2017 NISSAN QUEST engine

[x] Cancel search: engine

Page 475 of 520

NISSAN QUEST 2017 RE52 / 4.G Owners Manual 9-8Maintenance and schedules
EMISSION CONTROL SYSTEM MAINTENANCE
Abbreviations: I = Inspect and correct or replace as necessary, R = Replace
MAINTENANCE OPERATION
Perform at number of miles, kilo-
met

Page 476 of 520

NISSAN QUEST 2017 RE52 / 4.G Owners Manual MAINTENANCE OPERATION
Perform at number of miles,
kilometers or months, whichever
comes first.Miles
61,000
(km 61,000)
Months MAINTENANCE INTERVAL
65
(104) 78 70
(112) 84 75
(120) 90 80
(128) 96 85
(1

Page 484 of 520

NISSAN QUEST 2017 RE52 / 4.G Owners Manual 10 Technical and consumer information
Capacities and recommended fluids/lubricants ............. 10-2Fuel information ................................................................ 10-3
Engine oil a

Page 485 of 520

NISSAN QUEST 2017 RE52 / 4.G Owners Manual 10-2Technical and consumer information
The following are approximate capacities. The actual refill capacities may be a little different. When refilling, follow the procedure
instructed in the “8. Do

Page 487 of 520

NISSAN QUEST 2017 RE52 / 4.G Owners Manual 10-4Technical and consumer information
.E-15 fuel contains more than 10%
oxygenate. E-15 fuel will adversely
affect the emission control devices
and systems of the vehicle and should
not be used. Dama

Page 488 of 520

NISSAN QUEST 2017 RE52 / 4.G Owners Manual damage. If any of the above symptoms are
encountered, have your vehicle checked. It is
recommended you visit a NISSAN dealer for
servicing.
However, now and then you may notice
light spark knock for a

Page 489 of 520

NISSAN QUEST 2017 RE52 / 4.G Owners Manual 10-6Technical and consumer information
Oil viscosity
The engine oil viscosity or thickness changes
with temperature. Because of this, it is important
to select the engine oil viscosity based on the
te

Page 490 of 520

NISSAN QUEST 2017 RE52 / 4.G Owners Manual ENGINE
ModelVQ35DE
Type Gasoline, 4-cycle
Cylinder arrangement 6-cylinder, V-slanted at 608
Bore 6Stroke in (mm) 3.760
63.205 (95.5 681.4)
Displacement cu in (cm
3)213.45 (3,498)
Firing order 1-2-3-4-