2017 MAZDA MODEL MX-5 RF jump start

7–1*Some models.7–1
7If Trouble Arises
Helpful information on what to do if a problem arises with the vehicle.
Parking in an Emergency ................... 7-2
Parking in an Emergency ............... 7-2
Roadside Emergency Triangle
Retaining Strap
* ............................. 7-2
Flat Tyre ............................................... 7-3
Flat Tyre
* ........................................ 7-3
Tool Storage ................................... 7-5
Emergency Flat Tyre Repair
Kit
* ................................................. 7-7
Changing a Tyre ........................... 7-14
Battery Runs Out .............................. 7-20
Jump-Starting ............................... 7-20
Emergency Starting .......................... 7-23
Starting a Flooded Engine ............ 7-23
Push-Starting ................................ 7-23
Overheating ....................................... 7-24
Overheating .................................. 7-24
When Fuel-Filler Flap Cannot be
Opened ............................................... 7-26
When Fuel-Filler Flap Cannot be
Opened ......................................... 7-26
Emergency Towing ............................ 7-27
Towing Description ...................... 7-27
Towing Hooks .............................. 7-28 Warning/Indicator Lights and Warning
Sounds ................................................ 7-31
If a Warning Light Turns On or
Flashes .......................................... 7-31
Message Indicated in Multi-
information Display
* .................... 7-46
Message Indicated on Display * .... 7-47
Warning Sound is Activated ......... 7-49
When Boot Lid Cannot be
Opened ............................................... 7-55
When Boot Lid Cannot be
Opened ......................................... 7-55
When the Roof Cannot be Closed.... 7-60
When the Roof Cannot be
Closed .......................................... 7-60
/:A(.'',A'FKVKQPKPFD

7–20
If Trouble Arises
Battery Runs Out
J u m p - S t a r t i n g
Jump-starting is dangerous if done incorrectly. So follow the procedure carefully. If you
feel unsure about jump-starting, we strongly recommend that you have a competent service
technician do the work.
WARNING
Follow These Precautions Carefully:
To ensure safe and correct handling of the battery, read the following precautions
carefully before using the battery or inspecting it.
Do not allow the positive ( ) terminal to contact any other metal object that
could cause sparks:
Flames and sparks near open battery cells are dangerous. Hydrogen gas, produced
during normal battery operation, could ignite and cause the battery to explode. An
exploding battery can cause serious burns and injuries. When working near a battery,
do not allow metal tools to contact the positive (
) or negative ( ) terminal of the
battery.
Keep all À ames, including cigarettes, and sparks away from open battery cells:
Flames and sparks near open battery cells are dangerous. Hydrogen gas, produced
during normal battery operation, could ignite and cause the battery to explode. An
exploding battery can cause serious burns and injuries.
Do not jump-start a frozen battery or one with a low À uid level:
Jump-starting a frozen battery or one with a low À uid level is dangerous. It may rupture
or explode, causing serious injury.
Connect the negative lead to a good ground point away from the battery:
Connecting the end of the second jumper lead to the negative (
) terminal of the
discharged battery is dangerous.
A spark could cause the gas around the battery to explode and injure someone.
Route the jumper leads away from parts that will be moving:
Connecting a jumper lead near or to moving parts (cooling fans, belts) is dangerous.
The lead could get caught when the engine starts and cause serious injury.
/:A(.'',A'FKVKQPKPFD

7–21
If Trouble Arises
Battery Runs Out
CAUTION
Use only a 12 V booster system. You can damage a 12 V starter, ignition system, and other
electrical parts beyond repair with a 24 V power supply (two 12 V batteries in series or a
24 V motor generator set).
Jumper leads
Booster batteryDischarged battery
/:A(.'',A'FKVKQPKPFD

7–22
If Trouble Arises
Battery Runs Out
1. Remove the battery cover.
2. Make sure the booster battery is 12
V and that its negative terminal is
grounded.
3. If the booster battery is in another
vehicle, do not allow both vehicles
to touch. Turn off the engine of the
vehicle with the booster battery and
all unnecessary electrical loads in both
vehicles.
4. Connect the jumper leads in the exact
sequence as in the illustration.
 

 
 Connect one end of a lead to the
positive terminal on the discharged
battery (1).
 

 
 Attach the other end to the positive
terminal on the booster battery (2).
 

 
 Connect one end of the other lead to
the negative terminal of the booster
battery (3).
 

 
 Connect the other end to the ground
point indicated in the illustration
away from the discharged battery (4).
5. Start the engine of the booster vehicle
and run it a few minutes. Then start the
engine of the other vehicle.
6. When ¿ nished, carefully disconnect the
leads in the reverse order described in
the illustration. 7. If the battery cover has been removed,
install it in the reverse order of
removal.
NOTE
Verify that the covers are securely
installed.
/:A(.'',A'FKVKQPKPFD

7–26
If Trouble Arises
When Fuel-Filler Flap Cannot be Opened
When Fuel-Filler Flap
Cannot be Opened
If the battery is dead, the fuel-¿ ller À ap
cannot be opened.
In this case, the fuel-¿ ller À ap can be
opened by taking care of the dead battery
situation.
Refer to Jump-Starting on page 7-20 .
If the fuel-¿ ller À ap cannot be opened
even if the dead battery situation has been
resolved, the electrical system may have a
malfunction.
In this case, the fuel-¿ ller À ap can be
opened using the following procedure as
an emergency measure.
1. Open the boot lid.
Refer to Opening and Closing the Boot
Lid on page 3-22 .
2. Pull the centre section of the plastic
fastener and remove the fasteners.
3. Partially peel back the cover inside the
boot, then pull the emergency release
lever.
Emergency release
lever
/:A(.'',A'FKVKQPKPFD

7–35
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
*Some models.
Signal Warning
(Amber)
Electric Vacuum
Pump Warning
Light The light turns on if the electric vacuum pump system has a problem. Have your vehicle
inspected at an expert repairer, we recommend an Authorised Mazda Repairer.
ABS Warning Light If the ABS warning light stays on while you're driving, the ABS control unit has detected a
system malfunction. If this occurs, your brakes will function normally as if the vehicle had
no ABS.
Should this happen, consult an expert repairer, we recommend an Authorised Mazda
Repairer as soon as possible.
NOTE
When the engine is jump-started to charge the battery, uneven rpm occurs and the ABS
warning light may illuminate. If this occurs, it is the result of the weak battery and
does not indicate an ABS malfunction.
Recharge the battery.
The brake assist system does not operate while the ABS warning light is illuminated.
Check Engine Light If this light illuminates while driving, the vehicle may have a problem. It is important to
note the driving conditions when the light illuminated and consult an expert repairer, we
recommend an Authorised Mazda Repairer.
The check engine light may illuminate in the following cases:
The engine's electrical system has a problem. The emission control system has a problem. The fuel tank level being very low or approaching empty. The fuel-¿ ller cap is missing or not tightened securely.
If the check engine light remains on, or it À ashes continuously , do not drive at high speeds
and consult an expert repairer, we recommend an Authorised Mazda Repairer as soon as
possible.
(Amber)
i-stop Warning
Light
*
When the light is turned on
A problem in the system may be indicated under the following conditions. Have your
vehicle inspected at an expert repairer, we recommend an Authorised Mazda Repairer.
The light does not turn on when the ignition is switched ON. The light continues to remain on even though the i-stop OFF switch has been pressed
while the engine is running.
When the light is À ashing
The light continues to À ash if the system has a malfunction. Have your vehicle inspected at
an expert repairer, we recommend an Authorised Mazda Repairer.
(Amber)
i-ELOOP
Indication/Warning
Light
*
The Warning indication/Warning light turns on if there is any malfunction in the i-ELOOP
system. Consult an expert repairer, we recommend an Authorised Mazda Repairer.
/:A(.'',A'FKVKQPKPFD

7–55
If Trouble Arises
When Boot Lid Cannot be Opened
When Boot Lid Cannot be
Opened
If the battery is dead, the boot cannot be
unlocked and opened.
In this case, the boot can be unlocked by
taking care of the dead battery situation.
Refer to Jump-Starting on page 7-20 .
If the boot cannot be unlocked even
if the dead battery situation has been
resolved, the electrical system may have a
malfunction.
Soft top model
1. Close the convertible top.
Refer to Raising the Convertible Top
on page 3-41 .
2. Remove the windblocker.
Windblocker
3. Remove the fasteners on the right side
of the vehicle.
4. Partially peel back the cover on the
right side of the vehicle.
5. Turn and loosen the cap screws until
the screws start to spin free.
/:A(.'',A'FKVKQPKPFD

10–2
Index
1
120 km/h warning beep ....................... 7-53
A
Accessory Socket .............................. 5-125
Active Bonnet Warning Beep.............. 7-50
Adaptive Front Lighting System
(AFS)................................................. 4-102
Add-On Non-Genuine Parts and
Accessories ........................................... 8-3
Adjustable Speed Limiter ................. 4-122
Activation/deactivation ............... 4-125
Adjustable speed limiter display ... 4-123
Adjustable speed limiter main
indication (white) ........................ 4-124
Adjustable speed limiter main indicator
light (amber) ................................ 4-124
Adjustable speed limiter set indication
(green) ......................................... 4-124
Adjustable speed limiter set indicator
light (green) ................................. 4-124
Setting the system ....................... 4-127
Speed limiter warning beep ......... 4-124
Temporarily cancelling the
system .......................................... 4-128
Adjustable Speed Limiter Display ...... 4-30
Advanced Key
Advanced keyless entry system ...... 3-9
Operational range .......................... 3-10
Air Bag/Seat Belt Pretensioner System
Warning Beep ...................................... 7-49
Air Bag Systems ................................. 2-33
Air-Conditioning System ...................... 5-2
Fully automatic type ...................... 5-10
Manual type ..................................... 5-5
Operating tips .................................. 5-2
Vent operation ................................. 5-3
Ambient Temperature Display ... 4-29, 4-37
Antilock Brake System (ABS) ............ 4-86
Ashtray .............................................. 5-133 Audio Control Switch
Adjusting the volume .................... 5-70
Mute switch ................................... 5-71
Seek switch.................................... 5-70
Audio System ...................................... 5-14
Aerial ............................................. 5-14
Audio control switch ..................... 5-69
Audio set
[Type A (non-touchscreen)] ........... 5-28
Audio set
[Type B/Type C (touchscreen)] ..... 5-44
AUX/USB mode ........................... 5-71
Operating tips for audio system .... 5-14
Automatic Transmission ..................... 4-51
Active Adaptive Shift (AAS) ........ 4-53
Direct mode ................................... 4-61
Driving tips.................................... 4-61
Manual shift mode......................... 4-55
Shift-lock override ........................ 4-54
Shift-lock system ........................... 4-54
Shift position indication ................ 4-52
Transmission ranges ...................... 4-52
Warning light ................................. 4-52
B
Back Trim Storage Box ..................... 5-132
Battery ................................................. 6-28
Inspecting electrolyte level ........... 6-30
Maintenance .................................. 6-30
Recharging .................................... 6-30
Replacement .................................. 6-30
Speci¿ cations .................................. 9-4
Battery Runs Out ................................. 7-20
Jump-starting ................................. 7-20
Blind Spot Monitoring (BSM) .......... 4-112
Blind Spot Monitoring (BSM)
switch .......................................... 4-117
Blind Spot Monitoring (BSM) System
warning beep ....................................... 7-54
/:A(.'',A'FKVKQPKPFD