39
GX460_QG_OM60P00U_(U)
Automatic High Beam (if equipped)
■Activating the Automatic High Beam system
Turn the headlight switch to “AUTO”
position.
Push the lever away from you.
The Automatic High Beam indicator
will come on when the headlights are
turned on automatically to indicate that
the system is active.
The Automatic High Beam uses an in-vehicle camera sensor to assess the brightness of
streetlights, the lights of oncoming and preceding vehicles, etc., and automatically turns
high beam on or off as necessary.
1
2
When all of the following conditions are fulfilled, high beam will be automatically turned on
(after approximately 1 second): • Vehicle speed is above approximately 20 mph (32 km/h).
• The area ahead of the vehicle is dark.
• There are no oncoming or preceding vehicles with headlights or tail lights turned on.
GX460_QG_OM60P00U_(U).book Page 39 Friday, June 3, 2016 2:27 PM
98
What to do if ...
GX460_QG_OM60P00U_(U)
Follow the correction procedures.
Open door warning lightMaster warning light
Low fuel level warning light
(Illuminates without
blinking)Tire pressure warning light*3
Seat belt reminder light
See the “OWNER’S MANUAL”.
Turn signal indicator“SET” indicator
Headlight indicator (U.S.A.)Dynamic radar cruise control
indicator
*1
Tail light indicator (Canada)“LDA” (Lane Departure Alert)
indicator
*1
Headlight high beam
indicator
(Flashes)Slip indicator
Automatic High Beam
indicator
*1VSC OFF indicator
Fog light indicator*1Multi-terrain
Select indicator
*1
Eco Driving Indicator LightCrawl Control indicator*1
Cruise control indicatorDownhill assist control system
indicator
*1
For further information, refer to the “OWNER’S MANUAL”.
GX460_QG_OM60P00U_(U).book Page 98 Thursday, June 16, 2016 1:43 PM
