2017 MERCEDES-BENZ SPRINTER language

J
JackJacking points ................................ 263
Preparation .................................... 263
Storage location ............................2 36
Using ............................................. 263
Jump-starting ..................................... 238
K
Key
Position in the ignition lock ............ 117
Key positions ..................................... 117
Kickdown ...........................................1 23
L
Lamps
see Warning and indicator lamps
Lane Keeping Assist
Activating/deactivating ................. 144
Function/notes .............................1 43
Language
Display (vehicles with steering
wheel buttons) ............................... 167
Lashing points and tie downs
Permissible tensile load ................. 281
LATCH-type (ISOFIX) child seat
anchors ................................................ 50
License plate lamp
Replacing bulbs ............................... 91
License plate lamp (Chassis Cab)
Replacing bulbs ............................... 91
Light sensor ......................................... 81
Lighting
see Lights
Lights
Activating/deactivating daytime
running lamps (on-board com-
puter with steering wheel but-
tons) .............................................. 168
Activating/deactivating surround
lighting (vehicles with steering
wheel buttons) ............................... 169
Automatic headlamp mode .............. 81
Bulb failure indicator ........................ 80
Cornering light function ................... 83
Driving abroad ............................... 132 Fog lamps ........................................ 81
Hazard warning lamps ..................... 83
Headlamp range .............................. 82
High beam flasher ............................ 82
High-beam headlamps ..................... 82
Highbeam Assist .............................. 84
Important safety notes .................... 80
Light switch ..................................... 80
Low-beam headlamps ...................... 80
Parking lamps .................................. 80
Rear fog lamp .................................. 81
Setting the exterior lighting
delayed switch-off (vehicles with
steering wheel buttons) ................. 169
Switching the daytime running
lamps on/off (switch) ...................... 80
Turn signals ..................................... 82
see Changing a bulb
see Interior lighting
Limited Warranty ................................ 23
Load distribution ............................... 210
Load securing aids
Carrier systems ............................. 212
Loading gui deli
nes
Important safety notes .................. 208
Loading rails
Installing cargo tie-down rings ....... 212
Maximum tensile strength ............. 282
Loads
Securing ........................................ 210
Transporting .................................. 208
Locator lighting
Setting (vehicles with steering
wheel buttons) ............................... 169
Locking
see Central locking
Locking and unlocking manually ....... 63
Locking centrally
see Central locking
LOW RANGE ....................................... 145
LOW RANGE transmission ratio ....... 145
Low-beam headlamps
Display message ............................ 182
Driving abroad ............................... 132
Replacing bulbs ............................... 88
Switching on/off .............................. 80
Lumbar support ................................... 73
Index13

Menu overview
Diagrams
This is what the displays look like when you scroll through the menus.
Generic terms
The illustration shows the menus on a vehicle
with Audio 15.
On Sound 5/Audio 20, the on-board computer
always shows the AUDIOandTEL (telephone)
menus in English. This is the case even if a dif-
ferent language is selected for the display.
Operation
:Operation menu (Ypage 163)
RStandard display
RCalling up the service due date
(Ypage 222)
RTire pressure monitor (Ypage 249)
RChecking the engine oil level
(Ypage 216)
;Audio menu (Ypage 164)
=Message memory menu (Ypage 173)
?Settings menu (Ypage 165)
ATrip computer menu (Ypage 171)
BTelephone menu (Ypage 172)
iThe generic terms in the tabular overview
should make orientation easier for you. How-
ever, they are not always shown on the dis-
play.
Operation menu
Overview
You can select the following functions in the
Operation menu by pressing the 9or:
button on the steering wheel:
RDisplaying the trip odometer and odometer
(standard display) (Ypage 164)
RDisplaying the coolant temperature
(Ypage 164)
RCalling up the service due date
(Ypage 222)
RTire pressure monitor (Ypage 249)
RChecking the oil level (Ypage 216)
On-board computer (vehicles with steering wheel buttons)163
On-board computer and displays
Z

Operating the CD player
:Current CD (with CD changer)
;Current track
Using the steering wheel buttons
XSwitch on the audio equipment and select the
CD player (see the separate operating instruc-
tions).
XPress the VorU button repeatedly
until the settings for the current CD appear in
the display.
XPress the 9or: button to select a CD
track.
Settings menu
Introduction
In the Settings menu, the following options and
submenus are available:
RResetting all settings
RResetting the functions of a submenu
RInstrument cluster (Ypage 166)
-Units and language settings
-Status bar settings
RTime(Ypage 168)
RLighting (Ypage 168)
-Switching surround lighting on/off
-Switching the daytime running lamps
on/off
-Setting the exterior lighting delayed switch-
off
-Activating/deactivating Highbeam Assist
RVehicle
-Setting the radio station selection
-Setting the windshield wiper sensitivity
RStationary heating or auxiliary heating
(Ypage 107)
RConvenience (Ypage 170)
-Key-dependent settings
iFor safety reasons, it is not possible to reset
all of the functions while the vehicle is in
motion. For example, in the Lighting
sub-
menu, the Daytime runn. lampsfunction
remains unchanged.
Resetting all settings
Settings menu
When the Settingsmessage is displayed, you
can reset all functions of the submenu to the
factory settings.
Using the steering wheel buttons
XPress the VorU button repeatedly
until the Settingsmenu appears in the dis-
play.
XPress and hold the 9reset button for approx-
imately 3 seconds.
You will see a message in the display prompt-
ing you to press the 9reset button again to
confirm.
XPress the 9reset button again.
The functions in all submenus are reset to the
factory settings.
iIf you want to retain the settings, do not
press the 9reset button a second time. The
Settings
menu appears again after approx-
imately 5 seconds.
Resetting the functions of a submenu
You can individually reset the functions of each
submenu to the factory settings.
Using the steering wheel buttons
XPress the VorU button repeatedly
until the Settingsmenu appears in the dis-
play.
XPress the 9button to switch to the sub-
menu selection.
XPress the WorX button to select a
submenu.
On-board computer (vehicles with steering wheel buttons)165
On-board computer and displays
Z

Selecting the unit for distance
Using the steering wheel buttons
XPress theVorU button repeatedly
until the Settingsmenu appears in the dis-
play.
XPress the 9button to switch to the sub-
menu selection.
XPress the WorX button to select the
Inst. clustersubmenu.
XPress the 9button to select the Tripfunction.
The selection marker is on the current setting.
XPress theWorX button to select the
unit for all messages in the display: km(kilo-
meters) or miles.
Selecting the language
The selected range of languages shown is just
an example. The range of languages available is
specific to each country.
Using the steering wheel buttons
XPress theVorU button repeatedly
until the Settingsmenu appears in the dis-
play.
XPress the 9button to switch to the sub-
menu selection.
XPress the WorX button to select the
Inst. clustersubmenu.
XPress the 9button to select the Languagefunction.
The selection marker is on the current setting.
XPress theWorX button to set the lan-
guage for all messages.
Selecting the display for the status bar
Using the steering wheel buttons
XPress the VorU button repeatedly
until the Settingsmenu appears in the dis-
play.
XPress the 9button to switch to the sub-
menu selection.
XPress the WorX button to select the
Inst. clustersubmenu.
XPress the 9button to select the Selectdisp.function.
The selection marker is on the current setting.
XPress the WorX button to select
whether to display the outside temperature or
the speed (digital speedometer).
The selected display is then shown perma-
nently in the lower part of the display.
Selecting the unit for the tire pressure
Using the steering wheel buttons
XPress the VorU button repeatedly
until the Settingsmenu appears in the dis-
play.
XPress the 9button to switch to the sub-
menu selection.
XPress the WorX button to select the
Inst. clustersubmenu.
XPress the 9button to select the Tirepres.function.
The selection marker is on the current setting.
XPress the WorX button to select the
unit for the tire pressure in the display: bar
orpsi.
On-board computer (vehicles with steering wheel buttons)167
On-board computer and displays
Z