2017 MAZDA MODEL CX-3 fuses

4–85
When Driving
i-ACTIVSENSE
N O T E
 


y When the ignition is switched off, the
condition before the system was turned
off is maintained. For example, if the
ignition is switched OFF while the
Blind Spot Monitoring (BSM) and Rear
Cross Traf¿ c Alert (RCTA) systems are
operational, the Blind Spot Monitoring
(BSM) and Rear Cross Traf¿ c Alert
(RCTA) systems remain operational the
next time the ignition is switched ON.
 


y The Blind Spot Monitoring (BSM) and
Rear Cross Traf¿ c Alert (RCTA) systems
are turned off when the battery is
disconnected such as when the battery
terminals or fuses have been removed
and re-installed. To turn the Blind Spot
Monitoring (BSM) and Rear Cross
Tr a f¿ c Alert (RCTA) systems back on,
press the Blind Spot Monitoring (BSM)
switch.

%:A(*'#'A'FKVKQPKPFD%:A(*'#'A'FKVKQPKPFD

6–1
6Maintenance and Care
How to keep your Mazda in top condition.


Essential Information ........................................................................ 6-2
Introduction ................................................................................... 6-2

Scheduled Maintenance ..................................................................... 6-4
Scheduled Maintenance (U.S.A., Canada, and Puerto Rico) ........ 6-4
Scheduled Maintenance (Mexico) .............................................. 6-13
Maintenance Monitor .................................................................. 6-20

Owner Maintenance ......................................................................... 6-22
Owner Maintenance Precautions ................................................ 6-22
Hood ............................................................................................ 6-24
Engine Compartment Overview ................................................. 6-26
Engine Oil ................................................................................... 6-27
Engine Coolant ............................................................................ 6-30
Brake Fluid .................................................................................. 6-32
Window Washer Fluid ................................................................. 6-32
Body Lubrication ........................................................................ 6-33
Wiper Blades ............................................................................... 6-34
Battery ......................................................................................... 6-37
Key Battery Replacement ........................................................... 6-39
Tires............................................................................................. 6-42
Light Bulbs .................................................................................. 6-46
Fuses ........................................................................................... 6-53

Appearance Care.............................................................................. 6-59
Exterior Care ............................................................................... 6-59
Interior Care ................................................................................ 6-65
%:A(*'#'A'FKVKQPKPFD%:A(*'#'A'FKVKQPKPFD

6–53
Maintenance and Care
Owner Maintenance
Overhead lights (Rear)


Edge

3. Install the new bulb in the reverse order
of the removal procedure.

Luggage compartment light
1. Wrap a small À athead screwdriver
with a soft cloth to prevent damage to
the lens and remove the lens unit by
carefully prying on the edge of the lens
unit with the À athead screwdriver.
2. Disconnect the bulb by pulling it out.



3. Install the new bulb in the reverse order
of the removal procedure.

Fuses
Your vehicle's electrical system is
protected by fuses.

If any lights, accessories, or controls do
not work, inspect the appropriate circuit
protector. If a fuse has blown, the inside
element will be melted.

If the same fuse blows again, avoid using
that system and consult an Authorized
Mazda Dealer as soon as possible.
Fuse Replacement
Replacing the fuses on the vehicle's left
side
If the electrical system does not work, ¿ rst
inspect the fuses on the vehicle's left side.


1. Make sure the ignition is switched off,
and other switches are off.
2. Open the fuse panel cover.


%:A(*'#'A'FKVKQPKPFD%:A(*'#'A'FKVKQPKPFD

6–54
Maintenance and Care
Owner Maintenance
3. Pull the fuse straight out with the
fuse puller provided on the fuse block
located in the engine compartment.


4. Inspect the fuse and replace it if it is
blown.

NormalBlown

5. Insert a new fuse of the same amperage
rating, and make sure it ¿ ts tightly. If
it does not ¿ t tightly, have an expert
install it. We recommend an Authorized
Mazda Dealer.
If you have no spare fuses, borrow one
of the same rating from a circuit not
essential to vehicle operation, such as
the AUDIO or OUTLET circuit.
CAUTION
Always replace a fuse with a genuine
Mazda fuse or equivalent of the same
rating. Otherwise you may damage
the electric system.

6. Reinstall the cover and make sure that
it is securely installed.

Replacing the fuses under the hood
If the headlights or other electrical
components do not work and the fuses
in the cabin are normal, inspect the fuse
block under the hood. If a fuse is blown, it
must be replaced. Follow these steps:


1. Make sure the ignition is switched off,
and other switches are off.
2. Remove the fuse block cover.


3. If any fuse but the MAIN fuse is
blown, replace it with a new one of the
same amperage rating .

Normal
Blown

%:A(*'#'A'FKVKQPKPFD%:A(*'#'A'FKVKQPKPFD

6–55
Maintenance and Care
Owner Maintenance
WARNING
Do not replace the main fuse and
multiplex slow blow fuse by yourself.
Have an Authorized Mazda Dealer
perform the replacement:
Replacing these fuses by yourself is
dangerous because they are high
current fuses. Incorrect replacement
could cause an electrical shock or a
short circuit resulting in a fi re.

4. Reinstall the cover and make sure that
it is securely installed.

%:A(*'#'A'FKVKQPKPFD%:A(*'#'A'FKVKQPKPFD

9–9
Speci¿ cations
Speci¿ cations
Temporary spare tire
(U.S.A. and Canada)
Tire size InÀ ation pressure
T125/90D16 98M 420 kPa (60 psi)

(Mexico)
Tire size InÀ ation pressure
185/60R16 86M 300 kPa (3.0 bar, 44 psi)

Lug nut tightening torque
When installing a tire, tighten the lug nut to the following torque.
108—147 N·m (12—14 kgf·m, 80—108 ft·lbf)
Fuses
Refer to Fuses on page 6-53 .
%:A(*'#'A'FKVKQPKPFD%:A(*'#'A'FKVKQPKPFD

10–4
F
Flasher
Hazard warning ............................. 4-53
Headlights ..................................... 4-41
Flat Tire ................................................. 7-3
Mounting the Spare Tire................ 7-13
Removing a Flat Tire ..................... 7-10
Floor Mat ............................................ 3-42
Fluid
Brake ............................................. 6-32
Washer ........................................... 6-32
Fluids
Classi¿ cation ................................... 9-4
Fog Lights ........................................... 4-46
Foot Brake ........................................... 4-54
Forward Sensing Camera (FSC) ....... 4-111
Front Seat .............................................. 2-5
Fuel
Filler lid and cap............................ 3-27
Gauge ............................................ 4-18
Requirements................................. 3-24
Tank capacity .................................. 9-5
Fuel Consumption Display ................. 4-62
Fuel Economy Monitor ....................... 4-62
Ending screen display ................... 4-63
Fuel consumption display ............. 4-62
Fuses ................................................... 6-53
Panel description ........................... 6-56
Replacement .................................. 6-53
G
Gauges ................................................. 4-12
Glove Compartment .......................... 5-135
H
Hazard Warning Flasher ...................... 4-53
Hazardous Driving .............................. 3-42
Head Restraint ..................................... 2-10 Headlights
Coming home light ........................ 4-44
Control........................................... 4-41
Flashing ......................................... 4-44
High-low beam .............................. 4-44
Leaving home light ....................... 4-45
Leveling......................................... 4-45
High Beam Control System (HBC) .... 4-71
Hill Launch Assist (HLA) ................... 4-56
Hood Release ...................................... 6-24
Horn .................................................... 4-53
I
i-ACTIV AWD Operation ................... 4-65
i-ACTIVSENSE .................................. 4-68
Active Safety Technology ............. 4-68
Adaptive Front Lighting System
(AFS) ............................................. 4-70
Blind Spot Monitoring (BSM) ...... 4-80
Camera and sensors ....................... 4-69
Distance Recognition Support System
(DRSS) .......................................... 4-86
Forward Sensing Camera (FSC) ... 4-111
High Beam Control System
(HBC) ............................................ 4-71
Lane Departure Warning System
(LDWS) ......................................... 4-74
Laser Sensor ................................ 4-117
Mazda Radar Cruise Control
(MRCC)......................................... 4-92
Pre-Crash Safety Technology ........ 4-68
Radar Sensors (Rear)................... 4-120
Radar sensor (front)..................... 4-114
Rear Cross Traf¿ c Alert (RCTA) ... 4-89
Smart Brake Support (SBS) ........ 4-108
Smart City Brake Support
(SCBS) ........................................ 4-103
If a Warning Light Turns On or
Flashes................................................. 7-27
If the Active Driving Display does not
operate ................................................. 7-45
Index
%:A(*'#'A'FKVKQPKPFD%:A(*'#'A'FKVKQPKPFD