2017 KIA SPORTAGE phone
[x] Cancel search: phonePage 34 of 52
31
Call History
Press the 0033002B003200310028 key
and then
00260044004F004F0003002B004C0056005700520055005C .
Name Description
All Lists the all call
history.
DialedLists the calls that
you made.
Received Lists the calls that
you have received.
MissedLists the calls you
missed.
Call
History Displays all of your
call history. Select
from the list to dial
the number.
Information
Displays the
details of your call
history
information.
DownloadDownloads the call
history information
from your mobile
phone.
CallDials the selected
number in your
Call History
Information.
Contacts
Info Goes to
the Contact
Information screen
if the number has
been stored.
, @ 2 - @ 6 7 0 < 6 4 " @ & 6 > " 7 @ 2 3 ( J O E E
0 < 6 4 " @ & 6 > " 7 @ 2 3 ( J O E E ß
y
Page 35 of 52
32
Favorites
Press the 0033002B003200310028 key
and then
00290044005900520055004C005700480056 .
Name Description
Favorites Lists the phone
numbers saved as
Favorites. Select
from the list to dial
the number.
Add New
Adds a new number
to Favorites.
Delete
Items Deletes numbers
that you select from
Favorites.
Delete All
Deletes all of the
numbers from
Favorites.
Contacts
Press the 0033002B003200310028 key
and then
00260052005100570044004600570056 .
Name Description
Contacts
List The list of
Contacts. Select
from the list to dial
the number.
Information
Displays contact
information.
Download Downloads con-
tacts from your
mobile phone.
Search by
Name Searches Contacts
for the name that
you enter.
Search by
Number Searches Contacts
for the number that
you enter.
Add to
Favorites Adds a phone
number to
Favorites.
0025004F005800480057005200520057004B
, @ 2 - @ 6 7 0 < 6 4 " @ & 6 > " 7 @ 2 3 ( J O E E
0 < 6 4 " @ & 6 > " 7 @ 2 3 ( J O E E ß
y
Page 36 of 52
33
0033005500480046004400580057004C00520051005600030035004800540058004C005500480047
0049005200550003003600580046004600480056005600490058004F00030039
0035004800460052004A0051004C0057004C00520051
1. Voice recognition supports only
the commands that are displayed
on the screen and written in the
User’s Guide.
2. To ensure the correct recognition
and execution of your command,
say your command when you hear
the beep after a voice prompt.
3. Voice recognition automatically
ends if: 1) A call is incoming or outgoing
2) A media (USB or iPod, etc.) is
connected or disconnected
3) The rear view camera is operated
4) The car engine starts or stops
5) A system key, such as
003500240027002C0032
key or 003000280027002C0024 key is selected
4.
The microphone used for the voice
recognition system is located in
the headliner directly above the
driver’s head. To make your com-
mands better understood, keep
your body straight in the driver’s
seat when speaking the com-
mand.
5. Speaking naturally and clearly will
ensure better recognition of your
voice commands.
6. In the following cases voice rec-
ognition will be affected by ambi-
ent noise.
1) The sound of the wind if any
window or the sun roof is open.
2) High speed blower from the
air vents. Set climate control to
blow lower than level 3.
3) Vibrations from passing through
a tunnel.
4) Vibrations from driving on an
uneven road.
5) Storms and heavy rain.
0039
, @ 2 - @ 6 7 0 < 6 4 " @ & 6 > " 7 @ 2 3 ( J O E E 0 < 6 4 " @ & 6 > " 7 @ 2 3 ( J O E E ß
y
Page 40 of 52
37
0039
Types of Commands
Voice recognition commands are classified as “Global Commands” and “Local
Commands.”
1. Global Commands (
●): Commands that can be used immediately after acti-
vating voice recognition.
2. Local Commands (
○): Commands that can be used when a multimedia or
Bluetooth function is running, or displayed on the screen, after activating
voice recognition.
Call Commands
* Check the following before using call commands:
1. Voice commands related to phone calls can be used after connecting a Bluetooth device.
2. To call a person, for example “Call
loading contacts, see “Part 3. Using Bluetooth > Chapter 3. Bluetooth Phone
> 3.10 Contacts”.
3. After downloading the Bluetooth contacts, it will take some time to convert the Contacts into voice data during which time you cannot make a call by
name yet. The time it takes to convert voice data may vary depending on
the number of Contacts downloaded on the phone.
, @ 2 - @ 6 7 0 < 6 4 " @ & 6 > " 7 @ 2 3 ( J O E E 0 < 6 4 " @ & 6 > " 7 @ 2 3 ( J O E E ß
y
Page 41 of 52
38
0039
CommandOperation
●CallDisplays downloaded Contacts, after this you can make
a call by saying the name.
●Call
loaded Contacts.
●Call
MobileYou can call a person
that is saved as “Mobile” in the downloaded Contacts.
e.g.) Call “John Smith” on Mobile
●Call
OfficeYou can call a person
that is saved as “Office” in the downloaded Contacts.
e.g.) Call “John Smith” in Office
●Call
HomeYou can call a person
that is saved as “Home” in the downloaded Contacts.
e.g.) Call “John Smith” at Home
●Call
OtherYou can call a person
that is saved as “Other” than “Mobile, Home, or Office”
in the downloaded Contacts.
e.g.) Call “John Smith” on Other
●Dial Number
Displays a screen where you can say a phone number
to dial.
●Dial
e.g.) Dial 111 555 1234
●Redial
Directly calls at the number that you last dialed.
●Call HistoryDisplays your Call History, where you can say the list
number to make a call.
, @ 2 - @ 6 7 0 < 6 4 " @ & 6 > " 7 @ 2 3 ( J O E E
0 < 6 4 " @ & 6 > " 7 @ 2 3 ( J O E E ß
y
Page 43 of 52
40
0039
Media Commands
* Check the following before you use media commands.
1.
If no media is connected or if no playable files exist at the time when you use these
commands, a voice message will tell you that this is not available.
2. If you say the name of the media that is currently playing again, then that media will continue playing.
e.g.) Saying “USB” while USB content is playing.
Command Operation
●MusicContinues the last media you played.
●iPodPlays the iPod currently connected. This will work the
same when an iPhone is connected. If a USB is con-
nected, then it will be played instead of the iPod.
●USBPlays the music on the USB currently connected.
If an iPod is connected, then the iPod will be played
instead of the USB.
●Bluetooth AudioPlays the music on the Bluetooth phone currently connected.
This may not be supported depending on the Bluetooth
connection status.
●AUX
Plays external devices that are currently connected.
●My Music Plays My Music files stored in the system.
●Pandora Radio Plays Pandora Radio that is currently connected.
1. USB Music/iPod/My Music Command
Command Operation
○PlayPlays a selected file.
Maintains the current settings during playback.
○PausePauses a file that is playing.
Maintains current settings while paused during playback.
○ShufflePlays tracks or files randomly.
Maintains current settings during shuffled playback.
○Shuffle OffCancels Shuffle and plays tracks sequentially.
Maintains current settings during sequential playback.
○RepeatPlays the current track or file repeatedly.
Maintains the current settings during repeat playback.
○Repeat OffCancels Repeat and plays multiple tracks or files.
Maintains current settings during multiple track playback.
, @ 2 - @ 6 7 0 < 6 4 " @ & 6 > " 7 @ 2 3 ( J O E E
0 < 6 4 " @ & 6 > " 7 @ 2 3 ( J O E E ß
y
Page 46 of 52
43
0036004C0055004C00030028005C0048005600030029005500480048
How to start Siri
If you want to use Siri, you have
to connect your iOS device to
the Multimedia system through
Bluetooth.
(Please check whether your iOS
device supports Siri and turning Siri
On)
Then you can use Siri while pressing
and holding
key on the
steering wheel.
How to use Siri
When you access the Siri screen
while pressing and holding
key on the steering wheel, you can
press
0036005300480044004E button and then you
can speak what you want. Note that
the Multimedia system only supports
“Phone” related functions. Other
functions will be performed in your
iOS device. If you press voice key
quickly, Siri would re-start. If you hold
down voice key, Siri would be termi-
nated and the screen would go back
to the previous screen. Eyes-Free
mode would be activated automati-
cally while you are driving. When
shifting gears into P or putting the
Parking brake on, Eyes-Free mode
would be deactivated automatically.
i Information
Functions and feedbacks from voice
commands via Sir
i are executed in
the iOS device. If the iOS version is
changed, the functions and response
may be different according to the iOS
device and the latest version.
, @ 2 - @ 6 7 0 < 6 4 " @ & 6 > " 7 @ 2 3 ( J O E E 0 < 6 4 " @ & 6 > " 7 @ 2 3 ( J O E E ß
y
Page 47 of 52
44
00290024
About Pairing Mobile Phones
QI cannot pair my mobile phone, What is the cause?
A
Check to see that the mobile phone supports Bluetooth® function. Verify
if Bluetooth on the cell phone is set to OFF. If so, set it to ON. If the cell
phone still can’t be registered, try again after turning Bluetooth off and on,
or delete the device registration on the multimedia system and cell phone
and then register the cell phone again.
Q
What is the difference between pairing a mobile phone and connecting a mobile phone?
A
Pairing occurs through authenticating the head unit and mobile phone. Mobile phones paired to the head unit can be connected and disconnected \
until the paired mobile phone is deleted from the system. Bluetooth
®
Handsfree features, such as making/answering calls or managing
Contacts, are supported only in mobile phones connected with the head
unit.
Q
What is a Passkey?
A
A passkey is the password used to authenticate the connection between the head unit and mobile phone. The passkey only needs to be entered
once when pairing the mobile phone for the first time.
The initial passkey is 0000. You can change it with
00360028003700380033 Ü
0033004B005200510048 Ü
0025004F005800480057005200520057004B00030036005C00560057004800500003002C005100490052 Ü 0033004400560056004E0048005C
menu options.
, @ 2 - @ 6 7 0 < 6 4 " @ & 6 > " 7 @ 2 3 ( J O E E 0 < 6 4 " @ & 6 > " 7 @ 2 3 ( J O E E ß
y