Snow chains mus tn ot be mounted on emer-
gency spare wheels.
General notes You can as kf or information regarding permitted
emergency spare wheel satana ut horized
Mercedes-Benz Center.
You shoul dr egularl yc heck the pressure of the
emergency spare wheel ,p ar ticularly prior to
long trips, and correct the pressure as neces-
sary ( Y
page 258). The value on the wheel is
valid.
An emergency spare wheel may also be moun-
ted against the direction of rotation. Observe
the time restriction on us easw el last he speed
limitation specified on the emergency spare
wheel.
Replace the tire sa fte rs ix years at the latest,
regardless of wear. Thi sa ls oa pplies to the
emergency spare wheel.
Whe ny ou are driving with the collapsibl es pare
wheel mounted, the tire pressure loss warning
system or the tire pressure monitor canno tf unc-
tion reliably. Only restart the tire pressure loss
warning system or tire pressure monitor when
the defectiv ew he el ha sb ee nr eplaced with a
new wheel.
Vehicles with tire pressure monitor: after
mounting an emergency spare wheel ,t he sys-
tem may stil ld is play the tire pressure of the
removed wheel for af ew minutes. The value dis-
played for the mounted emergency spare wheel
is not the same as the current tire pressure of
the emergency spare wheel.
Removin gt he emergenc ys pare wheel
Collapsibl es pare wheel unde rt he trunk
floor The collapsibl es pare wheel can be found in the
stowag ew el lu nder the trunk floor ( Y
page 218). X
Turn retaining screw D counter-clockwise
and remove it. X
Remove collapsibl es pare wheel C .
Alway so bserve the instructions and safety
notes in the "Mounting aw he el "s ection
( Y
page 275).
Stowin gt he emergenc ys pare wheel
! Only place the collapsibl es pare wheel in the
vehicl ew he nitisd ry .O therwise, moisture
may get into the vehicle.
Take the following step stos tow au se dc ollaps-
ible spare wheel .O therwise, the collapsible
spare wheel will not fit in the trunk in the inten-
ded manner. Mercedes-Benz recommend st hat
yo uh av et his work carrie do ut at aq uali fied
specialist workshop. X
Unscre wt he valve cap from the valve. X
If possible ,u nscrew the valve insert from the
valve and release the air.
Fully deflating the tire sc an take af ew
minutes. X
Screw the valve insert back into the valve. X
Screw the valve cap back on. X
Pull the protectiv es heet provided with the
spare wheel ove rt he collapsibl es pare wheel.X
Stow the collapsibl es pare wheel in the emer-
gency spare wheel well under the trunk. X
Use the retaining scre wtop ie rce the protec-
tive sheet and fasten the collapsibl es pare
wheel in place.
Inflating the collapsibl es pare wheel
! Inflate the collapsibl es pare wheel using the
tire inflation compressor before lowering the280
Emergenc ys pare wheel
Wheels and tires
The antifreeze/corrosion inhibitor concentra-
tion in the engine cooling system should: R
be at least 50%. This will protec tt he engine
cooling system against freezin gd own to
approximately -35 ‡( -37 †).R
not exceed 55% (antifreez ep rotection down
to -49 ‡[ -45 †]). Otherwise, heat will not be
dissipated as effectively.
If the vehicle has lost coolant, add equal
amounts of water and antifreeze/corrosion
inhibitor.
Mercedes-Benz recommends an antifreeze/
corrosion inhibitor concentrate in accordance
with MB Specifications for Servic eP roducts
310.1.
i When the vehicle is first delivered, it is filled
with ac oolant mixture that ensures adequate
antifreeze and anti-corrosion protection.
i The coolant is checked with every mainte-
nanc ei nterval at aq ualified specialist work-
shop.
Fillin gc apacitiesMissing values were not availabl eatt ime of
going to print.
Model Capacity
SLC 300
Approx .8 .5 US qt
(8.0 l)
Mercedes ‑ Benz
SLC 43 AMG
Windshield washer system
Important safety notes
G WARNING
Windshield washer concentrate could ignite if
it comes into contact with hot engine compo-
nent sort he exhaust system. There is ar isk of
fire and injury.
Make sure that no windshield washer con-
centrate is spilled next to the filler neck.
! Only use washer fluid that is suitable for
plastic lamp lenses, e.g. MB SummerFit or MB
WinterFit. Unsuitable washer fluid could dam-
age the plastic lenses of the headlamps. ! Only MB SummerFit and MB WinterFit
washer fluid should be mixed together. The
spray nozzles may otherwise become
blocked.
Do not use distilled or de-ionised water. Other-
wise, the level sensor may give af alse reading.
When handling washer fluid, observe the impor-
tant safety notes on service products
( Y
page 284).
At temperatures above freezing: X
Fill the washer fluid reservoir with am ixture of
water and windshield washer fluid, e.g. MB
SummerFit. X
Add 1p art MB SummerFit to 100 parts water.
At temperatures below freezing: X
Fill the washer fluid reservoir with am ixture of
water and washer fluid, e.g. MB WinterFit.
For the correc tm ixing ratio refer to the infor-
mation on the antifreeze reservoir.
i Add windshield washer fluid, e.g. MB Sum-
merFit or MB WinterFit, to the washer fluid all
year round.
Climate control system refrigerant
Important safety notes The climate control system of your vehicle is fil-
led with refrigerant R ‑ 134a.
The instruction label regarding the refrigerant
type used can be found on the radiator cross
member.
! Only the refrigerant R ‑ 134a and the PAG oil
approved by Mercedes-Benz may be used.
The approved PAG oil may not be mixed with
any other PAG oil that is not approved for
R-134a refrigerant .O therwise, the climate
control system may be damaged.
Servic ew ork, such as refilling with refrigerant or
replacing component parts, may only be carried
out by aq ualified specialist workshop. All appli-
cable regulations, as well as SAE standard J639,
must be adhered to.
Always have work on the climate control system
carried out at aq ualified specialist workshop.288
Service products and filling capacities
Technical data
