2017 NISSAN MAXIMA Owners Manual

Page 113 of 406

NISSAN MAXIMA 2017 A36 / 8.G Owners Manual Compass view
Compass view is displayed when no route is set,
and shows current weather conditions and
speed limit information (if available) .
Far screen view
Far screen view shows destination informa

Page 114 of 406

NISSAN MAXIMA 2017 A36 / 8.G Owners Manual Navigation settings
The navigation related display settings can be
changed.1. Select
usingorand
press the OK button. A menu will display.
2. Using
or, select [Customize
Display] and then select [Navig

Page 115 of 406

NISSAN MAXIMA 2017 A36 / 8.G Owners Manual NAVIGATION SWIPE TO METER
Turn-by-turn route guidance can also be viewed
in the vehicle information display by using Navi-
gation Swipe to Meter. This can be done by
programming a route, touching the

Page 116 of 406

NISSAN MAXIMA 2017 A36 / 8.G Owners Manual The system helps deter vehicle theft but cannot
prevent it, nor can it prevent the theft of interior or
exterior vehicle components in all situations. Al-
ways secure your vehicle even if parking for

Page 117 of 406

NISSAN MAXIMA 2017 A36 / 8.G Owners Manual 2. Place the ignition switch in the OFF orLOCK position and wait approximately
10 seconds.
3. Repeat steps 1 and 2.
4. Restart the engine while holding the device (which may have caused the interferen

Page 118 of 406

NISSAN MAXIMA 2017 A36 / 8.G Owners Manual If the light still remains on and/or the en-
gine will not start, seek service for the
NISSAN Vehicle Immobilizer System as
soon as possible. Please bring all regis-
tered keys that you have. It is re

Page 119 of 406

NISSAN MAXIMA 2017 A36 / 8.G Owners Manual CAUTION
●Do not operate the washer continuously
for more than 30 seconds.
● Do not operate the washer if the
windshield-washer fluid reservoir is
empty.
● Do not fill the windshield-washer fluid

Page 120 of 406

NISSAN MAXIMA 2017 A36 / 8.G Owners Manual – High — High sensitive operation
– Low — Low sensitive operation
To turn the rain-sensing auto wiper system off,
push up the lever to the OFF position, or pull
down the lever to the LO or HI