Page 634 of 692

6348-2. Steps to take in an emergency
IS300h_EE(OM53D89E)
WARNING
■Avoiding 12-volt battery fires or explosions
Observe the following precautions to prevent accidentally igniting the flammable gas
that may be emitted from the 12-volt battery:
●Make sure each jumper cable is connected to the correct terminal and that it is not unintentionally in contact with any other than the intended terminal.
●Do not allow the other end of the jumper cable connected to the “+” terminal to come
into contact with any other parts or metal surfaces in the area, such as brackets or unpainted metal.
●Do not allow the + and - clamps of the jump er cables to come into contact with each
other.
●Do not smoke, use matches, cigarette light ers or allow open flame near the 12-volt
battery.
■12-volt battery precautions
The 12-volt battery contains poisonous and co rrosive acidic electrolyte, while related
parts contain lead and lead compounds. Ob serve the following precautions when han-
dling the 12-volt battery:
●When working with the 12-volt battery, always wear safety glasses and take care not
to allow any 12-volt battery fluids (acid) to come into contact with skin, clothing or the
vehicle body.
●Do not lean over the 12-volt battery.
●In the event that 12-volt battery fluid comes into contact with the skin or eyes, immedi-
ately wash the affected area with water and seek medical attention. Place a wet sponge or cloth over the affected area until medical attention can be
received.
●Always wash your hands after handling the 12-volt battery support, terminals, and other battery-related parts.
●Do not allow children near the 12-volt battery.
■After recharging the 12-volt battery
Have the 12-volt battery inspected at any authorized Lexus retailer or Lexus autho-
rized repairer, or any reliable repairer as soon as possible.
If the 12-volt battery is deteriorating, co ntinued use may cause the 12-volt battery to emit a malodorous gas, which may be de trimental to the health of passengers.
■When replacing the 12-volt battery
P. 524
Page 639 of 692

6398-2. Steps to take in an emergency
8
When trouble arises
IS300h_EE(OM53D89E)
Start the hybrid system and check if “Hybrid System Overheated Reduced
Output Power” is shown on the multi-information display.
If the message does not disappear:
Stop the hybrid system and contact an y authorized Lexus retailer or Lexus
authorized repairer, or any reliable repairer.
If the message is not displayed:
Have the vehicle inspected at the nearest authorized Lexus retailer or
Lexus authorized repairer, or any reliable repairer.
WARNING
■When inspecting under the hood of your vehicle
Observe the following precautions. Failure to do so may result in serious injury such as burns.
●If steam is seen coming from under the hood, do not open the hood until the steam
has subsided. The engine compartment may be very hot.
●After the hybrid system has been turned off, check that the “READY” indicator is off.
When the hybrid system operating, the gasoline engine may automatically start, or
the cooling fan may suddenly operate even if the gasoline engine stops. Do not touch or approach rotating parts such as the be lt and fan, which may lead to fingers or
clothing (especially a tie, a scarf or a mu ffler) getting caught, resulting in serious
injury.
6
●Do not loosen the c oolant reservoir caps or
water filler cap while th e hybrid system and
radiator are hot. High temperature steam or coolant could
spray out.
Page 642 of 692
6428-2. Steps to take in an emergency
IS300h_EE(OM53D89E)
WARNING
■When attempting to free a stuck vehicle
If you choose to push the vehicle back and forth to free it, make sure the surrounding
area is clear to avoid striking other vehicles, objects or people. The vehicle may also
lunge forward or lunge back suddenly as it becomes free. Use extreme caution.
■When shifting the shift lever
Be careful not to shift the shift lever with the accelerator pedal depressed.
This may lead to unexpected rapid acceleration of the vehicle that may cause an acci- dent resulting in death or serious injury.
NOTICE
■To avoid damaging the transmission and other components
●Avoid spinning the rear wheels and depre ssing the accelerator pedal more than nec-
essary.
●If the vehicle remains stuck even after th ese procedures are performed, the vehicle may require towing to be freed.
Page 659 of 692
659
9
9-2. Customization
Vehicle specifications
IS300h_EE(OM53D89E)
■Door lock ( P. 144, 151, 628)
■Smart entry & start system and wireless remote control (P. 144, 151)
FunctionDefault settingCustomized setting
Unlocking using a mechanical key
All doors
unlocked in one step
Driver’s door unlocked in one step,
all doors unlocked in
two steps
—O
Speed-detecting automatic door lock functionOnOffOO
Shifting gears to position other
than P locks all doorsOffOnOO
Shifting gears to P unlocks all
doorsOffOnOO
Opening driver’s door unlocks all doorsOnOffOO
Locking/unlocking of the trunk
when all doors are locked/
unlocked
OnOff—O
12
FunctionDefault settingCustomized setting
Operation signal (Emergency flashers)OnOffOO
Time elapsed before automatic
door lock function is activated if
door is not opened after being unlocked
30 seconds
60 seconds
—O120 seconds
Open door warning buzzerOnOff—O
Welcome light illumination con-
trolOnOff—O
12
Page 665 of 692

665
9
9-2. Customization
Vehicle specifications
IS300h_EE(OM53D89E)
■Vehicle customization
●When the speed-detecting automatic door lock and shift-linked automatic door lock
are both on, the door lock operates as follows.
• When shifting the shift lever to any position other than P, all the doors will be locked.
• If the vehicle is started with all doors locked, the speed-detecting automatic door
lock will not operate. • If the vehicle is started with any door unlocked, the speed-detecting automatic door
lock will operate.
●When the smart entry & start system is off, the entry unlock function cannot be custom-
ized.
●When the doors remain closed after unlocking the doors and the timer activated auto- matic door lock function activates, signals will be generated in accordance with the
operation buzzer volume and operational signal (Emergency flashers) function set-
tings.
●Some settings can be changed using a switch or the audio system screen. If a setting is
changed using a switch , the changed setting will not be reflected on the audio system
screen until the power switch is turned off and then to ON mode.
WARNING
■During customization
As the hybrid system needs to be operating during customization, ensure that the vehi-
cle is parked in a place with adequate ventil ation. In a closed area such as a garage, exhaust gases including harmful carbon mo noxide (CO) may collect and enter the
vehicle. This may lead to deat h or a serious health hazard.
NOTICE
■During customization
To prevent 12-volt battery discharge, ensure that the hybrid system is operating while
customizing features.
Page 666 of 692
666
IS300h_EE(OM53D89E)
9-3. Initialization
Items to initialize
The following item must be initialized for normal system operation after such
cases as the 12-volt battery being re connected, or maintenance being per-
formed on the vehicle:
ItemWhen to initializeReference
Engine oil maintenance dataAfter changing the engine oilP. 518
Tire pressure warning system
• When rotating the tires • When changing the tire inflation
pressure by changing traveling
speed or load weight, etc.
P. 527
Page 670 of 692

670What to do if... (Troubleshooting)
IS300h_EE(OM53D89E)
●Is the window lock switch pressed?
The power window except for the one at the driver’s seat cannot be operated
if the window lock switch is pressed. ( P. 193)
●The auto power off function will be operated if the vehicle is left in ACCES-
SORY or ON mode (the hybrid system is not operating) for a period of time.
( P. 221)
●The seat belt reminder light is flashing
Are the driver and the front passenger wearing the seat belts? ( P. 577)
●The parking brake indicator is on
Is the parking brake released? ( P. 235)
Depending on the situation, other type s of warning buzzer may also sound.
( P. 575, 581)
●Did anyone inside the vehicle open a door or anything move inside the vehicle
during setting the alarm?
The sensor detects them and the alarm sounds. ( P. 92)
Do one of the following to deactivate or stop the alarm:
• Unlock the doors or open the trunk using the entry function or wireless
remote control.
• Start the hybrid system.
The windows do not open or close by operating the power window
switches
The power switch is turned off automatically
A warning buzzer sounds during driving
An alarm is activated and the horn sounds (if equipped)
Page 671 of 692
671What to do if... (Troubleshooting)
IS300h_EE(OM53D89E)
●Is the message displayed on the multi-information display?
Check the message on the mu lti-information display. (P. 581)
●When a warning light turns on or a warning message is displayed, refer to
P. 575, 581.
●Vehicles with an emergency tire puncture repair kit
Stop the vehicle in a safe place and repa ir the flat tire temporarily with the
emergency tire puncture repair kit. ( P. 610)
●Vehicles with run-flat tires
Slow down and drive with extra caution . Take your vehicle to the nearest
authorized Lexus retailer or Lexus au thorized repairer, or any reliable
repairer or authorized tire dealer to have the flat tire replaced.
( P. 625)
●Try the procedure for when the vehicle becomes stuck in mud, dirt, or snow.
( P. 641)
A warning buzzer sounds when leaving the vehicle
A warning light turns on or a warning message is displayed
When a problem has occurred
If you have a flat tire
The vehicle becomes stuck