2017 MAZDA MODEL CX-5 oil

*5 Also inspect the air conditioner drive belts, if installed.If the vehicle is operated primarily under any of the following conditions, inspect the drive belts more often
than the recommended intervals.
a) Driving in dusty conditions
b) Extended periods of idli ng or low speed operation
c) Driving for long period in cold temperatures or driving regularly at short distance only
d) Driving in extremely hot conditions
e) Driving in mountainous conditions continually
*6 Use of FL-22 is recommended when replacing engine coolant. Using engine coolant other than FL-22 may
cause serious damage to the engine and cooling system.
*7 If the vehicle is operated in v ery dusty or sandy areas, clean and if necessary, replace the air filter more often
than the recommended intervals.
*8 Inspect the battery electrolyte level, specific gravity and outer appearance. If the vehicle is operated in
extremely hot and cold areas, ins pect the battery electrolyte level, specific gravity and appearance every
10,000 km (6,250 miles) or 6 months. The sealed battery only requires an outer appearance inspection.
*9 If the brakes are used extensively (for example, continuous ha rd driving or mountain driving) or if the vehicle
is operated in extremely humid c limates, replace the brake fluid annually.
*10 If this component has been submerged in water, the oil should be replaced.*11 Check the tyre repair fluid e xpiration date every year when performing the periodic maintenance. Replace the
tyre repair fluid bottle with new one before the expiration date.
Maintenance and Care
Scheduled Maintenance
6-16
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Maintenance Monitor
▼Maintenance Monitor (Type A audio)
“Oil Change” with flexible setting*1 is available. Consult an Au
thorised Mazda Repairer for
details
*2. When the engine oil flexible maintenance setting is selected, the wrench indicator
light in the instrument cluster w ill be illuminated when remaining oil life becomes less than
1,000 km (600 mile), or remaining days are less than 15 (Whiche ver comes first).
Reset method
Press and hold the instrument panel illumination knob with the ignition switched off, then
switch it on. Keep pressing the instrument panel illumination k nob for more than 5 seconds.
The master warning light will flash for a few seconds when the reset is completed.
Instrument panel illumination knob
*1 The engine oil flexible maintenance setting is available (only some models). Based on
the engine operating conditions, the onboard computer in your v ehicle calculates the
remaining oil life.
*2 When the engine oil flexible maintenance setting is selected, the system must be reset
whenever replacing the engine oil regardless of the wrench indi cator light display.
Maintenance and Care
Scheduled Maintenance
6-17
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

▼Maintenance Monitor (Type B audio)
1. Select the icon on the home screen to display the “Applications” screen.
2. Select “Vehicle Status Monitor”.
3. Select “Maintenance” to display the maintenance list screen.
4. Switch the tab and select the setting item you want to change .
You can customize settings in the setup display as follows:
Ta b I t e m E x p l a n a t i o n
Scheduled Setting
Notification can be switched on/off.
Time (months) Displays the time or distance until maintenance is due.
Select this item to set the maintenance period.
The wrench indication/indicator light in the instrument cluster
will be illuminated when the remaining distance is less than 1, 000
km or 600 mile, or the remaining number of days is less than 15
(whichever comes first).
Distance (km or mile)
Reset
Resets the time and distance to the initial values.
Once the system turns on, it needs to be reset whenever carrying
out maintenance.
Tyre Rotation Setting
Notification can be switched on/off.
Distance (km or mile) Displays the distance until tyre rotation is due.
Select this item to set the tyre rotation distance.
The wrench indication/indicator
light in the instrument cluster
will be illuminated when the remaining distance is less than 1, 000
km or 600 mile.
Reset Resets the remaining distance to the initial value.
Once the system turns on, it need
s to be reset whenever rotating
the tyres.
Oil Change Setting
*1Notification can be switched on/off.
Distance (km or mile) Displays the distance until
the oil replacement is due.
Select this item to set the oil replacement distance.
The wrench indication/indicator light in the instrument cluster
will be illuminated when the remaining distance is less than 1, 000
km or 600 mile.
Reset
*2Resets the remaining distance to the initial value.
Once the system turns on, it need s to be reset whenever replacing
the engine oil.
*1 The engine oil flexible mainten ance setting is available (only some models). Consult an Authorised Mazda
Repairer for details.
When the engine oil flexible mai ntenance setting is selected, you will see the following items in the display.
The vehicle calculates the remaining oil life based on the engi ne operating conditions and lets you know when
an oil change is due by illuminating the wrench indicator light in the instrument cluster.
*2 Whenever the engine oil is replaced, the vehicle engine control unit reset is necessary for SKYACTIV-D 2.2.
Your Authorised Mazda Repairer will be able to reset the engine control unit or refer to the vehicle engine
control unit reset procedure on page 6-27.
Maintenance and Care
Scheduled Maintenance
6-18
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

TabItem Explanation
Oil Change Oil life (%) Displays the engine oil life un
til the oil replacement is due.
The wrench indication/indicator l ight in the instrument cluster
will be illuminated when remai ning oil life distance is less
than 1,000 km (600 mile), or remaining days are less than 15
(whichever comes first).
Reset Resets the remaining oil life to 100 %.
The system must be reset whenever replacing the engine oil.
Maintenance and Care
Scheduled Maintenance
6-19
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Owner Maintenance Precautions
Routine Service
We highly recommend that these items be inspected daily, or at least every week.
•Engine Oil Level (page 6-28)
•Engine Coolant Level (page 6-29)
•Brake and clutch Fluid Level (page 6-31)
•Washer Fluid Level (page 6-32)
•Battery Maintenance (page 6-39)
•Tyre Inflation Pressure (page 6-43)

Improper or incomplete service may result in problems. This sec tion gives instructions only
for items that are easy to perform.

As explained in the Introduction (page 6-2), several procedures can be done only by a
qualified service technician with special tools.

Improper do-it yourself maintena nce during the warranty period may affect warranty
coverage. For details, read the s eparate Mazda Warranty statement provided with the
vehicle. If you are unsure about any servicing or maintenance p rocedure, have it done by an
expert repairer, we recommend an Authorised Mazda Repairer.

There are strict environmental laws regarding the disposal of w aste oil and fluids. Please
dispose of your waste properly and with due regard to the envir onment.

We recommend that you entrust the oil and fluid changes of your vehicle to an Authorised
Mazda Repairer.
WA R N I N G
Do not perform maintenance work if you lack sufficient knowledge and experience or the
proper tools and equipment to do the work. Have maintenance work done by a qualified
technician:
Performing maintenance work on a vehicle is dangerous if not done properly. You can be
seriously injured while performing some maintenance procedures.
Maintenance and Care
Owner Maintenance
6-20
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

▼Closing the Bonnet
1. Check under the bonnet area to make
certain all filler caps are in place and
all loose items (e.g. tools, oil
containers, etc.) have been removed.
2. Lift the bonnet, grasp the padded area on the support rod, and secure the
support rod in the clip. Verify that the
support rod is secured in the clip
before closing the bonnet.

Clip ClipClip
3. Lower the bonnet slowly to a height of
about 20 cm (7.9 in) above its closed
position and then let it drop.
CAUTION
When closing the bonnet, do not push it
excessively such as by applying your
weight. Otherwise, the bonnet could be
deformed.
Maintenance and Care
Owner Maintenance
6-23
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Engine Compartment Overview
Windscreen washer fluid reservoir
Engine oil-filler cap
Engine oil dipstick Battery
Cooling system cap
Engine coolant reservoir
Windscreen washer fluid reservoir
Engine oil-filler capBrake/Clutch fluid reservoir
Engine oil dipstick Battery
Fuse block
Cooling system cap Engine coolant reservoir
SKYACTIV-D 2.2
SKYACTIV-G 2.0 and SKYACTIV-G 2.5
Brake/Clutch fluid reservoir
Fuse block
Maintenance and Care
Owner Maintenance
6-24
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Engine Oil
NOTE
Changing the engine oil should be done by an expert repairer, we recommend an Authorised
Mazda Repairer.
▼Recommended Oil
In order to keep the maintenance interval (page 6-3) and to protect the engine from damage
caused by poor lubrication, it is vitally important to make use
of engine oil with the correct
specification. Do not use oils which do not meet the following specifications or
requirements. Use of unsuitable o il may lead to engine damage which is not covered by the
Mazda Warranty.

Temperature Range SAE Viscosity Numbers
Mazda Original Oil Ultra 5W-30 API SN or ACEA A5/B5
Mazda Original Oil Supra 0W-20
Alternative Oil QualityRecommended oils
(Europe)
(Except Europe)
–30 –20 –10 0
1020 30
40
–200
20 40
60 80100
–40
–40
Grade Grade
Temperature Range SAE Viscosity Numbers
API SL/SM/SN or ILSAC GF-III/GF-IV/GF-V
–30 –20 –10 0 1020 30
40
–200
20 40
60 80100
–40
–40
SKYACTIV-G 2.0 and SKYACTIV-G 2.5
5W-30 0W-20
*1 Use API SM/SN in Kazakhstan.
*1
Maintenance and Care
Owner Maintenance
6-25
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2