Page 168 of 723
4–28
When Driving
Instrument Cluster and Display
NOTE
After refuelling, it may require some
time for the indicator to stabilize. In
addition, the indicator may deviate
while driving on a slope or curve
since the fuel moves in the tank.
The display indicating a quarter
or less remaining fuel has more
segments to show the remaining fuel
level in greater detail.
The direction of the arrow ( )
indicates that the fuel- ¿ ller À ap is on
the left side of the vehicle.
(SKYACTIV-D 1.5)
If inconsistency in engine performance
or stalling occurs due to low fuel level
conditions, refuel the vehicle as soon as
possible and add at least 10 L (2.7 US gal,
2.2 Imp gal) of fuel.
Instrument Panel Illumination
When the position lights are turned
on with the ignition switched ON,
the brightness of the instrument panel
illumination is dimmed.
NOTE
When the position lights are turned on,
the position lights indicator light in the
instrument cluster turns on.
Refer to Headlights on page 4-59 .
The brightness of the instrument cluster
and instrument panel illuminations can be
adjusted by rotating the knob.
The brightness decreases by rotating the
knob to the left. A beep sound will be
heard when the knob has been rotated to
the maximum dim position.
The brightness increases by rotating the
knob to the right.
Dim
Bright
Page 169 of 723
4–29
When Driving
Instrument Cluster and Display
Function for cancelling illumination
dimmer
The illumination dimmer can be
cancelled by rotating the instrument panel
illumination knob to the right until a beep
sound is heard while the instrument cluster
is dimmed with the ignition switched
ON. If the instrument cluster's visibility
is reduced due to glare from surrounding
brightness, cancel the illumination
dimmer.
NOTE
When the illumination dimmer is
cancelled, the instrument cluster
cannot be dimmed even if the
position lights are turned on.
When the illumination dimmer is
cancelled, the screen in the centre
display switches to constant display
of the daytime screen.
Outside Temperature Display
When the ignition is switched ON, the
outside temperature is displayed.
NOTE
Under the following conditions, the
outside temperature display may differ
from the actual outside temperature
depending on the surroundings and
vehicle conditions:
Signi ¿ cantly cold or hot
temperatures.
Sudden changes in outside
temperature.
The vehicle is parked.
The vehicle is driven at low speeds.
Changing the Temperature Unit of the
Outside Temperature Display (Vehicles
with Type B audio)
The outside temperature unit can be
switched between Celsius and Fahrenheit.
Settings can be changed by operating the
centre display screen.
Refer to Personalisation Features on page
9-13 .
NOTE
When the temperature unit indicated
in the outside temperature display is
changed, the temperature unit indicated
in the engine coolant gauge display
changes in conjunction with it.
Page 176 of 723
4–36
When Driving
Instrument Cluster and Display
Warning/Indicator Lights
Instrument Cluster varies depending on model and speci ¿ cations.
Type A
Type B (Digital Speed Meter Type)
(Analog Speed Meter Type) Instrument Cluster
Warning Lights
These lights turn on or À ash to notify the user of the system operation status or a system
malfunction.
Signal Warning Page
Brake System Warning Light *1*2 7-49
ABS Warning Light *1 Electronic
Brake Force
Distribution
System Warning
7-49
ABS warning
7-52
Charging System Warning Light *1 7-49
Engine Oil Warning Light *1 7-49
(Red) High Engine Coolant Temperature Warning Light *1 7-49
Power Steering Malfunction Warning Light *1 7-49
Page 177 of 723
4–37
When Driving
Instrument Cluster and Display
*Some models.
Signal Warning Page
Master Warning Light *1 7-52
Check Engine Light *1 7-52
(Amber) * i-stop Warning Light *1 7-52
(Amber) * i-ELOOP Warning Light 7-52
* Automatic Transaxle Warning Light *1 7-52
Air Bag/Seat Belt Pretensioner System Warning Light *1 7-52
* Tyre Pressure Monitoring System Warning Light *1 Flashing
7-52
Turns on
7-58
(Red) KEY Warning Light *1 Malfunction
7-52
Except
malfunction
7-58
(Amber) * High Beam Control System (HBC) Warning Light *1 7-52
(Amber) * Adaptive LED Headlights (ALH) Warning Light *1 7-52
* Lane Departure Warning System (LDWS) Warning Light *1 Flashing
4-115
Turns on
7-52
(Amber) * Mazda Radar Cruise Control (MRCC) Warning Light 7-52
* LED Headlight Warning Light *1 7-52
Page 178 of 723
4–38
When Driving
Instrument Cluster and Display
*Some models.
Signal Warning Page
Low Fuel Warning Light 7-58
Seat Belt Warning Light (Front seat) 7-58
(Red) * Seat Belt Warning Light (Rear seat) 7-58
* Door-Ajar Warning Light 7-58
* Low Washer Fluid Level Warning Light 7-58
* 120 km/h Warning Light *1 7-58
(Amber) * Smart Brake Support/Smart City Brake Support (SBS/SCBS) Warning
Light *1 7-58
*1 The light turns on when the ignition is switched on for an operation check, and turns off a few seconds later or
when the engine is started. If the light does not turn on or remains turned on, have the vehicle inspected at an
expert repairer, we recommend an Authorised Mazda Repairer.
*2 The light turns on continuously when the parking brake is applied.
Indicator Lights
These lights turn on or À ash to notify the user of the system operation status or a system
malfunction.
Signal Indicator Lights Page
* Passenger Air Bag Deactivation Indicator Light *1 2-47
(Green) * Seat Belt Indicator Light (Rear seat) 2-19
(Green) KEY Indicator Light 4-5
Page 179 of 723
4–39
When Driving
Instrument Cluster and Display
*Some models.
Signal Indicator Lights Page
Security Indicator Light *1 3-45
* Glow Indicator Light *1 4-43
* Diesel Particulate Filter Indicator Light *1 4-202
Wrench Indicator Light *1 4-42
(Blue) Low Engine Coolant Temperature Indicator Light 4-43
(Green) * i-stop Indicator Light 4-18
(Green) * i-ELOOP Indicator Light 4-90
* Vehicle Speed Alarm Indication 4-30
Shift Position Indication 4-50
Lights-On Indicator Light 4-59
Headlight High-Beam Indicator Light Headlight High-
Low Beam
4-64
Flashing the
Headlights
4-64
Direction Indicator/Hazard Warning Indicator Lights Turn and Lane-
Change Signals
4-69
Hazard Warning
Flasher
4-77
* Front Fog Light Indicator Light 4-67
Page 182 of 723
4–42
When Driving
Instrument Cluster and Display
*Some models.
Signal Indicator Lights Page
(White) * Cruise Main Indication 4-194
(White/Green) * Cruise Set Indication/Indicator Light 4-194
*1 The light turns on when the ignition is switched on for an operation check, and turns off a few seconds later or
when the engine is started. If the light does not turn on or remains turned on, have the vehicle inspected at an
expert repairer, we recommend an Authorised Mazda Repairer.
Wrench Indicator Light
When the ignition is switched ON, the
wrench indicator light turns on and then
turns off after a few seconds.
The wrench indicator light turns on
when the preset maintenance period
arrives. Verify the content and perform
maintenance.
Refer to Maintenance Monitor on page
6-14 .
SKYACTIV-D 1.5
The wrench indicator light turns on under
the following conditions:
The engine oil has deteriorated.
The engine oil level is around the MIN
mark on the dipstick or it is less than the
MIN mark.
*
The engine oil level is around the X
mark on the dipstick or it exceeds the X
mark.
*
Check the engine oil. Refer to Inspecting
Engine Oil Level on page 6-26 .
Replace the engine oil if the wrench
indicator light does not turn off even
though the engine oil level is in the normal
range.
NOTE
Depending on the vehicle use
conditions, the wrench indicator light
may turn on for reasons other than
the preset maintenance period.
Whenever the engine oil is replaced,
a reset of the vehicle engine control
unit is necessary.
Your Authorised Mazda Repairer
will be able to reset the engine
control unit or see page 6-25 for
the Vehicle engine control unit reset
procedure.
Page 183 of 723
4–43
When Driving
Instrument Cluster and Display
Low Engine Coolant Temperature
Indicator Light (Blue)
The light illuminates continuously when
the engine coolant temperature is low and
turns off after the engine is warm.
If the low engine coolant temperature
indicator light remains illuminated after
the engine has been suf ¿ ciently warmed
up, the temperature sensor could have a
malfunction. Consult an expert repairer,
we recommend an Authorised Mazda
Repairer.
Glow Indicator Light
(SKYACTIV-D 1.5)
This light may illuminate when the
ignition is switched ON.
It turns off when the glow plugs are warm.
If the ignition is left switched ON for a
long period of time without the engine
running after the glow plugs are warmed
up, the glow plugs may warm up again
which will illuminate the glow indicator
light.
