The calculated route may include an area to be avoided if:
Ryour destination is located in such an area
Rthere is no alternative route of comparable length available
Highways within blocked areas are always taken into consideration in the route calculation.
iEquipment with a touchpad: alternatively you can carry out this operation using the touchpad
(Ypage 28).
Avoiding a new area
XTo switch to navigation mode: press theßbutton.
XTo show the menu: slide6the controller.
XTo select Options: turn and press the controller.
XSelectRoute Settings.
XSelectAvoid Options.
XSelectAvoid Area.
XSelectAvoid New Area.
A menu appears.
XSelect Using MaporAddress Entry.
If you select Using Map, the map with crosshair appears.
If you select Address Entry
, the address entry menu appears where you can enter the address
(Ypage 72). The map appears with the crosshair after the address is entered.
XTo select an area: when the map with crosshair appears, press the controller.
A red square appears on the map, symbolizing the area to be blocked.
XTo change the size of the area, turn the controller.
The map scale is shown at the bottom of the display. The needle is on the map scale currently
selected.
XWhen the desired size is set, press the controller.
The area is entered into the list.
106Map functions
Navigation
