2017 MERCEDES-BENZ C-Class COUPE rear view mirror

The distance specificationsonly apply to
object sthat are at ground level.
Top view with picturef rom the front cam-
era
:Symbol for the split screen setting with top
view and front camera image
;Yellow guide line at adistance of approx-
imately 13 ft (4.0 m) from the front of the
vehicle
=Yellow guide line for the vehicle width
including the exterior mirrors, for current
steerin gwheel angle (dynamic)
?Yellow lane marking tires at current steering
wheel angle (dynamic)
ARed guide line at adistance of approximately
12 in (0.30 m) from the front of the vehicle
BYellow guide line at adistance of approx-
imately 3ft(1.0 m) from the front of the
vehicle
Top view and enlarged rear view
:Symbol for the split screen setting with top
view and rear view camera image enlarged
;Red guide line at adistance of approximately
12 in (0.30 m)from the rear of the vehicle
This view assists you in estimating the distance
to the vehicl ebehind you.
iThis setting can als obeselected as an
enlarged front view.
Top vieww ithi mage from the side cam-
eras
:Symbo lfor the top view and forward-facing
side camera setting
;Yellow guide line for the vehicl ewidth
including the exterior mirrors (right side of
vehicle)
=Yellow guide line for the vehicl ewidth
including the exterior mirrors (left side of
vehicle)
iYou can als oselect the side camera setting
for the rear-facing view.
180°v iew
:Symbolfor the full screen setting with rear
view camera image
;Own vehicle
=PARKTRONIC warning displays
i180° view can als obeselected as front
view.
Select this view when you are driving out of an
exit and the view of crossing traffic is restricted,
for example.
188Driving systems
Driving and parking

tance Center. The Customer Assistance Center
thenforwards thisi nformation to you.
Yo uc an select the wa yinwhich yo ureceive this
information beforehand .Possibl eoptions
includ etext message ,e-mail or an automated
call.
The data yo ureceive contains the following
information:
Rthe location where the spee dlimit wasexcee-
ded
Rthe tim eatwhich the spee dlimit wase xcee-
ded
Rthe selected spee dlimit which wa sexceeded
Geof encing
Geofencing allows yo utoselect areaswhich the
vehicl eshoul dnot ente rorleave .You will be
informed if the vehicl ecrossest he boundaries
of the selected areas. Yo ucan select the wa yin
which yo ureceive thisi nformation beforehand.
Possibl eoptions includ etext message ,e-mail or
an automated call.
The area can be determine daseitherac ircle or
ap olygon withamaximum of ten corners. You
can specify up to ten area ssimul taneously .Dif-
ferent setting sarepossibl efor each area.
These setting scan be calle dupunder "Owners
Online "athttp://www.mbusa.com.
Alternatively ,you can trigge ranMBInfo calland
inform the custome rservice representative that
yo uw ishtoa ctivate ge ofencing.
Currently inactiv eareas can be activated by text
message.
Triggerin gthe vehicle alarm
With thisf unction, yo ucan trigge rthe vehicle's
panic alar mvia text message .Analarmsounds
and the exterio rlighting flashes. Depending on
the setting ,the panic alar mlasts fiv eort en sec-
onds. Afterwards ,the alar mswitches off.
Garaged ooro pener
General notes
The HomeLink®garage door opene rintegrated
in the rear-view mirrora llowsyou to operate up
to thre edifferent door and gate systems. Use the integrated garage door opene
ronlyo n
garage doors that:
Rhave safety stop and revers efeatures and
Rmee tcurrent U.S. federa lsafety standards
Once programed ,the integrated garage door
opene rinthe rear-view mirrorw illa ssum ethe
functio nofthe garage door system's remote
control. Please also rea dthe operating instruc-
tions for the garage door system.
When programming agarag edooro pener, park
the vehicl eoutside the garage .Donot runt he
engine whil eprogramming.
Certain garage door drives ar eincompatible
with the integrated garage door opener. If you
have difficulty programing the integrated garage
door opener, contact an authorize dMercedes-
Benz Center.
Alternatively ,you can cal lthe following tele-
phone assistance services:
RUSA: Mercedes-Benz Customer Assistance
Center at 1-800-FOR-MERCedes
RCanada: Customer Service at
1-800-387-0100
RHomeLink®hotline 1-800-355-3515 (free of
charge)
Mor einformation on HomeLink
®and/or com-
patible products is also availabl eonline at
http://www.homelink.com .
No

te sont he declaratio nofconformity
(
Ypage 28).
USA: FCC ID: CB2HMIHL4
Canada: IC:2 79B-HMIHL4
Important safety notes
GWARNING
When yo uoperate or progra mthe garage door
with the integrated garage door opener, per-
son sint he range of movement of the garage
door can become trapped or struck by the
garage door. There is ariskofi njury.
When using the integrated garage door
opener, always make sure thatn obodyis
withint he range of movement of the garage
door.
GWARNING
Combustion engine semitp oiso nous exhaust
gasess uchasc arbonmonoxide. Inhaling
Features283
Stowag eand featur es
Z

these exhaust gasesleadsto poisoning. There
is ar iskoff atal injury.T herefore neve rleave
the engine running in enclose dspacesw ith-
ou tsufficient ventilation.
Programming
Programming buttons
Pa ya ttentio ntothe "Important safety notes"
(Ypage 283).
Garage door remote control Ais not included
with the integrated garage door opener.
XTurn the SmartKeytop osition2in the ignition
lock (Ypage 131).
XSelect one of buttons ;to? to us etoc on-
trol the garage door drive.
XTo start programmin gmode: press and
hol done of buttons ;to? on the integrated
garage door opener.
The garage door opene risnow in program-
ming mode. After ashort time, indicator
lamp :lights up yellow.
Indicato rlam p: lights up yellow as soo nas
button ;,=or? is stored for the first time.
If the selected button hasa lready been pro-
grammed, indicator lamp :will onl ylight up
yellow after ten second shavee lapsed .
XReleas ebutton ;, =or?.I ndicator
lamp :flashe syellow.
XTo program the remote control: point
garage door remote control Atowards but-
tons ;to? on the rear-view mirrorata dis-
tance of 2to8in(5t o20cm).
XPress and hol dbutton Bon remote control
A unti lindicator lamp :lights up green.
When indicator lamp :lights up green: pro-
gramming is finished. When indicator lamp
:flashe sgreen: pro-
gramming wa ssuccessful. Th enext stepist o
synchronize the rolling cod e(
Ypage 284).
XReleasebutton Bon remote control Afor
the garage door drive system.
If indicator lamp :lights up red :repea tthe
programing procedur efor the corresponding
button on the rear-view mirror. When doing
so, vary the distance between remote control
A and the rear-view mirror.
Th er equired distance between remote con-
trol Aand the integrated garage door opener
depends on the garage door drive system.
Severala ttempts might be necessary.Y ou
shoul dteste very positio nfor at least
25 second sbefor et rying anotherp osition.
Synchronizing the rolling code
Paya ttentio ntothe "Important safety notes"
(Ypage 283).
If the garage door systemu sesar olling code,
yo uw illa lsoh avetos ynchronize the garage
door systemw itht he integrated garage door
opene rinthe rear-view mirror. To do thisy ouwill
nee dtou sethe programming button on the door
drive contro lpan el.T he programming butto n
may be located in differen tplace sd epen ding on
the manufacturer .Itisusually locatedonthe
door drive uni tonthe garage ceiling.
Familiariz eyoursel fwitht he garage door drive
operating instructions, e.g .under "Program-
ming additional remo
te controls",b
efor ec arry-
ing ou tthe following steps.
Your vehicl emustbew ithinr each of the garage
door or gate opene rdrive. Make sure thatn ei-
thery ourv ehicl enor any persons/objects are
present withint he sweepofthe door or gate.
XTurn the SmartKeytop osition2in the ignition
lock (Ypage 131).
XGe toutof the vehicle.
XPress the programming button on the door
drive unit.
Usually ,you now have 30 second stoinitiate
the next step.
XGe tinto the vehicle.
XPress previously programmedb utton ;, =
or ? on the integrated garage door opener
repeatedly and in quick succession unti lthe
door closes.
Th er olling cod esynchronizatio nist henc om-
plete.
284Features
Stowag eand featur es

Notesonp rogrammin gthe remote con-
trol
Canadia nradio frequency laws require a"break"
(o ri nterruption) of the transmission signals
after broadcasting for afew seconds. Therefore,
these signals mayn ot last long enoughfor the
integrated garage door opener. Th esigna lisn ot
recognize dduringp rogramming. Comparable
with Canadia nlaw ,som eU .S. garage door open-
ers also featur ea"break".
Procee dasfollows:
Rif youliveinC anada
Rif yo uhaved ifficultie sprogramming the
garage door opene r(regardles sofwhere you
live) when using the programming steps
XPress and hol done of buttons ;to? on the
integrated garage door opener.
After ashort time, indicator lamp :lights up
yellow.
XReleas ethe button.
Indicato rlam p: flashe syellow.
XPress button Bof garage door remote con-
trol Afor two seconds, thenr elease it for two
seconds.
XPress button Bagai nfor two seconds.
XRepeat thiss equence on button Bof remote
control Aunti lindicator lamp :lights up
green.
When indicator lamp :lights up green: pro-
gramming is finished.
When indicator lamp :flashe sgreen: pro-
gramming wa ssuccessful. Th enext stepi
sto
s

ynchronize the rolling code.
XReleas ebutton Bof remote control Aof the
garage door drive.
If indicator lamp :lights up red :repea tthe
programming proces sfor the corresponding
button on the rear-view mirror. When doing
so, vary the distance between remote control
A and the rear-view mirror.
Th er equired distance between remote con-
trol Aand the integrated garage door opener
depends on the garage door drive system.
Severala ttempts might be necessary.Y ou
shoul dteste very positio nfor at least
25 second sbefor etrying another position.
Problems whe nprogramming
If you are experiencing problems programing
the integrated garage door opener on the rear-
view mirror, take note of the following instruc-
tions:
RCheck the transmitter frequency use dby
garage door drive remote control Aand
whethe ritissupported. The transmitter fre-
quency can usuall ybefound on the back of
the garage door drive remote control.
The integrated garage door opener is com-
patible with devices that have units which
operate in the frequency range of 280 to
433 MHz.
RReplace the batteries in garage door remote
control A.This increases the likelihoo dthat
garage door remote control Awilltransmit a
strong and precis esigna ltot he integrated
garage door opener.
RWhen programming, hold remote control A
at varying distances and angle sfrom the but-
ton which you are programming. Try various
angle satad istance between 2and 12 inches
(5to 30 cm) or at the same angle but at varying
distances.
RIf another remote control is available for the
same garage door drive ,repeatt he same pro-
gramming steps with this remote control.
Before performing these steps, make sure
that new batteries have been installed in
garage door drive remote control A.
RNote that some remote controls only transmit
foralimited amount of time (the indicator
lam pont he remote control goes out). Press
button Bon remote control Aagain before
transmission ends.
RAlign the antenna cabl eofthe garage door
opener unit. This can improve signa lrecep-
tion/transmission.
Opening/closingt he garage door
After it has been programmed, the integrated
garage door opener performs the function of the
garage door system remote control. Please also
read the operating instructions for the garage
door system.
XTurn the SmartKey to position 2in the ignition
lock (Ypag e131).
XPress button ;,=or? which you have
programmed to operate the garage door.
Garage door syste mwithafixed code: indi-
cator lamp :lights up green.
Features285
Stowage and features
Z

Garage door system witharolling code: indi-
cator lamp :flashes green.
The transmitte rwill transmit asignal as long
as th ebutton is pressed. The transmission is
halted after amaximum of te nseconds and
indicator lamp :lightsupy ellow.
XPress button ;,=or? again if necessary.
Clearing th ememory
Makes ure that you clear th ememory of the
integrate dgarag edoor opener before sellingt he
vehicle.
XTurn th eSma rtKey to position 2in th eignition
lock(Ypage 131).
XPress and hold buttons ;and ?.
The indicator lamp initially lightsupy ellow
and then green.
XRelease buttons ;and ?.
The memory of th eintegrate dgarag edoor
opener in th erear-view mirror is cleared.
Floormats
GWARNING
Object sinthedriver'sf ootwell can restrict the
pedal travel or obstruc tadepressedp edal.
The operatin gand road safety of th evehicle is
jeopardized. Thereisar isk of an accident.
Makes ure that all object sinthevehicle are
stowed correctly, and that they canno tenter
th ed river'sf ootwell. Install th efloormats
securely and as specified in order to ensure
sufficient clearance for th epedals.Don otuse
loosef loormats and do no tplace floormats on
to pofo neanother.
XSlid ethe relevan tseat back.
XTo install: place thefloormat in th efootwell.
XPress studs :onto retainers ;.
XTo remove:pull thefloormat off retainers ;.
XRemovethefloormat.
286Features
Stowage and features

Cleaning themirror turn signals
!Only use cleanin gagents or cleanin gcloths
that are suitable for plastic lenses.U nsuitable
cleanin gagents or cleanin gcloth scould
scratch or damag ethe plastic lenses of the
mirror tur nsignals.
XClean th eplastic lenses of th emirror tur nsig-
nals in th eexteri or mirror housing usingaw et
sponge and mild cleanin gagent, e.g.
Mercedes-Ben zcar shampoo or cleaning
cloths.
Cleaning th esensors
!If you clean th esensorsw ithapower
washer, mak esure that you keep adistance
of at least 11.8 in (30 cm)between the vehicl e
and th epower washer nozzle. Information
about th ecorrec tdistanc eisavailabl efrom
th ee quipment manufacturer.
XClean sensors :of th edriving systems with
water, car shampoo and asoftc loth.
Cleaning th erearv iew camera and 360°
camera
!Do no tclean th ecamera lensa nd thearea
aroun dthe rear view camera or 360°camera
with ahigh-pressurew aterjet.
XMakes ure that th evehicle is stationar yand
that th eSmartKey is in position 2in th eigni-
tio nlock.
XOpen th ecamera cover for cleanin gvia the
multimedia system (see th eseparate operat-
ing instructions).
XTo clean th ecamera: use clean wate rand a
softc loth to clean camera lens :.
360°camera: if you driveatspeeds above
20 mph (30 km/h) or with th eSma rtKey in posi-
tion 0or 1in th eignition lock, th ecover of the
360° camera closes automatically.
Cleaning th eexhaust pipes
GWARNING
The exhaust tail pipe and tail pipe trim can
become ver yhot.Ify ou com eintoc ontact
with these part softhevehicle ,you coul dburn
yourself. Thereisar isk of injury.
Always be particularly careful aroun dthe
exhaust tail pipe and th etail pipe trim. Allow
these component stocooldown before touch-
ing them.
!Do no tclean th eexhaust pipe with acid-
based cleanin gagents ,suchasb athroom
cleaner or wheel cleaner.
!Mercedes-AM Gvehicle swith black exhaust
pipes:t heblack-chrome tailpipe finishers
shouldn otbe polished with achrom epolish.
They will otherwise lose their black sheen. For
optimal care, th efaceplates shouldber ubbed
with alightly oiled cloth after everyc ar wash.
Commercially availabl eengine and car eoils
are suitable for this.
For heavier soiling, you can apply afinep aint-
work polishw itham icrofiber cloth .Remove
th ee xcess polishr esidue after polishing.
296Care
Maintenance and care