2017 MAZDA MODEL CX-3 change time

6–30
Maintenance and Care
Owner Maintenance
Window and Headlight
Washer Fluid
Inspecting Washer Fluid Level
WARNING
Use only windscreen washer À uid or
plain water in the reservoir:
Using radiator antifreeze as washer
À uid is dangerous. If sprayed on the
windscreen, it will dirty the windscreen,
affect your visibility, and could result in
an accident.
Inspect À uid level in the washer À uid
reservoir; add À uid if necessary.


E

Use plain water if washer À uid is
unavailable.
But use only washer À uid in cold weather
to prevent it from freezing.
NOTE
Front and rear washer À uid is supplied
from the same reservoir.
Body Lubrication
All moving points of the body, such as
door and bonnet hinges and locks, should
be lubricated each time the engine oil is
changed. Use a nonfreezing lubricant on
locks during cold weather.

Make sure the bonnet's secondary latch
keeps the bonnet from opening when the
primary latch is released.

7–67
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
*Some models.
Electronic Steering Lock Warning
Beep
The warning beep operates if the steering
wheel is not unlocked after the push button
start is pressed. (page 4-4 )
i-stop Warning Beep *
















 If the driver's door is opened while
engine idling is stopped, the warning
sound operates to notify the driver that
engine idling is stopped. It stops when
the driver's door is closed.
 


 The warning sound operates if the
following operations are performed
while the engine idling is stopped. In
such cases, the engine does not restart
automatically to ensure safety. Start the
engine using the normal method.
 

 
 (European model) 
 The driver's seat belt is unfastened and
the driver's door is opened.
 

 
 (Except European model) 


 
 (Manual transaxle) 
 With the shift lever in a position other
than neutral, the driver's seat belt is
unfastened and the driver's door is
opened.
 

 
 (Automatic transaxle) 
 With the selector lever in the D or
M (not in second gear ¿ xed mode)
position, the driver's seat belt is
unfastened and the driver's door is
opened.



Vehicle Speed Alarm *
The vehicle speed alarm function is
designed to alarm the driver via a single
beep sound and a warning indication in the
instrument cluster that the previously set
vehicle speed has been exceeded.
You can change the vehicle speed setting
at which the warning is triggered.
Refer to Trip Computer and INFO Switch
on page 4-30 .
120 km/h Warning Beep *
If the vehicle speed exceeds 120 km/h, a
chime sounds for 5 seconds.
Outside Temperature Warning
Beep *
Warns the driver of the possibility of icy
roads when the outside temperature is low.
If the outside temperature is lower than
about 4 °C (39 °F) , a beep sound is heard
once and the outside temperature display
À ashes for about ten seconds.
Refer to Outside Temperature Display on
page 4-29 .
Ty r e I nÀ ation Pressure Warning
Beep *
The warning beep sound will be heard
for about 3 seconds when there is any
abnormality in tyre inÀ ation pressures
(page 4-198 ).
Power Steering Warning Buzzer
If the power steering system has
a malfunction, the power steering
malfunction light turns on or À ashes and
the buzzer operates at the same time.
Refer to Warning Lights on page 4-36 .

7–68
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
*Some models.
Blind Spot Monitoring (BSM)
System Warning Beep *
D r i v i n g f o r w a r d
The warning beep operates when the
direction indicator lever is operated to
the side where the Blind Spot Monitoring
(BSM) warning light is illuminated.
NOTE
A personalised function is available
to change the Blind Spot Monitoring
(BSM) warning beep sound volume.
Refer to Personalisation Features on
page 9-13 .
Reversing
If a moving object such as a vehicle or
two-wheeled vehicle approaches on the
left or right from behind your vehicle, the
Blind Spot Monitoring (BSM) warning
sound is activated.
Lane Departure Warning Sound *
While the system is operating, if the
system determines that the vehicle may
depart from the lane, it sounds a warning
sound.
NOTE
  The volume of the LDWS warning
sound can be changed.
 Refer to Personalisation Features on
page 9-13 .
  The type of the LDWS warning
sound can be changed.
 Refer to Personalisation Features on
page 9-13 .
Excessive Speed Warning *
If the vehicle speed exceeds the speed
limit sign displayed on the active driving
display, the warning sound is activated
and the area around the speed limit sign
displayed on the active driving display
À ashes 3 times in amber, and if the vehicle
speed continues to exceed the displayed
speed limit sign, the indication stops
À ashing and remains on.
Mazda Radar Cruise Control
(MRCC) System Warnings *
The Mazda Radar Cruise Control (MRCC)
system warnings notify the driver of
system malfunctions and cautions on use
when required.
Check based on the beep sound.

Cautions What to check
The beep sounds 1 time
while the Mazda Radar
Cruise Control (MRCC)
is operating The vehicle speed is
slower than 25 km/h
(16 mph) and the Mazda
Radar Cruise Control
(MRCC) system has
been cancelled.
(European models)
The beep sounds 5 times
while driving
(Except European
models)
The beep continues to
sound while the vehicle
is being driven. The distance between
your vehicle and the
vehicle ahead is too
close. Verify the safety
of the surrounding area
and reduce vehicle
speed.
When the Mazda Radar
Cruise Control (MRCC)
is operating, the beep
sounds and the Mazda
Radar Cruise Control
(MRCC) warning
light (amber) in the
instrument cluster turns
on. A malfunction in the
system may be indicated.
Have your vehicle
inspected at an expert
repairer, we recommend
an Authorised Mazda
Repairer.

9–15
Speci¿ cations
Personalisation Features
Item Feature Factory
Setting Available
Settings Settings
Change
Method


Vehicle
Door locks (page
3-17 ) Operation condition of auto lock/unlock
function Lock:
Driving,
Unlock: IGN
Off Off/
Lock When
Driving/
Lock:
Driving,
Unlock: IGN
Off/
Lock When
Shifting Out
Of P/
Lock: Shift
From P,
Unlock: In P/
Lock:
Driving,
Unlock: In P A D


Keyless entry
system (page
3-3 ) Time for locking door automatically 30 seconds 90 seconds/
60 seconds/
30 seconds A —


Advanced keyless
entry system (page
3-9 ) Time for locking door automatically 30 seconds 90 seconds/
60 seconds/
30 seconds A —


Auto-lock function operation/non-operational Off On/Off A —


Beep volume when locking/
unlocking
European models Off High/
Medium/
L o w /
O f f A E,
F

Except European
models Medium
Illuminated entry
system (page
5-160 ) Time until interior lights turn off after closing
door 15 seconds 60 seconds/
30 seconds/
15 seconds/
7.5 seconds A —


Time until interior lights turn off automatically
when any door is not closed completely 30 minutes 60 minutes/
30 minutes/
10 minutes A —


Auto-wiper control
(page 4-70 ) Operational/non-operational On On/Off
*5 A —

Running lights
(page 4-66 ) Operational/non-operational On On/Off — —


Auto-light control
(page 4-59 ) Timing by which lights turn on Medium Light/
Medium
Light/
Medium/
Medium
Dark/
Dark A —

9–16
Speci¿ cations
Personalisation Features
Item Feature Factory
Setting Available
Settings Settings
Change
Method


High Beam Control
System (HBC)
(page 4-105 ) Operational/non-operational
*1 O n O n / O f f A —

Adaptive LED
Headlights (ALH)
(page 4-108 ) Operational/non-operational
*1 O n O n / O f f A —

Lights-on reminder
(page 7-64 ) Warning beep volume High or Low
or Off High/Low/
Off A —


Coming home light
(page 4-65 ) Time until headlights turn off 30 seconds 120 seconds/
90 seconds/
60 seconds/
30 seconds/
O f f A —


Leaving home light
(page 4-65 ) Operational/non-operational On or Off On/Off A —


Direction indicator
(page 4-69 ) Beep volume High High/Low A —


Three-À ash turn
signal (page 4-70 ) Operational/non-operational On or Off On/Off A —


Rear window
defogger (page
4-75 ) The operation time for the rear window
defogger can be changed. 15 minutes 15 minutes/
Continuous
*6 — —

System
Language Language indicated in display English Depends on
market
*7 A —

Temperature Temperature unit indicated in display °C °F/°C A —


Distance Distance unit indicated in display mi or km mi/km A —


Fuel Economy Monitor (page 4-91 )
Ending display Display/non-display Off On/Off B —


Fuel economy
resetting procedure Linkage/non-linkage with fuel economy reset
and trip meter reset Off On/Off B —

9–17
Speci¿ cations
Personalisation Features
Item Feature Factory
Setting Available
Settings Settings
Change
Method


Active Driving Display (page 4-33 )
Display Setting can be changed so that the Active
Driving Display is not displayed. On On/Off C —


The display height (up/down position) can be
changed. 0 13 steps up/
down from
initial setting
(total: 27
steps) C —


The method for adjusting the display
brightness (automatically/manually) can be
changed. AUTO AUTO/
MANUAL C —


The standard brightness while automatic
adjustment is selected can be changed using
the brightness adjustment. 0 2 steps up/
down from
initial setting
(total: 5
steps) C —


The standard brightness while manual
adjustment is selected can be changed using
the brightness adjustment. 0 20 steps up/
down from
initial setting
(total: 41
steps) C —


Navigation guidance The display information can be changed. Adaptive
Lane/Street/
Turn Adaptive
Lane/Street/
Turn
Lane
Guidance &
Turn by Turn
Street Name
& Turn by
Turn
OFF C —


*1 Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda recommends
that these systems remain On.
*2 For vehicles with an audio system other than the on-screen function type, the warning sound cannot be changed.
The warning sound is only a beep.
*3 Only the volume of the warning beep during Blind Spot Monitoring (BSM) operation can be changed. The
volume of the warning beep during Rear Cross Traf¿ c Alert (RCTA) operation cannot be changed.
*4 This system functions only when the navigation system is functioning.
*5 If the auto-wiper control is set to Off, the wiper lever
position is set to intermittent operation.
*6 The operation may stop in 15 minutes due to the effect of the outside temperature even if the operation time of
the rear window defogger has been changed to Continuous.
*7 Available only in display from the centre display.