2017 MAZDA MX5 MIATA fuse

6 –26 Maintenance and Care
Owner Maintenance
Engine Compartment OverviewW indshield washer fluid reservoir Brake/Clutch fluid reservoir
Engine oil dipstick
Battery Fuse blockCooling system cap
Engine coolant reservoirEngine oil-filler cap
MX-5_8FR4-EA-16J_Edition1.indb 26 2016/08/11 20:29:42

6 –54 Maintenance and Care
Owner Maintenance
FusesYour vehicle's electrical system is
protected by fuses.
If any lights, accessories, or controls do
not work, inspect the appropriate circuit
protector. If a fuse has blown, the inside
element will be melted.
If the same fuse blows again, avoid using
that system and consult an Authorized
Mazda Dealer as soon as possible.
Fuse ReplacementReplacing the fuses on the vehicle's left
side
If the electrical system does not work, first
inspect the fuses on the vehicle's left side.
1. Make sure the ignition is switched off,
and other switches are off.
2. Open the fuse panel cover. 3. Pull the fuse straight out with the
fuse puller provided on the fuse block
located in the engine compartment.
4. Inspect the fuse and replace it if it is
blown.
Normal Blown
5. Insert a new fuse of the same amperage
rating, and make sure it fits tightly. If
it does not fit tightly, have an expert
install it. We recommend an Authorized
Mazda Dealer.
If you have no spare fuses, borrow one
of the same rating from a circuit not
essential to vehicle operation, such as
the AUDIO or OUTLET circuit.
CAUTION Always replace a fuse with a genuine
Mazda fuse or equivalent of the same
rating. Otherwise you may damage
the electric system.
6. Reinstall the cover and make sure that
it is securely installed.
MX-5_8FR4-EA-16J_Edition1.indb 54 2016/08/11 20:29:49

6 –55 Maintenance and Care
Owner MaintenanceReplacing the fuses under the hood
If the headlights or other electrical
components do not work and the fuses
in the cabin are normal, inspect the fuse
block under the hood. If a fuse is blown, it
must be replaced. Follow these steps:
1. Make sure the ignition is switched off,
and other switches are off.
2. Remove the fuse block cover.
NOTE
If the lock is forcefully opened, the fuse
block cover may come in contact with the
frame when it is removed and become
scratched.
When removing the cover, remove it slowly
according to the following procedure.
1. Disengage the rear lock by pressing
down on the front tab with your
fingers.
2. Remove the front tab while slightly
lifting the front of the cover. 3. Remove the cover while lifting it and
sliding it to the rear.
3. If any fuse but the MAIN fuse is
blown, replace it with a new one of the
same amperage rating .
Normal
Blown
WARNING Do not replace the main fuse and
multiplex slow blow fuse by yourself.
Have an Authorized Mazda Dealer
perform the replacement:
Replacing these fuses by yourself is
dangerous because they are high
current fuses. Incorrect replacement
could cause an electrical shock or a
short circuit resulting in a fire.
4. Reinstall the cover and make sure that
it is securely installed.
MX-5_8FR4-EA-16J_Edition1.indb 55 2016/08/11 20:29:49

6 –56 Maintenance and Care
Owner Maintenance Fuse Panel DescriptionFuse block (Engine compartment)
DESCRIPTION FUSE
RATING PROTECTED COMPONENT
1 ENG IG3 5 A —
2 ENG IG2 5 A —
3 HORN2 7.5 A Horn
4 C/U IG1 15 A For protection of various circuits
5 ENG IG1 7.5 A Engine control system
6 — — —
7 INTERIOR 15 A Overhead light
8 ENG B
7.5 A Engine control system
9 AUDIO2 15 A Audio system
10 METER1 10 A Instrument cluster
11 SRS1 7.5 A Air bag
12 — — —
13 RADIO 7.5 A Audio system
14 ENGINE3 20 A Engine control system
15 ENGINE1 10 A Engine control system
16 ENGINE2 15 A Engine control system
17 AUDIO1 25 A Audio system
MX-5_8FR4-EA-16J_Edition1.indb 56 2016/08/11 20:29:50

6 –57 Maintenance and Care
Owner Maintenance
*Some models.DESCRIPTION FUSE
RATING PROTECTED COMPONENT
18 A/C MAG 7.5 A Air conditioner
19 AT PUMP
H/L HI 20 A Transmission control system *
20 AT 15 A Transmission control system *
21 D LOCK 25 A Power door locks
22 H/L RH 20 A Headlight (RH)
23
ENG
B2 7.5 A Engine control system
24 TAIL 20 A Taillights, License plate lights, Parking lights
25 DRL 15 A —
26 ROOM 25 A Overhead light
27 FOG 15 A —
28 H/CLEAN 20 A —
29 STOP 10 A Brake lights
30 HORN 15 A Horn
31 H/L LH 20 A Headlight (LH)
32 ABS/DSC S 30 A ABS, Dynamic stability control system
33 HAZARD 15 A Hazard warning flashers, Turn signal lights
34 FUEL PUMP 15 A Fuel system
35
ENG B3 5 A —
36 WIPER 20 A Windshield wipers
37
CABIN
B 50 A For protection of various circuits
38 — — —
39 — — —
40 ABS/DSC M 50 A ABS, Dynamic stability control system
41 EVVT
A/R PUMP 20 A Engine control system
42 EVPS 30 A Brake control system
43 FAN1 30 A Cooling fan
44 FAN2 40 A —
45 ENG.MAIN 40 A Engine control system
46 EPS 60 A Power steering system
47 DEFOG 30 A Rear window defogger
48 IG2 30 A For protection of various circuits
49 INJECTOR 30 A Engine control system
50 HEATER 40 A Air conditioner
51 — — —
52 — — —
MX-5_8FR4-EA-16J_Edition1.indb 57 2016/08/11 20:29:50

6 –58 Maintenance and Care
Owner Maintenance
*Some models.Fuse block (Left side)
DESCRIPTION FUSE
RATING PROTECTED COMPONENT
1 RHT R 30 A Retractable fastback (RH) *
2 RHT L 30 A Retractable fastback (LH) *
3 — — —
4 — — —
5 F.OUTLET 15 A Accessory sockets
6 — — —
7 AT IND 7.5 A AT shift indicator *
8 MIRROR 7.5 A Power control mirror
9 R_DECK R 30 A Retractable fastback (RH) *
10 R_DECK L 30 A Retractable fastback (LH) *
11 F.WASHER 15 A Windshield washer
12 P.WINDOW 30 A Power windows
13 — — —
14 SRS2/ESCL 15 A —
15 SEAT WARM 20 A Seat warmer *
16 M.DEF 7.5 A Mirror defogger *
MX-5_8FR4-EA-16J_Edition1.indb 58 2016/08/11 20:29:50

9 –8 Specifications
Specifications TiresNOTE
The tires have been optimally matched with the chassis of your vehicle.
When replacing tires, Mazda recommends that you replace tires of the same type originally
fitted to your vehicle. For details, contact an Authorized Mazda Dealer.
Check the tire pressure label for tire size and inflation pressu re.
Refer to Tire Inflation Pressure on page 6-41 .
After adjusting the tire pressure, initialization of the tire pressure monitoring system is
necessary to make the system operate normally.
Refer to Tire Pressure Monitoring System Initialization on page 4-108 .
Standard tire Tire size Inflation pressure
Front Rear
195/50R16 84V 200 kPa (2.0 bar, 29 psi) 200 kPa (2.0 bar, 29 psi)
205/45R17 84W 200 kPa (2.0 bar, 29 psi) 200 kPa (2.0 bar, 29 psi)
Lug nut tightening torque
When installing a tire, tighten the lug nut to the following to rque.
108—147 N·m (12—14 kgf·m, 80—108 ft·lbf)
FusesRefer to Fuses on page 6-54 .
MX-5_8FR4-EA-16J_Edition1.indb 8 2016/08/11 20:30:22

10 –4F Flasher
Hazard warning
............................. 4-57
Headlights
..................................... 4-45
Flat Tire
................................................. 7-3
Mounting the tire
........................... 7-20
Removing a tire
............................. 7-16
Floor Mat
............................................ 3-52
Fluid
Brake/Clutch
................................. 6-31
Washer
........................................... 6-31
Fluids
Classification
................................... 9-4
Foot Brake
........................................... 4-61
Forward Sensing Camera (FSC)
......... 4-95
Fuel
Filler lid and cap ............................ 3-25
Gauge
................................... 4-14, 4-21
Requirements ................................. 3-22
Tank capacity
.................................. 9-5
Fuel Consumption Display
................. 4-70
Fuel Economy Monitor
....................... 4-69
Ending screen display
................... 4-70
Fuel consumption display
............. 4-70
Fuel-Filler Lid
When fuel-filler lid cannot be
opened
........................................... 7-29
Fuses
................................................... 6-54
Panel description
........................... 6-56
Replacement
.................................. 6-54
G Gauges ................................................. 4-11
H Hazard Warning Flasher ...................... 4-57
Hazardous Driving
.............................. 3-52
Head Restraint
....................................... 2-6 Headlights
Coming home light
........................ 4-48
Control ........................................... 4-45
Flashing
......................................... 4-48
High-low beam
.............................. 4-48
Leaving home light
....................... 4-49
Leveling ......................................... 4-49
High Beam Control System (HBC)
.... 4-76
High Beam Control System (HBC)
indicator light (green)
.................... 4-78
Hill Launch Assist (HLA)
................... 4-63
HomeLink Wireless Control System ... 4-57
Hood Release
...................................... 6-24
Horn
.................................................... 4-56
I i-ACTIVSENSE .................................. 4-74
Adaptive Front Lighting System
(AFS)
............................................. 4-75
Blind Spot Monitoring (BSM)
...... 4-85
Camera and sensors
....................... 4-74
Forward Sensing Camera (FSC)
... 4-95
High Beam Control System
(HBC)
............................................ 4-76
Lane Departure Warning System
(LDWS)
......................................... 4-79
Radar sensors (rear) ....................... 4-98
Rear Cross Traffic Alert (RCTA) ... 4-92
If a Warning Light Turns On or
Flashes ................................................. 7-33
Ignition
Switch
.............................................. 4-4
Ignition Not Switched Off (STOP)
Warning Beep
...................................... 7-49
Illuminated Entry System
................. 5-133
Immobilizer System
............................ 3-47
Indicator Lights
................................... 4-28
Low engine coolant temperature
... 4-30
Wrench
.......................................... 4-30
Inside Trunk Release Lever
................ 3-20
Inspecting Brake/Clutch Fluid Level ... 6-31
Inspecting Coolant Level
.................... 6-29 Index
MX-5_8FR4-EA-16J_Edition1.indb 4 2016/08/11 20:30:24