2017 NISSAN LEAF wheel

[x] Cancel search: wheel

Page 383 of 424

NISSAN LEAF 2017 1.G Owners Manual 1. Remove the rear combination attachment bolt
1.
2. Pull the rear combination assembly evenly toward rear of the vehicle
2. 3. Turn the bulb socket and then remove the
bulb
3. If you have a flat t

Page 387 of 424

NISSAN LEAF 2017 1.G Owners Manual TIRE LABELING
Federal law requires tire manufacturers to
place standardized information on the
sidewall of all tires. This information iden-
tifies and describes the fundamental
characteristics of the

Page 389 of 424

NISSAN LEAF 2017 1.G Owners Manual Other tire-related terminology:
In addition to the many terms that are
defined throughout this section, Intended
Outboard Sidewall is (1) the sidewall that
contains a whitewall, bears white lettering

Page 390 of 424

NISSAN LEAF 2017 1.G Owners Manual TIRE CHAINS
Use of tire chains may be prohibited according to
location. Check the local laws before installing
tire chains. When installing tire chains, make sure
they are the proper size for the tire

Page 391 of 424

NISSAN LEAF 2017 1.G Owners Manual The wheel nuts must be kept tight-
ened to the specification at all times.
It is recommended that wheel nuts
be tightened to the specification at
each tire rotation interval.
WARNING
•
After rotatin

Page 392 of 424

NISSAN LEAF 2017 1.G Owners Manual WARNING
• The use of tires other than those rec- ommended or the mixed use of tires of
different brands, construction (bias,
bias-belted or radial) , or tread patterns
can adversely affect the ride,

Page 393 of 424

NISSAN LEAF 2017 1.G Owners Manual Wheel balance
Unbalanced wheels may affect vehicle handling
and tire life. Even with regular use, wheels can get
out of balance. Therefore, they should be bal-
anced as required.
Wheel balance service

Page 394 of 424

NISSAN LEAF 2017 1.G Owners Manual 9 Technical and consumer information
Recommended fluids/lubricants and capacities.....9-2
Air conditioning system refrigerant and lubricant
recommendations .................... .9-3
Specifications ...