2017 NISSAN ARMADA PLATINUM warning

[x] Cancel search: warning

Page 171 of 2472

NISSAN ARMADA PLATINUM 2017  Owners Manual SIC4368
1. Tachometer*
2. Warning and indicator lights
3. Speedometer*
4. Engine coolant temperature gauge*
5. Voltmeter*
6. Vehicle information display/Odometer/twin tripodometer 7. Engine oil pressu

Page 174 of 2472

NISSAN ARMADA PLATINUM 2017  Owners Manual SIC4374
FUEL GAUGE
The gauge indicates theapproximatefuel level
in the tank.
The gauge may move slightly during braking,
turning, acceleration, or going up or down hills.
The gauge needle returns to 0

Page 180 of 2472

NISSAN ARMADA PLATINUM 2017  Owners Manual recommended you visit a NISSAN
dealer for this service.
. If the 4WD warning light turns on
when driving on dry or hard surfaced
roads:
— in the 4H(I) position, shift the
4WD shift switch to AUTO

Page 182 of 2472

NISSAN ARMADA PLATINUM 2017  Owners Manual and all tires are properly inflated, it
is recommended you consult a
NISSAN dealer.
. Since the spare tire is not equipped
with the TPMS, when a spare tire is
mounted or a wheel is replaced, the
TPMS

Page 183 of 2472

NISSAN ARMADA PLATINUM 2017  Owners Manual If any of the following conditions occur, the air
bag and/or pretensioner systems needs servi-
cing.
.The supplemental air bag warning light
remains on after approximately 7 seconds.
. The supplementa

Page 185 of 2472

NISSAN ARMADA PLATINUM 2017  Owners Manual system malfunction exists.
If this indicator light remains on for 20 seconds
and then blinks for 10 seconds when the engine
is not running, it indicates that the vehicle is not
ready for an emission c

Page 197 of 2472

NISSAN ARMADA PLATINUM 2017  Owners Manual JVS0471X
2. Highlight the “Forward Emergency Braking”key, select ON (enabled) or OFF (disabled)
and push the ENTER button
*B.
When the FEB system is turned off, the FEB
system warning light (orang

Page 198 of 2472

NISSAN ARMADA PLATINUM 2017  Owners Manual such as ice, snow, stickers, for
example. In these cases, the system
may not be able to warn the driver
properly. Be sure that you check,
clean and clear the sensor area
regularly.
. Excessive noise w
Page:   < prev 1-8 9-16 17-24 25-32 33-40 41-48 49-56 ... 264 next >