2017 MAZDA MODEL 2 change time

7–53
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
*Some models.
Outside Temperature Warning
Beep
Warns the driver of the possibility of icy
roads when the outside temperature is low.
If the outside temperature is lower than
about 4 °C (39 °F) , a beep sound is heard
once and the outside temperature display
À ashes for about ten seconds.
Refer to Outside Temperature Display on
page 4-31 .
Over Rev. Buzzer *
The buzzer sounds to notify the driver if
the engine speed is about to exceed the
permissible engine speed.
CAUTION
Operate the accelerator and shift gears
according to the driving conditions so
that the buzzer does not sound. If the
engine speed exceeds the permissible
engine speed, the engine could be
damaged.
Ty r e I nÀ ation Pressure Warning
Beep *
The warning beep sound will be heard
for about 3 seconds when there is any
abnormality in tyre inÀ ation pressures
(page 4-190 ).
Power Steering Warning Buzzer
If the power steering system has
a malfunction, the power steering
malfunction light turns on or À ashes and
the buzzer operates at the same time.
Refer to Warning Lights on page 4-38 .
Blind Spot Monitoring (BSM)
System Warning Beep *
D r i v i n g f o r w a r d
The warning beep operates when the
direction indicator lever is operated to
the side where the Blind Spot Monitoring
(BSM) warning light is illuminated.
NOTE
A personalised function is available
to change the Blind Spot Monitoring
(BSM) warning beep sound volume.
Refer to Personalisation Features on
page 9-13 .
Reversing
If a moving object such as a vehicle or
two-wheeled vehicle approaches on the
left or right from behind your vehicle, the
Blind Spot Monitoring (BSM) warning
sound is activated.
Lane Departure Warning Sound *
While the system is operating, if the
system determines that the vehicle may
depart from the lane, it sounds a warning
sound.
NOTE
  The volume of the LDWS warning
sound can be changed.
 Refer to Personalisation Features on
page 9-13 .
  The type of the LDWS warning
sound can be changed.
 Refer to Personalisation Features on
page 9-13 .

9–15
Speci¿ cations
Personalisation Features
Item Feature Factory Setting Available
Settings Settings Change
Method


Vehicle
Door locks
(page 3-17 ) Operation condition of auto
lock/unlock function Lock: Driving,
Unlock: IGN Off Off/
Lock When
Driving/
Lock: Driving,
Unlock: IGN
Off/
Lock When
Shifting Out
Of P/
Lock: Shift From
P, Unlock: In P/
Lock: Driving,
Unlock: In P A D


Keyless entry system
(page 3-3 ) Time for locking door
automatically 30 seconds 90 seconds/
60 seconds/
30 seconds A —


Advanced keyless
entry system
(page 3-9 ) Time for locking door
automatically 30 seconds 90 seconds/
60 seconds/
30 seconds A —


Auto-lock function operation/
non-operational Off On/Off A —


Beep volume
when locking/
unlocking European
models Off
High/
Medium/
L o w /
O f f A E,
F

Except
European
models Medium
Illuminated entry
system
(page 5-158 ) Time until interior lights turn
off after closing door 15 seconds 60 seconds/
30 seconds/
15 seconds/
7.5 seconds A —


Time until interior lights turn
off automatically when any
door is not closed completely 30 minutes 60 minutes/
30 minutes/
10 minutes A —


Auto-wiper control
(page 4-72 ) Operational/non-operational On On/Off
*4 A —

Running lights
(page 4-68 ) Operational/non-operational On On/Off — —


Auto-light control
(page 4-61 ) Timing by which lights turn
on Medium Light/
Medium Light/
Medium/
Medium Dark/
Dark A —


High Beam Control
System (HBC)
(page 4-105 ) Operational/non-operational
*1 O n O n / O f f A —

9–16
Speci¿ cations
Personalisation Features
Item Feature Factory Setting Available
Settings Settings Change
Method


Adaptive LED
Headlights (ALH)
(page 4-108 ) Operational/non-operational
*1 O n O n / O f f A —

Lights-on reminder
(page 7-50 ) Warning beep volume High or Low
or Off High/Low/Off A —


Coming home light
(page 4-67 ) Time until headlights turn off 30 seconds 120 seconds/
90 seconds/
60 seconds/
30 seconds/
O f f A —


Leaving home light
(page 4-67 ) Operational/non-operational On or Off On/Off A —


Direction indicator
(page 4-71 ) Beep volume High High/Low A —


Three-À ash turn signal
(page 4-72 ) Operational/non-operational On or Off On/Off A —


Rear window defogger
(page 4-78 ) The operation time for the
rear window defogger can be
changed. 15 minutes 15 minutes/
Continuous
*5 — —

System
Language Language indicated in display English Depends on
market
*6 A —

Temperature Temperature unit indicated in
display °C °F/°C A —


Distance Distance unit indicated in
display mi or km mi/km A —


Fuel Economy Monitor (page 4-93 )
Ending display Display/non-display Off On/Off B —


Fuel economy
resetting procedure Linkage/non-linkage with
fuel economy reset and trip
meter reset Off On/Off B —

9–17
Speci¿ cations
Personalisation Features
Item Feature Factory Setting Available
Settings Settings Change
Method


Active Driving Display (page 4-35 )
Display Setting can be changed so that
the Active Driving Display is
not displayed. On On/Off C —


The display height (up/down
position) can be changed. 0 13 steps up/
down from initial
setting
(total: 27 steps) C —


The method for adjusting
the display brightness
(automatically/manually) can
be changed. AUTO AUTO/
MANUAL C —


The standard brightness
while automatic adjustment is
selected can be changed using
the brightness adjustment. 0 2 steps up/down
from initial
setting
(total: 5 steps) C —


The standard brightness while
manual adjustment is selected
can be changed using the
brightness adjustment. 0 20 steps up/
down from initial
setting
(total: 41 steps) C —


Navigation guidance The display information can
be changed. Adaptive Lane/
Street/Turn At Manoeuvre/
Lane Guidance
& Turn by Turn/
Street Name &
Turn by Turn/
OFF C —


*1 Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda recommends
that these systems remain On.
*2 For vehicles with an audio system other than the on-screen function type, the warning sound cannot be changed.
The warning sound is only a beep.
*3 Only the volume of the warning beep during Blind Spot Monitoring (BSM) operation can be changed. The
volume of the warning beep during Rear Cross Traf¿ c Alert (RCTA) operation cannot be changed.
*4 If the auto-wiper control is set to Off, the wiper lever
position is set to intermittent operation.
*5 The operation may stop in 15 minutes due to the effect of the outside temperature even if the operation time of
the rear window defogger has been changed to Continuous.
*6 Available only in display from the centre display.