2017 NISSAN PATHFINDER light

Black plate (70,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
4-8Setting destination
INFO:
Subcategories may not exist depending on
the category that is selected.
NDE00237. Enter the name of the destination facility and highlight [List], and then push .
The facility list is displayed.
INFO:
.It is not necessary to enter the facility name completely. It is also possible to
display the list screen only by highlighting
[List] without entering the facility name
and pushing .
.The number of narrowed down points are
displayed in the “Matches” column.
.Up to two keywords (part of the facilityname) can be entered by highlighting
[AND Search] and pushing
after entering the first facility name.
NDE0024
INFO:
The facility name can also be entered
directly by highlighting [Choose Name] on
the main category list screen and pushing
.
NDE00258. Highlight the preferred destination from the list, and push .
INFO:
.By highlighting [Sort] and pushing
, options can be sorted from
[By Name] or [By Dist.]. When selecting
[By Dist.], the position of the selected
location is displayed in the preview on
the right side of the screen.
.In some cases, when a facility name has been entered, the number of matching
destinations in the “Matches” column
may be different from the number dis-
played on the list screen. If this occurs,
enter more characters to further reduce
the number of matches.
.The search conditions can be changedby highlighting [Refine].
NDE00269. The entire route is shown on the map. Highlight [Start] after confirming the location
of the displayed destination and push
. The system sets the destination

Black plate (71,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
to the selected location and starts calculat-
ing a route.
INFO:
Even after setting a destination, the location
of the destination can be adjusted, the route
can be stored, etc.
“Procedures after setting destination”
(page 5-2)
Searching for restaurant by ZAGATGUID-5805F8A8-7CDD-4B51-8C4D-79D571DACDE0
NDE00121. Push .
2. Highlight [Places] and push .
NDE00273. Highlight [ZAGAT] and push .
NDE00284.Highlight the preferred state and push
. A list screen is displayed.
NDE0029
5.Highlight the preferred city and push
. A list screen is displayed.
NDE00306.Highlight [RESTAURANT] and push
. A list screen is displayed.
NDE00317. Highlight the preferred category and push
. A list screen is displayed.
Setting destination4-9

Black plate (72,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
4-10Setting destination
NDE00328. Highlight the preferred sorting order andpush . A list screen is displayed.
NDE00339. Highlight the preferred destination facility
from the list, and then push .
INFO:
.By highlighting [Sort] and pushing
, sorting options can be se-
lected to re-sort the list.
.The search conditions can be changed by highlight [Refine].
.By highlighting [Ratings] and pushing, an explanation of the ZAGAT
ratings can be displayed.
NDE003410. The entire route is shown on the map. Highlight [Start] after confirming the location
of the displayed destination and pushing
. The system sets the destination
to the selected location and starts calculat-
ing a route.
INFO:
Even after setting a destination, the location
of the destination can be adjusted, the route
can be stored, etc.
“Procedures after setting destination”
(page 5-2)
*
C2009 Zagat Survey, LLC. Zagat Survey is a
registered trademark of Zagat Survey, LLC
SETTING HOME AS DESTINATIONGUID-F806D824-86A6-4107-911A-3188758F73C8The home location can be set as the destination
to which the system calculates a route. This
function is especially useful when searching for
a route to return to the home location.
NDE00351. Push .
2. Highlight [Home] and push .
NDE00363. The home location is displayed and set as
the destination.

Black plate (73,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
INFO:
If the home location is not stored yet, the
system will automatically display a screen for
storing it.
“Storing location” (page 6-2)
NDE00374. The entire route to home is shown on the map. Highlight [Start] after confirming the
location of the displayed destination, and
push . The system sets the
destination to the selected location and
starts calculating a route.
Voice command
1. Push >located on the steering
wheel switch.
2. After the tone sounds, speak a command.
To set the home location as the destination:
“Navigation” “Destination Home” (Standard
mode) “Destination Home” (Alternate command mode)
SEARCHING FROM ADDRESS BOOKGUID-879543E4-E927-408E-B827-8B554286DD90A location stored in the Address Book can be
set as the destination to which the system
calculates a route. To utilize this function more
effectively, destinations that are often traveled to
should be stored in advance.
NDE00381. Push
.
2. Highlight [Address Book] and push
. A list screen is displayed.
NDE0039
3. Highlight the preferred location from the list
and push .
INFO:
Selecting [Sort] displays a list of various sort
functions. To use the sort functions, stored
locations must be set in advance.
“Storing location” (page 6-2)
NDE0040
INFO:
*1Sort by Number:
The Address Book entries are displayed
in ascending numerical order.
*2Sort by Name:
The Address Book entries are displayed
in alphabetic order.
*3Sort by Icon:
By selecting a particular icon, a list that
contains only the Address Book entries
Setting destination4-11

Black plate (74,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
4-12Setting destination
associated with that icon is displayed.
*4Sort by Group:
By selecting a particular group (family,
friends, leisure, etc.), the selected group
is displayed at the top of the list.
NDE00414. The entire route is shown on the map.Highlight [Start] after confirming the location
of the displayed destination, and push
. The system sets the destination
to the selected location and starts calculat-
ing a route.
INFO:
Even after setting a destination, the location of
the destination can be adjusted, the route can
be stored, etc.
“Procedures after setting destination”
(page 5-2)
Voice command
1. Push >located on the steering
wheel switch.
2. After the tone sounds, speak a command.
To set the destination from the Address Book:
“Navigation” “Address Book” (Standard mode)
“Address book” (Alternate command mode)
SETTING PREVIOUS DESTINATIONGUID-961FF82B-37C8-423A-89D5-7F56A3D728C5A previously set destination can be set again as
the destination to which the system calculates a
route. Up to 300 previous destinations will be
automatically stored.
If the number of previous destinations exceeds
300, the oldest one will be replaced by the new
one.
NDE00421. Push .
2. Highlight [Previous Destinations] and push . A list screen is displayed.
NDE00433. Highlight the preferred destination from thelist and push .
INFO:
By highlighting [By Date], the list can be
sorted in chronological order. By highlight-
ing [By Name], it can be sorted in alphabe-
tical order.
NDE00444. The entire route is shown on the map. Highlight [Start] after confirming the location
of the displayed destination, and push
. The system sets the destination

Black plate (75,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
to the selected location and starts calculat-
ing a route.
INFO:
Even after setting a destination, the location of
the destination can be adjusted, the route can
be stored, etc.
“Procedures after setting destination”
(page 5-2)
Voice command
1. Push >located on the steering
wheel switch.
2. After the tone sounds, speak a command.
To display the Previous Destinations list:
“Navigation” “Previous Destinations” (Standard
mode)
“Previous Destinations” (Alternate command
mode)
SETTING PREVIOUS START POINTGUID-D3EABC23-3672-48AE-8031-57802CDCA4EFThe start point of the previous route guidance
can be set as the destination to which the
system calculates a route.
NDE00451. Push .
2. Highlight [Next Page] and push .
NDE00463. Highlight [Previous Start Point] and push
.
NDE00474. The previous start point is set as a destina-tion, and the entire route is shown on the
map. Highlight [Start] after confirming the
location of the displayed destination, and
push . The system sets the
destination to the selected location and
starts calculating a route.
INFO:
Even after setting a destination, the location of
the destination can be adjusted, the route can
be stored, etc.
“Procedures after setting destination”
(page 5-2)
Voice command
1. Push >located on the steering
wheel switch.
Setting destination4-13

Black plate (76,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
4-14Setting destination
2. After the tone sounds, speak a command.
To set the previous start point as the destination:
“Previous Start Point” (Alternate command
mode)
SETTING FROM STORED ROUTESGUID-69E3A472-F9B2-47DD-9E00-E7811C68452BA preferred route can be selected from the
stored routes.
NDE00451. Push.
2. Highlight [Next Page] and push .
NDE0048
3.Highlight [Stored Routes] and push
. A list screen is displayed.
NDE00494. Highlight the preferred route from the list
and push . The route to the
destination is set.
NDE00505. The entire route is shown on the map. Highlight [Start] after confirming the location
of the displayed destination, and push
. The system sets the destination
to the selected location and starts calculat-
ing a route.
INFO:
. Even after setting a destination, the location
of the destination can be adjusted, the
location can be stored, etc.
“Procedures after setting destination”
(page 5-2)
. The stored route includes only locations
(destination and waypoints) and route cal-
culation conditions, not the route itself.
Therefore, when the destination is set using
a stored route, a different route may be
suggested if the current vehicle location is
different from the one when the route was
stored.
SETTING BY PHONE NUMBERGUID-53B1745A-9772-4C56-B01F-3454785345FFIf the telephone number of the facility is
available, use this to find the facility by entering
the number, and then have the system calculate
a route.
INFO:
. Telephone numbers that were stored for
stored destinations can also be used.
. If the area code of the specified telephone
number does not exist in the map data, the
system will not search for the location.

Black plate (77,1)
[ Edit: 2012/ 4/ 11 Model: 08NJ-N ]
.Only the locations included in the database
in the map data can be searched by the
phone number. Residential phone numbers
cannot be used to search for a location.
NDE00451. Push .
2. Highlight [Next Page] and push .
NDE00513.Highlight [Phone Number] and push
. The telephone number input
screen is displayed.
NDE00804. Enter the telephone number including the
area code.
5. After finishing the entry, highlight [List] and push .
“Number input screen” (page 2-16)
NDE00816. Displays a list screen if there are two or
more search results. Highlight the preferred
destination from the list and push
.
A confirmation screen for the place name
and the location is displayed, and the system
starts calculating.
NDE00827. The entire route is shown on the map.Highlight [Start] after confirming the location
of the displayed destination, and push
. The system sets the destination
to the selected location and starts calculat-
ing a route.
INFO:
Even after setting a destination, the location of
the destination can be adjusted, the route can
be stored, etc.
“Procedures after setting destination”
(page 5-2)
SETTING FREEWAY ENTRANCE/EXITGUID-E4CA34C9-8760-4A9A-9D8A-9FCCEA257ECBThe entrance or exit of a freeway can be set as
the destination to which the system calculates a
route.
Setting destination4-15