2017 MERCEDES-BENZ SLC warning

G WARNING
If engine oil comes into contact with hot com-
ponents in the engine compartment, it may
ignite. There is ar isk of fire and injury.
Make sure that engine oil is not spilled next to
the filler neck. Let the engine cool dow na nd
thoroughly clea nt he engine oil off the com-
ponents before starting the engine.
H Environmental note
When adding oil ,t ake care not to spil la ny. If
oil enters the soil or waterways, it is harmfu lt o
the environment.
! Only use engine oil sa nd oil filters that have
been approved for vehicles with as ervice sys-
tem. You can obtai nal ist of the engine oils
and oil filters tested and approved in accord-
ance with the Mercedes-Benz Specifications
for Service Products at any Mercedes-Benz
Service center.
Damag etot he engine or exhaust system is
caused by the following: R
using engine oil sa nd oil filters that have not
been specifically approved for the service
system R
replacing engine oil and oil filters after the
interval for replacement specified by the
service system has been exceeded R
using engine oil additives.
! Do not add too much oil .Ift he oil leve li s
above the "max" mark on the dipstick, too
much oil has been added. This can lea dt o
damage to the engine or the catalytic con-
verter. Have excess oil siphoned off.
Example :e ngine oil cap X
Turn cap C counter-clockwise and remove it. X
Add engine oil.
If the oil leve lisatorb elow the MIN mark on
the oil dipstick, add 1.1 US qt (1.0 liter) of
engine oil. X
Replace cap C on the filler neck and turn
clockwise.
Ensure that the cap locks into place securely. X
Check the oil leve la gain with the oil dipstick
( Y
pag e2 32).
Further information on engine oil ( Y
pag e2 86).
Checkin ga nd adding other service
products
Checkin gc oo lan tl evel
G WARNING
Certain components in the engine compart-
ment, such as the engine, radiator and parts
of the exhaust system, can become very hot.
Working in the engine compartment poses a
risk of injury.
Where possible ,l et the engine cool dow na nd
touch only the components described in the
following.
G WARNING
The cooling system is pressurized, particularly
when the motor is warm .Ify ou open the cap,
you coul dbes calded if hot coolant sprays out.
There is ar isk of injury.
Let the engine cool dow nb efore you open the
cap. Wea rg love sa nd eye protection. Slowly
open the cap to relieve pressure.
ExampleEngine compartment 233
Maintenance and care Z

obtained at aq ualified specialist workshop, e.g.
an authorized Mercedes-Benz Center.
Driving abroad An extensive Mercedes-Benz Service network is
also available in other countries. You can obtain
further information from any authorized
Mercedes-Benz Center.
Care
Notes on care
H Environmental note
Dispose of empty packaging and cleaning
cloths in an environmentally responsible man-
ner.
! For cleaning your vehicle, do not use any of
the following: R
dry, rough or hard cloths R
abrasive cleaning agents R
solvents R
cleaning agents containing solvents
Do not scrub.
Do not touch the surfaces or protective films
with hard objects, e.g. ar ing or ice scraper.
You could otherwise scratc hord amage the
surfaces and protective film.
! Do not park the vehicle for an extended
period straight after cleaning it, particularly
after having cleaned the wheels with wheel
cleaner. Wheel cleaners could cause
increased corrosion of the brake discs and
brake pads/linings. For this reason, you
should drive for af ew minutes after cleaning.
Brakin gh eats the brake discs and the brake
pads/linings, thus drying them. The vehicle
can then be parked.
Regula rc are of your vehicle is ac ondition for
retaining the quality in the long term.
Use care products and cleaning agents recom-
mended and approved by Mercedes-Benz. Washing the vehicle and cleaning the
paintwork
Automatic car wash
G WARNING
Brakin ge fficienc yisr educed after washing
the vehicle. There is ar isk of an accident.
After the vehicle has been washed, brake
carefully while paying attention to the traffic
conditions until full braking power is restored.
! If DISTRONIC PLUS or the HOLD function is
activated, the vehicle brakes automatically in
certain situations.
To prevent damage to the vehicle, deactivate
DISTRONIC PLUS and the HOLD function in
the following or other similar situations: R
when towing the vehicle R
in the car wash
! It is preferable to use car washes with
adjustable high-pressure pre-cleanin gt hat
corresponds to the specification for the Cab-
riolet program. In car washes that use high
water pressures, there is ar isk that as mall
amount of water may leak into the vehicle.
! Designo retractable hardtop: make sure
that the vehicle is not subsequently treated
with hot wax.
! Lock the car if you wash it in an automatic
car wash. Otherwise, the vehicle might be
damaged.
! Never clean your vehicle in aT ouchless
Automatic Car Wash as these use special
cleaning agents. These cleaning agents can
damage the paintwork or plastic parts.
If you have your vehicle cleaned in ah igh-
pressure automatic car wash, small amounts
of water may enter the vehicle.
! Make sure that the automatic transmission
is in position N when washing your vehicle in
at ow-through car wash. The vehicle could be
damaged if the transmission is in another
position.236
Care
Maintenance and care

! Make sure that: R
the side windows and the roof are com-
pletely closed R
the climate control blower is switched off R
the windshiel dw iper switch is at position 0
The vehicle could otherwise be damaged.
You can wash the vehicle in an automatic car
wash from the very start.
If the vehicle is very dirty, pre-wash it before
cleaning it in an automatic car wash.
After using an automatic car wash, wipe off wax
from the windshiel da nd the wiper blades. This
will prevent smears and reduce wiping noises
caused by residue on the windshield.
Washing by hand In some countries, washing by hand is only
allowed at speciall ye quipped washing bays.
Observe the legal requirements in each country. X
Do not use hot water and do not wash the
vehicle in direct sunlight. X
Use as oft sponge to clean.X
Use am ild cleaning agent, such as ac ar
shampoo approved by Mercedes-Benz. X
Thoroughly hose down the vehicle with ag en-
tle jet of water. X
Do not point the water jet directly towards the
air inlet. X
Use plenty of water and rinse out the sponge
frequently. X
Rinse the vehicle with clean water and dry
thoroughly with ac hamois.X
Do not let the cleaning agent dry on the paint-
work.
Carefully remove all deposits of road salt as
soon as possible when driving in winter.
Powe rw ashers
G WARNING
The water jet from ac ircular jet nozzle (dirt
blasters) can cause invisible exterior damage
to the tires or chassis components. Compo-
nent sd amage dint his way may fail unexpect-
edly .T here is ar isk of an accident.
Do not use power washers with circular jet
nozzles to clean the vehicle. Have damaged tires or chassis component sr eplaced imme-
diately.
! Alway sm aintain ad istance of at least
11.8 in (30 cm) between the vehicle and the
power washer nozzle. Information abou tt he
correct distance is available from the equip-
ment manufacturer.
Move the power washer nozzle around when
cleaning your vehicle.
Do not aim directly at any of the following: R
Tires R
Door gaps, roof gaps, joints, etc. R
Soft top (Designo retractable hardtop) R
Electrical components R
Battery R
Connectors R
Lights R
Seals R
Trim R
Ventilation slots
Damaged seals or electrical component sc an
lead to leaks or failures.
! Do not use high-pressure cleaners if the
tank recess is open while you clean it. This
can cause damage to the seals or other com-
ponents.
Cleaning the paintwork
! Do not affix: R
stickers R
films R
magnetic plates or simila ri tems
to painted surfaces. You could otherwise
damage the paintwork.
Scratches, corrosive deposits, areas affected by
corrosion and damage caused by inadequate
care cannot always be completely repaired. In
such cases, visit aq ualified specialist workshop. X
Remove dirt immediately ,w here possible,
while avoiding rubbing too hard. X
Soak insect remains with insect remover and
rinse off the treated areas afterwards. X
Soak bird droppings with water and rinse off
the treated areas afterwards. X
Remove coolant, brake fluid, tree resin, oils,
fuels and greases by rubbing gently with a Care 237
Maintenance and care Z

cloth soaked in petroleum ethe rorl ig hter
fluid. X
Use tar remover to remove tar stains. X
Use silicone remover to remove wax.
If water no longer forms "beads" on the paint
surface ,u se the paint care products recommen-
ded and approved by Mercedes-Benz. Thi sist he
case approximately every three to five months,
depending on the climate conditions and the
care product used.
If dirt ha sp enetrate dt he paint surface or if the
paint ha sb ecome dull ,t he paint cleane rr ecom-
mended and approved by Mercedes-Benz
shoul dbeu se d.
Do not us et hese care products in the su noro n
the hoo dw hile the hoo dish ot.X
Use as ui tabl et ouch-up stick, e.g. MB Touch-
Up Stick, to repai rs light damag etot he paint-
work quickl ya nd provisionally.
Matte finish care
! Neve rp olish the vehicle or the light alloy
wheels. Polishing causes the finish to shine.
! The following may cause the paint to
become shiny and thus reduce the matte
effect: R
strong rubbing of the paintwork with
unsuitabl em aterialsR
frequent us eofa ut omatic car washesR
washing the vehicle in direct sunlight
! Neve ru se paint cleaner, buffing or polishing
products, or gloss preserver, e.g. wax. These
products are only suitabl ef or high-gloss sur-
faces. Their us eonv ehicle sw it hm atte finish
lead stoc onsiderable surface damag e( shiny,
mottle da reas).
Alway sh av ep ai ntwork repairs carrie do ut at a
qualified specialist workshop.
! Do not us ew as hp rograms with ah ot wax
treatment under any circumstances.
Observe these notes if your vehicle ha sac lear
matte finish. Thi sw il lh el py ou to avoid damage
to the paintwork du etoi ncorrect treatment.
These notes also appl ytol ig ht alloy wheel sw it h
ac lear matte finish.
i The vehicle shoul dp referabl ybew as he db y
hand using as oft sponge, car shampo oa nd
plenty of water. i Use only insect remover and car shampoo
from the rang eofr ecommended and
approved Mercedes-Benz care products.
Cleanin gt he vehicle parts
Cleanin gt he Designo retractable hard-
top
! Whe nc leaning the Designo retractable
hardtop ,u nder no circumstances use: R
Gasoline R
Thinners R
Ta rors tai nr emover R
Other organic solvents
! Remove bird droppings immediately, as
they are corrosiv ea nd can therefore cause
damag etot he Designo retractable hardtop.
Do not clean the vehicle using ap ower
washer. Do not us es harp-edge de quipment
to remove ice and snow. X
Light soiling: yo uc an clean the Designo
retractable hardtop while it is dry or rinse it
with clean water. X
Normal to heav ys oili ng: clean the Designo
retractable hardtop with ab rush and clean
water. Clea ns tains and othe rd ir tw it hab rush
and soft top cleaning agents that have been
recommended and approved by Mercedes-
Benz. Alway sb rush from front to back, fol-
lowing the grain of the fabric.
Frequent cleaning reduce st he Designo retract-
able hardtop's dirt resistance.
To restore these properties ,c lean the Designo
retractable hardtop using roof cleaning agents
that have bee nr ecommended and approved by
Mercedes-Benz.
i If yo up la ntol ea ve the vehicle outsid ef or a
long period of time ,p la ce as ui tabl ec over
over the Designo retractable hardtop.
Cleanin gt he wheels
G WARNING
The water jet from ac ircula rj et nozzle (dirt
blasters) can cause invisible exterior damage
to the tire sorc hassi sc omponents. Compo-
nents damaged in this wa ym ay fai lu nexpect-
edly. There is ar is kofana ccident.238
Care
Maintenanc ea nd care

Do not us ep ower washers with circular jet
nozzles to clean the vehicle. Hav ed amaged
tire sorc hassi sc omponents replaced imme-
diately.
! Do not us ea cidi cw heel cleaning products
to remove brake dust. Thi sc ould damage
whee lb ol ts and brake components.
! Do not park your vehicl ef or al on gp er io do f
time directl ya ft er cleaning, particularly after
cleaning the whee lr im with whee lc leaner.
Whee lc leane rc an lead to the increased cor-
rosio noft he brake discs and pads .T herefore,
drive for af ew minute sa ft er cleaning. By
heating up the brakes ,t he brake discs and
pads dry .T he vehicl ec an the nb ep ar ked for a
long perio doft ime.
Cleanin gt he windows
G WARNING
Yo uc ould become trapped by the windshield
wipers if the ys tart moving whil ec leaning the
windshiel dorw iper blades. There is ar is ko f
injury.
Alway ss wi tch off the windshiel dw iper sa nd
the ignition befor ec leaning the windshiel do r
wipe rb lade s.
! Do not us ed ry cloths, abrasive products,
solvents or cleaning agents containing sol-
vents to clean the insid eoft he windows .D o
not touch the insides of the windows with
hard objects ,e .g .ani ce scrape rorr ing. There
is otherwis ear is kofd amagin gt he windows.
! Clea nt he water drainage channel soft he
windshiel da nd the rea rw in do watr egular
intervals .D eposits such as leaves, petal sa nd
pollen ma yu nder certain circumstances pre-
vent water fro md raining away .T hi sc an lead
to corrosion damage and damage to elec-
troni cc omponents.X
Clea nt he insid ea nd outside of the windows
with ad am pc loth and ac leaning product that
is recommende da nd approved by Mercedes-
Benz. Cleanin gw ip er blades
G WARNING
Yo uc ould become trapped by the windshield
wipers if the ys tart moving whil ec leaning the
windshiel dorw iper blades. There is ar is ko f
injury.
Alway ss wi tch off the windshiel dw iper sa nd
the ignition befor ec leaning the windshiel do r
wipe rb lade s.
! Do not pull the wipe rb lade .O therwise, the
wipe rb lade could be damaged.
! Do not clean wipe rb lade st oo ofte na nd do
not ru bt he mt oo hard. Otherwise, the graph-
ite coating could be damaged. Thi sc ould
cause wipe rn oise.
! Hol dt he wipe ra rm securel yw he nf olding
back. The windshiel dc ould be damage dift he
wipe ra rm smacks against it suddenly. X
Fol dt he windshiel dw iper arms away fro mt he
windshield. X
Carefully clean the wipe rb lade sw it had am p
cloth. X
Fol dt he windshiel dw iper arms back again
befor es wi tching on the ignition.
Cleanin gt he exterior lighting
! Onl yu se cleaning agents or cleaning cloths
which ar es ui tabl ef or plastic light lenses.
Unsuitabl ec leaning agents or cleaning cloths
could scratch or damage the plastic light len-
ses. X
Clea nt he plastic lense soft he exterio rl ig hts
with aw et spong ea nd am il dc leaning agent,
e.g .M er cedes-Benz car shampo oorc leaning
cloths.
Cleanin gt he mirro rt urn signals
! Onl yu se cleaning agents or cleaning cloths
tha ta re suitabl ef or plastic lenses. Unsuitable
cleaning agents or cleaning cloths could
scratch or damage the plastic lense soft he
mirror tur ns ig nals. X
Clea nt he plastic lense soft he mirror tur ns ig -
nal sint he exterio rm irror housing using aw et
spong ea nd mil dc leaning agent, e.g.Care 239
Maintenance and care Z

Mercedes-Ben zc ar shampoo or cleaning
cloths.
Cleanin gt he sensors
! If you clean the sensors with ap ower
washer, make sure that you keep ad istance
of at least 11.8 in (30 cm) between the vehicle
and the power washer nozzle. Information
about the correct distance is available from
the equipment manufacturer.
X
Clean sensors C of the driving systems with
water, car shampoo and as oft cloth.
Cleanin gt he rear view camera
! Do not clean the camera lens and the area
around the rear view camera with ap ower
washer.
X
Open the camera flap. X
Use clean water and as oft cloth to clean
camera lens C . The camera flap closes: R
if the ignition is switched off R
if the camera system is deactivated R
startin gatv ehicle speeds above 6.2 mph
(10 km/h)
Cleanin gt he exhaust pipe
G WARNING
The exhaust tail pipe and tail pipe trim can
become very hot. If you come into contact
with these parts of the vehicle, you could burn
yourself. There is ar isk of injury.
Always be particularly careful around the
exhaust tail pipe and the tail pipe trim. Allow
these components to cool down before touch-
ing them.
! Do not clean the exhaust pipe with acid-
based cleaning agents, such as bathroom
cleaner or wheel cleaner. X
Clean the exhaust pipe with ac hrome care
product tested and approved by Mercedes-
Benz.
Impurities combined with the effect sofr oad grit
and corrosive environmental factors may cause
flash rust to form on the surface. You can
restore the original shine of the exhaust pipe by
cleaning it regularly ,e specially in winter and
after washing.240
Care
Maintenance and care

X
If possible, bring the front wheel si nto the
straight-ahea dp osition.X
Switch off the engine. X
Vehicles without KEYLESS-GO: remove the
SmartKey from the ignition lock. X
Vehicles with KEYLESS-GO: open the driv-
er's door.
The on-board electronics now have status 0 .
This is the same as the SmartKey having been
removed. X
Vehicles with KEYLESS-GO: remove the
Start/Stop button from the ignition lock
( Y
page 115).X
Make sure that the passengers are not endan-
gered as they do so. Make sure that no one is
near the danger area whil eaw heel is being
changed. Anyone who is not directly assisting
in the wheel change should, for example,
stand behind the barrier. X
Get out of the vehicle .P ay attention to traffic
conditions when doing so. X
Clos et he driver's door.
MOExtended tires (tires with run-flat
properties)
General notes With MOExtended tires (tires with run flat char-
acteristics), you can continue to drive you rv ehi-
cle even if there is at otal loss of pressure in one
or more tires. The affected tire must not show
any clearl yv isible damage.
You can recognize MOExtended tires by the
MOExtended marking which appears on the
sidewall of the tire. You wil lf ind this marking
next to the tire size designation, the load-bear-
ing capacity and the speed index ( Y
page 269).
MOExtended tires may only be used in conjunc-
tion with an active tire pressure loss warning
system or with an active tire pressure monitor.
If ap ressure loss warning message appears
in the multifunction display: R
observe the instructions in the display mes-
sages ( Y
page 196).R
check the tire for damage. R
if driving on, observe the following notes.
The driving distance possible in run-flat mode is
approximately 50 miles (80 km) when the vehi-
cle is partially laden and approximately 19 miles
(30 km) when the vehicle is full yl aden. In addition to the vehicle load ,t he driving dis-
tance possible depends upon: R
vehicle speed R
road condition R
outsid et emperature
The driving distance possible in run-flat mode
may be reduced by extreme driving conditions
or maneuvers, or it can be increased through a
moderate style of driving.
The driving distance possible in run-flat mode is
counted from the moment the tire pressure loss
warning appears in the multifunction display.
You must not exceed am aximum speed of
50 mph (80 km/h).
When replacing one or all tires, please observe
the following specifications for you rv ehicle's
tires: R
size R
type and R
the "MOExtended" mark
If at ire has gone flat and cannot be replaced
with aM OExtended tire, as tandard tire may be
used as at emporary measure. Make sure that
you use the proper size and type (summe ro r
winter tire).
Vehicle se quipped with MOExtended tires are
not equipped with aT IREFIT kit at the factory. It
is therefore recommended that you additionally
equi py ou rv ehicle with aT IREFIT kit if y ou mount
tires
that do not feature run-flat properties, e.g.
winter tires. AT IREFIT kit is available, for exam-
ple, from aq ualifie ds pecialist workshop.
Important safety notes
G WARNING
When driving in emergency mode, the driving
characteristics deteriorate, e.g. when corner-
ing, accelerating quickly and when braking.
There is ar isk of an accident.
Do not exceed the stated maximum speed.
Avoid abrupt steering and driving maneuvers,
and driving over obstacle s( curbs, potholes,
off-road). This applies in particular to al aden
vehicle.
Stop driving in emergency mode if: R
you hear banging noises. R
the vehicle starts to shake.242
Flat tire
Breakdow na ssistance

Tire pressure reached
G WARNING
At ire temporaril ys eale dw it ht ire sealant
impairs the drivin gc haracteristics and is not
suitabl ef or highe rs peeds. There is ar is ko f
accident.
Yo us houl dt herefore adap ty ou rd rivin gs tyle
accordingly and drive carefully. Do not exceed
the specifie dm ax imum spee dw it hat ire that
ha sb ee nr epaired using tire sealant.
The maximum spee df or at ire seale dw it ht ire
sealant is 50 mph (80 km/h). The uppe rp ar to f
the TIREFIT sticker must be affixe dtot he instru-
ment cluster in the driver's field of vision.
! Residu ef ro mt he tire sealant ma yc ome out
of the fille rh os ea ft er use. Thi sc ould cause
stains.
Therefore ,p la ce the fille rh os eint he plastic
ba gw hi ch containe dt he TIREFIT kit.
H Environmental note
Hav et he used tire sealant bottle dispose do f
professionally, e.g .ata qualified specialist
workshop.
If tire pressure of 200 kPa (2.0 ba r/ 29 psi )h as
bee na chieved after am aximu mp eriod of ten
minutes: X
Switch off the tire inflation compressor. X
Unscrew the filler hose from the valve of the
faulty tire. X
Stow the tire sealant bottle and the tire infla-
tion compressor. X
Pull away immediately .X
Stop after driving for approximately ten
minutes and check the tire pressure with the
tire inflation compressor.
The tire pressure must now be at least
130 kPa (1.3 bar/19 psi).
G WARNING
If the required tire pressure is not reached
after driving for as hort period, the tire is too
badly damaged. The tire sealant cannot repair
the tire in this instance. Damaged tires and a
tire pressure that is too low can significantly impair the vehicle's braking and driving char-
acteristics. There is ar isk of accident.
Do not continue driving. Contact aq ualified
specialist workshop.
i In cases such as the one mentioned above,
contact an authorized Mercedes-Benz Cen-
ter. Or call 1-800-FOR-MERCede s( in the
USA) or 1-800-387-0100 (i nC an ada).X
Correct the tire pressure if it is stil latl east
130 kPa (1.3 bar/19 psi). See the Tire and
Loading Informatio np la card on the driver's
side B-pillar or the tire pressure table in the
fue lf ille rf la pf or values. X
To increase the tire pressure: switch on the
tire inflation compressor.
X
To reduc et he tire pressure: depress pres-
sure release button C next to pressure
gauge D . X
Whe nt he tire pressure is correct, unscrew the
fille rh os ef rom the valve of the seale dt ire.X
Screw the valve cap onto the tire valve of the
seale dt ire.
X
To remove the tire sealant bottle from the tire
inflation compressor ,p ress together the lock-
ing tab sont he yellow cap.Flat tire 245
Breakdo wn assis tance Z