutral detergent with a soft
cloth. Never spray the screen

Page 161 of 404

NISSAN VERSA SEDAN 2017 2.G Owners Manual SYSTEM MAINTENANCE
CAUTION
●Do not use alcohol, benzine or thinner
to clean the camera. This will cause
discoloration.
● Do not damage the camera as the moni-
tor screen may be adversely affected.

Page 256 of 404

NISSAN VERSA SEDAN 2017 2.G Owners Manual ●Keep your engine tuned up. Malfunc-
tions in the ignition, fuel injection, or
electrical systems can cause overrich
fuel flow into the three-way catalyst,
causing it to overheat. Do not keep driv-

Page 313 of 404

NISSAN VERSA SEDAN 2017 2.G Owners Manual ●Properly position the mats in the floor-
well using the floor mat positioning
hook. For additional information, refer
to Floor mat installation in this
section.
● Make sure the floor mat does n

Page 316 of 404

NISSAN VERSA SEDAN 2017 2.G Owners Manual 8 Do-it-yourself
Maintenance precautions...........................8-2
Engine compartment check locations ................8-3
Engine cooling system .............................8-4
Checking engine coo

Page 317 of 404

NISSAN VERSA SEDAN 2017 2.G Owners Manual When performing any inspection or maintenance
work on your vehicle, always take care to prevent
serious accidental injury to yourself or damage to
the vehicle. The following are general precau-
tions

Page 319 of 404

NISSAN VERSA SEDAN 2017 2.G Owners Manual The engine cooling system is filled at the factory
with a pre-diluted mixture of 50% Genuine
NISSAN Long Life Antifreeze/Coolant (blue) and
50% water to provide year-round antifreeze and
coolant prote

Page 321 of 404

NISSAN VERSA SEDAN 2017 2.G Owners Manual CHECKING ENGINE OIL LEVEL
1. Park the vehicle on a level surface and applythe parking brake.
2. Start the engine and let it idle until it reaches operating temperature.
3. Turn off the engine. Wait mo
Page:   < prev 1-8 9-16 17-24 25-32 33-40 41-48 ... 48 next >