2017 MITSUBISHI SHOGUN isofix

NOTElDepending on the seating position in the ve-
hicle and the child restraint system that you have, the child restraint can be attached us-
ing one of the following two ways:
• Use the lower anchorage in the rear seat
(3-door models) / second seat (5-door
models) ONLY if the child restraint has ISOFIX mountings (See page 4-34).
• Using the seat belt (See page 4-35).Older children
E00406700147
Children who have outgrown the child re-
straint system should be seated in the rear
seat and wear combination lap shoulder belt.
The lap portion of the belt should be snug and positioned low on the abdomen so that it
is below the top of the hip-bone. Otherwise, the belt could intrude into the child’s abdo-
men during an accident and cause injury.
Child restraint
4-28OVWX17E1Seat and seat belts4

Suitability for various ISOFIX positions
E00411402058Mass groupSize classFixture
Vehicle ISOFIX positionsRear/second OutboardLeft sideRight sideCarrycotFISO/L1XXGISO/L2XX0- Up to 10 kgEISO/R1XX0+- Up to 13 kgEISO/R1XIL*1DISO/R2XXCISO/R3XXI- 9 to 18 kgDISO/R2XXCISO/R3XXBISO/F2IUFIUFB1ISO/F2XIUF, IL* 2IUF, IL*2AISO/F3IUFIUFII- 15 to 25 kg XXIII- 22 to 36 kg XXCAUTIONl
When installing a child restraint system, remove the head restraint from the seat.
l Do not sit in the middle seating position of those seats when installing a child restraint system to the rear outboard (3-door models) or the second outboard
(5-door models).
Child restraint
4-29OVWX17E1Seat and seat belts4

Key of letters to be inserted in the table above:
lIUF- Suitable for ISOFIX forward child restraints systems of universal category approved for use in the mass group.
l IL- Suitable for particular ISOFIX child restraint systems given in the following list (MITSUBISHI MOTORS genuine parts).
l X- ISOFIX position not suitable for ISOFIX child restraint systems in this mass group and/or this size class.IL (Genuine part information) Genuine part No.UN-R44 Approval No.*1MZ314393 (Child restraint system),
MZ314394 (ISOFIX base)E1-04301146*2MZ313045E1-04301133NOTEl
MITSUBISHI MOTORS Europe B.V. reserves the right to changes without any prior announcement.
For detailed information, consult your MITSUBISHI MOTORS Authorized Service Point.

Suitability for various seating positions
E00406802823
3-door models
Mass group
Seating positionFront passengerRear outboard
Rear centre
Activated air-
bagDeactivated
AirBag #1Left sideRight side0- Up to 10 kgXXXXX0+- Up to 13 kgXL*1L*1L*1L*1
Child restraint
4-30OVWX17E1Seat and seat belts4

Installing a child restraint sys-tem to the lower anchorage (ISOFIX child restraint mount-ings) and tether anchorage*
E00408901980
Lower anchorage location
Your vehicle’s rear seat (3-door models)/ second seat (5-door models) is fitted with
lower anchorages for attaching a child re- straint system with ISOFIX mountings.
Tether anchorage locations
There are 2 attachment points on the floor, located behind the rear seat (3-door models)/
second seat (5-door models). These are for securing a child restraint system tether strap to both of the 2 rear (3-door models)/second (5-door models) seating positions in your ve-
hicle.
WARNINGl Child restraint anchorages are designed
to withstand only those loads imposed by
correctly fitted child restraints. Under no circumstances are they to be used for adult seat belts, harnesses, or for attach-
ing other items or equipment to the vehi- cle.Child restraint system with
ISOFIX mountings
The child restraint system is designed only
for seats that incorporate lower anchorages.
Retain the child restraint system using the lower anchorages.
It is not necessary to retain the child restraint
system using the vehicle’s seat belts.
A: Child restraint System connectors
To install
1. Remove any foreign material in or
around the connectors and ensure the ve-
hicle seat belt is in its normal storage po-
sition.
2. Remove the head restraint from the loca-
tion in which you wish to install a child
restraint.
Refer to “Head restraints” on page 4-12.
Child restraint
4-34OVWX17E1Seat and seat belts4