2017 LEXUS LS600H length

187
3
Operation of each component
LS600h/LS600hL_EE(OM50G20E)
3-3. Adjusting the seats
Seat position adjustment switch
The height of the driver’s head restraint is automatically adjusted simultaneously
with the seat position adjustment operation.
Seatback angle adjustment switch
Head restraint height adjustment switch ( P. 214)
Seat cushion (front) angle adjustment switch
Vertical height adjustment switch
Lumbar/pelvic support adjustment switch
Driver’s seat: firmness, vertical, backward and forward positioning
Front passenger’s seat: firmness, backward and forward positioning (if equipped)
Seat cushion length adjustment switch
Ottoman angle adjustment switch (if equipped)
If forward adjustment is performed while the ottoman is raised, the ottoman will
move downward.
Front seats
Adjustment procedure
Passenger’s seat Driver’s seat
1
2
3
4
5
6
7
8

1913-3. Adjusting the seats
3
Operation of each component
LS600h/LS600hL_EE(OM50G20E)
■Operating the foldable head restraint (vehicles with relaxation seat)
●If the seatback angle is adjusted using the switches located on the side of the front
passenger’s seat or center console when the power switch is in ON mode, the
head restraint will operate as follows:
• When tilting the seatback forward:
After the seatback movement ends, the head restraint starts to rise and fold. A
signal beeps once operation is complete. If the switch is released during the
operation, the head restraint will return to the neutral position.
• When tilting the seatback backward:
If the head restraint is folded, it will return to the neutral position.
●In the following situations, the head restraint will not operate even when the seat-
back angle adjustment switch is operated:
•The power switch is off.
• The weight of an occupant or heavy object, etc. is detected on the front passen-
ger’s seat.
• The front passenger’s seat belt is fastened.
• The front passenger’s door is open.
■Operating the front passenger’s seat from the rear seat (vehicles with relaxation
seat)
The front passenger’s seat can be operated when the power switch is in ON mode.
However, in the following situations, the front passenger’s seat does not move even
when the switch is operated:
●The weight of an occupant or heavy load etc. is detected on the front passenger’s
seat.
●The front passenger’s seat belt is fastened.
●The front passenger’s door is open. (The front seat will not move forward.)
■Seat cushion automatic length adjustment (driver’s seat)
If the front of the cushion gets too close to the area around the instrument panel
when the seat position is being adjusted, the seat cushion will automatically retract.
■Seat operation automatic stop function (vehicles with relaxation seat)
If a front seat is likely to come into contact with the retractable table (4-seat models)
or the ottoman during seat operation or activation of the power easy access system,
a buzzer will sound and seat slide operation will be stopped partway.
(A warning message will be shown on the multi-information display.)

620
LS600h/LS600hL_EE(OM50G20E)
8-1. Specifications
Dimensions
*1: Unladen vehicles
*2: Vehicles without paddle shift switches
*3: Vehicles with paddle shift switches
Weights
*1: With relaxation seat
*2: Without relaxation seat
*3: 5-seat models with relaxation seat
*4: Except 5-seat models with relaxation seat
Maintenance data (fuel, oil level, etc.)
Dimensions and weights
Overall lengthLS600hL 5210 mm (205.1 in.)
LS600h 5090 mm (200.4 in.)
Overall width 1875 mm (73.8 in.)
Overall height*11480 mm (58.3 in.)*2
1470 mm (57.9 in.)*3
WheelbaseLS600hL 3090 mm (121.7 in.)
LS600h 2970 mm (116.9 in.)
TreadFront 1610 mm (63.4 in.)
Rear 1610 mm (63.4 in.)
Gross vehicle mass
LS600hL
(5-seat models)
2815 kg (6206 lb.)*1
2785 kg (6140 lb.)*2
LS600hL
(4-seat models) 2750 kg (6062 lb.)
LS600h 2765 kg (6095 lb.)
Maximum permis-
sible axle capacity
Front 1395 kg (3075 lb.)
Rear 1465 kg (3230 lb.)*3
1460 kg (3219 lb.)*4