2017 MAZDA MODEL CX-5 display

NOTE
Because there may be a difference between the displayed image, such as indicated below,
and the actual conditions when parking, always verify the safety at the rear of the vehicle
and the surrounding area directly with your eyes.
•In the image of the parking space (or garage) displayed on the screen, the back end and
distance guide lines may appear aligned in the monitor, but they may not actually be
aligned on the ground.
•When parking in a space with a division line on only one side of the parking space, the
division line and the vehicle width guide line appear aligned in the monitor, but they may
not actually be aligned on the ground.
Fixed assist lines display type
NOTE
Images displayed on the monitor from the rear view parking camera are reversed images
(mirror images).
1. Shift the shift lever (manual transaxle) or the selector leve r (automatic transaxle) to
reverse (R) to switch the displa y to the rear view monitor display.
When Driving
Rear View Monitor
4-224
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

2. Confirming the surrounding conditions, reverse the vehicle.

(Display condition) (Vehicle condition)
3. After your vehicle begins entering the parking space, continu e backing up slowly so that
the distance between the vehicle width lines and the sides of t he parking space on the
left and right are roughly equal.
4. Continue to adjust the steering wheel until the vehicle width guide lines are parallel to
the left and right sides of the parking space.
5. Once they are parallel, straighten the wheels and back your v ehicle slowly into the
parking space. Continue checkin g the vehicle's surroundings and then stop the vehicle in
the best possible position. (If the parking space has division lines, check whether the
vehicle width guide lines are parallel to them.)

(Display condition) (Vehicle condition)
6. When the shift lever (manual transaxle) or the selector lever (automatic transaxle) is
shifted from reverse (R) to anot her shift lever (manual transaxle) or the selector lever
(automatic transaxle) position, the screen returns to the previ ous display.
When Driving
Rear View Monitor
4-225
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

NOTE
Because there may be a difference between the displayed image, such as indicated below,
and the actual conditions when parking, always verify the safety at the rear of the vehicle
and the surrounding area directly with your eyes.
•In the image of the parking space (or garage) displayed on the screen, the back end and
distance guide lines may appear aligned in the monitor, but they may not actually be
aligned on the ground.
•When parking in a space with a division line on only one side of the parking space, the
division line and the vehicle width guide line appear aligned in the monitor, but they may
not actually be aligned on the ground.
▼Variance Between Actual Road C onditions and Displayed Image
Some variance occurs between the actual road and the displayed road. Such variance in
distance perspective could lead to an accident. Note the follow ing conditions that may cause
a variance in distance perspective.
When the vehicle is tilted due to the weight of passengers and load
When the vehicle rear is lowered, the object displayed on the screen appears farther than the
actual distance.
Variance
Object
When Driving
Rear View Monitor
4-226
2017-6-7 7:51:19Form No. CX-5 8FY4-EE-17E+L_Edition2

When there is a steep grade behind the vehicle
When there is a steep upgrade (downgrade) behind the vehicle, t he object displayed on the
screen appears farther (downgrade: closer) than the actual dist ance.
A
AB
B
Appears
farther than
actual
distance
Object at actual
position
Object at actual position
Object on screen
A: Distance between the vehicle and object displayed on the screen.
B: Actual distance between the vehicle and object. Object on screenAppears
closer than
actual
distance
Three-dimensional ob
ject on vehicle rear
Because the distance guide lines are displayed based on a flat surface, the distance to the
three-dimensional object displayed on the screen is different f rom the actual distance.
A
A
C B
CB
(Actual distance) B>C=A
Sensed distance on screen A>B>C (Screen display)
(Actual condition)
When Driving
Rear View Monitor
4-227
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

(Predicted vehicle path assist lines display type)
When reversing near a thr ee-dimensional object
When reversing near an overhanging object, the vehicle may hit the object even if the
anticipated course line does not c ontact the object on the screen. The position of the object
displayed on the screen is different from the actual position b ecause the anticipated course
lines on the screen are displayed based on a horizontal road surface. When backing up near
an overhanging object, confirm the rear and surrounding conditi ons directly with your eyes.
(Screen display)(Actual view)
▼Picture Quality Adjustment
WA R N I N G
Always adjust the picture quality of the rear view monitor while the vehicle is stopped:
Do not adjust the picture quality of the rear vi
ew monitor while driving the vehicle. Adjusting
the picture quality of the rear view monitor such as brightness, contrast, colour, and tint while
driving the vehicle is dangerous as it could di stract your attention from the vehicle operation
which could lead to an accident.
Picture quality adjustment must b e done while the shift lever (manual transaxle) or the
selector lever (automatic transaxle) is in reverse (R).
There are four settings which can be adjusted including, bright ness, contrast, tint, and
colour. When adjusting, pay sufficient attention to the vehicle surroundings.
1. Select the
icon on the screen to display the tabs.
2. Select the desired tab item.
3. Adjust the brightness, contrast, tint, and colour using the s lider.
If you need to reset, p ress the reset button.
4. Select the
icon on the screen to close the tab.
When Driving
Rear View Monitor
4-228
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

NOTE
•(Automatic transaxle vehicle)
The detection indicator and buzzer of the front sensors/front corner sensors do not
operate when the selector lever is in the P position.
•The detection indicator and buzzer sound do not activate when the parking brake is
applied.
▼Obstruction Detection Indication
The position of a sensor which has detected an obstruction is i
ndicated. The gauge
illuminates in different areas d epending on the distance to an obstruction detected by the
sensor.
As the vehicle approaches closer to an obstruction, the zone in the gauge closer to the
vehicle illuminates.

Front left corner
sensor gauge Front right corner
sensor gauge
Rear right corner
sensor gauge
Rear left corner
sensor gauge Front sensor gauge
Rear sensor gauge
NOTE
The detection indicator can switch between display and non-display.
Refer to Personalisation Features on page 9-12.
System problem notification
If any of the pr oblems indicated in the table occurs, the driver is notified of the problem
depending on the type of system as shown.
Detection Indicator Solution
Disconnection
The system may have a ma lfunction. Have the ve-
hicle inspected at an expert repairer, we recom-
mend an Authorised Mazda Repairer as soon as
possible.
When Driving
Parking Sensor System
4-232
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Audio Set [Type B
(touchscreen)]...................................5-71Basic Operation Method............. 5-71
Home screen............................... 5-75
Volume/Display/Sound
Controls...................................... 5-76
Operating the Radio. ...................5-78
Operating the Digital Audio
Broadcasting (DAB) Radio
*....... 5-81
Operating the Compact Disc (CD)
Player
*........................................ 5-83
Operating the Digi tal Versatile Disc
(DVD) Player
*............................ 5-86
How to use AUX mode.............. 5-89
How to use USB mode............... 5-90
Bluetooth
®.................................. 5-95
Bluetooth
® Preparation.............. 5-98
Available Language
*................ 5-100
Bluetooth
® Audio.....................5-101
How to Use Aha™................... 5-105
How to Use Stitcher ™ Radio... 5-108
Bluetooth
® Hands-Free............ 5-110
Voice Recognition.. ...................5-118
Settings..................................... 5-122
Applications..............................5-124
Troubleshooting. ....................... 5-125
Appendix........................................ 5-130
Things You Need to Know....... 5-130
Interior Equipment....................... 5-142 Sunvisors.................................. 5-142
Interior Lights...........................5-142
Accessory Sockets.................... 5-144
USB Power Outlet
*.................. 5-146
Cup Holder............................... 5-147
Bottle Holder............................ 5-148
Storage Compartmen ts............. 5-148
Removable Ashtray
*................ 5-152
5-2*Some models.
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Fully Automatic Type
Air-conditioning system information is displayed on the display.
Airflow display
Temperature setting display (Driver’s side)
Mode selector
display
A/C mode display
Temperature setting display (Passenger’s side)
Air intake selector
(recirculated air position)
Air intake selector
(outside air position)
Driver temperature control dial
AUTO switch Mode selector switch
Fan control switch OFF switch
Windscreen defroster switch
Rear window defogger switch
Passenger temperature
control dial
DUAL switch
A/C switch
▼
Control Switches
AUTO switch
By pressing the AUTO switch the
following functions will be automatically
controlled in accordan
ce with the selected
set temperature:
•Airflow temperature
•Amount of airflow
•Selection of airflow mode
•Outside/Recirculated air selection
•Air conditioner operation
•A/C or A/C ECO selection
NOTE
AUTO switch indicator light
•When on, it indicates auto operation,
and the system will function
automatically.
•If any of the following switches are
operated while in auto control, the
AUTO switch indicator turns off.
•Mode selector switch
•Fan control switch
•Windscreen defroster switch
The functions for switches other than
those operated continue to operate in
auto control.
OFF switch
Pressing the OFF switch shuts off the
air-conditioning system.
Interior Features
Air-Conditioning System
5-11
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2