2017 KIA OPTIMA PLUG-IN HYBRID mirror

BEFORE DRIVING
Before entering vehicle
• Be sure that all windows, outsidemirror(s), and outside lights are clean.
• Check the condition of the tires.
• Check under the vehicle for any sign of leaks.
• Be sure there are no obstacles behind you if you intend to back up.
Necessary inspections
Fluid levels, such as engine oil, engine
coolant, brake fluid, and washer fluid should be checked on a regular basis,
with the exact interval depending on
the fluid. Further details are provided in Chapter 9, Maintenance.
WARNING
Driving while distracted can result ina loss of vehicle control, that maylead to an accident, severe personalinjury, and death. The driver’s pri‐mary responsibility is in the safe andlegal operation of a vehicle, and useof any handheld devices, otherequipment, or vehicle systems which
(Continued)
(Continued)
take the driver’s eyes, attention andfocus away from the safe operationof a vehicle or which are not permis‐sible by law should never be usedduring operation of the vehicle.
Before starting
• Close and lock all doors.
• Position the seat so that all controls
are easily reached.
• Adjust the inside and outside rear‐ view mirrors.
• Be sure that all lights work.
• Check all gauges.
• Check the operation of warning lights when the engine start/stop button
switch is turned to the ON position.
• Release the parking brake and make sure the brake warning light goes
out.
For safe operation, be sure you are fa‐ miliar with your vehicle and its equip‐
ment.
WARNING
All passengers must be properly bel‐ted whenever the vehicle is moving.Refer to L

SPEED LIMIT INFORMATION FUNCTION (SLIF) (IF EQUIPPED)
06.
The system displays the information of
speed limit and no passing restriction to the driver in both the instrument
cluster and navigation screen. SLIF de‐
tects traffic signs with camera system attached on the top of the windscreen.
The SLIF also utilizes the navigation in‐
formation to display the speed limit in‐
formation.
WARNING
•Speed Limit Information Functionis only an aid and is not alwaysable to correctly display speed lim‐its and overtaking restrictions.
•The driver always keeps the re‐sponsibility not to exceed themaximum allowed speed.
•Do not place any accessories,stickers or tint the windshield nearthe rearview mirror.
•The system detects traffic signsand displays speed limit informa‐tion by a camera therefore, if traf‐fic signs are hard to detect, thesystem may not work properly.Please refer to L

• Broken LED traffic signs.
• Poor weather like snow, rain, fog.
• Reflected glare around and/or on thetraffic sign.
• There is insufficient illumination of the traffic signs in the night.
• There is bright lights around traffic signs.
• There is dirt, ice or frost on the wind‐ shield in the area of the camera.
• When camera field of view is covered by objects such as a sticker, paper,
leaf fall.
• When driving very close to the vehicle in front of you.
• When navigation system has mal‐ function.
• When bus or trucks attached with a speed sticker are passing you.
• When you are at a certain location not covered by the navigation sys‐
tem.
• When the navigation system is not updated to the latest map version.Driver's attention
The driver must be cautious in the be‐
low situations for the system may not assist the driver and may not work
properly. • Do not stick or attach anything to the windshield in front of the camera as
this may reduce effectiveness or cause one more of the systems de‐
pendent on the camera to stop work‐
ing.
• Keep the windshield in the area be‐ hind the interior rear view mirror
clean.
• Do not place reflective materials, such as white paper or a mirror, on
the instrument panel.
• Do not strike or damage the areas around the camera unit.
• Do not touch the camera lens or re‐ move the screw located on the cam‐era unit.
• The system does not work in all sit‐ uations but is designed merely as a
supplementary aid.
• The system assists the driver and does not replace the human eye. • The driver always bears ultimate re‐
sponsibility for ensuring that the ve‐hicle is driven safely and that applica‐
ble road traffic rules and regulations
are followed.
Driving your vehicle
7-58

Warning indicator
0+'-
0+'-
When the LDWS is not working proper‐
ly, the warning light will illuminate and the warning message will come on for a
few second. After the message disap‐
pears, the master warning light will illu‐ minate.
We recommend that the system be
checked by an authorized Kia dealer
The LDWS does not operate
when:
• The driver turns on the turn signal or the hazard warning flasher to change
lane.
• Driving on the lane line.
NOTICE
To change lanes, operate the turn
signal switch, then change the lane.
The LDWS may not warn you
even if the vehicle leaves the
lane or may warn you even if
the vehicle does not leave the
lane when:
• The lane is not visible due to snow, rain, stain, a puddle or many other
things. • The brightness of the outside
changes suddenly.
• The headlights are off at night or in a tunnel.
• The color of the lane marking from the road is difficult to distinguish.
• Driving on a steep grade or a curve.
• Light reflects from the water on the road.
• The lens or windshield is stained with foreign matter.
• The sensor can not detect the lane because of fog, heavy rain or heavy
snow.
• The surrounding temperature of the inside rear view mirror is high due to
a direct ray of light.
• The lane is very wide or narrow.
• The lane line is damaged or indistinct.
• The shadow is on the lane line by a median strip.
• There is a mark similar to a lane line.
• There is a boundary structure.
• The distance from vehicle ahead is very short or the vehicle ahead hides
the lane line.
• The vehicle shakes heavily.

7-81
7
Driving your vehicle

LANE KEEPING ASSIST SYSTEM (LKAS) (IF EQUIPPED)
05'4
The Lane Keeping Assist System de‐
tects lane markers on the road, and as‐ sists the driver’s steering to help keep
the vehicle between lanes. When the system detects the vehicle
straying from its lane, it alerts the driv‐
er with a visual and audible warning, while applying a slight counter steering
torque, trying to prevent the vehicle
from moving out of its lane.
WARNING
•The steering wheel is not continu‐ously controlled so if the vehiclespeed is very fast when leaving alane the vehicle may not be con‐trolled by the system.
•The operation of the LKAS can beaffected by several factors (in‐cluding environmental conditions).It is the responsibility of the driverto pay attention to the roadwayand to maintain the vehicle in itslane at all times.
•Do not steer the steering wheelsuddenly when the steering wheelis being assisted by the system.
(Continued)
(Continued)
•LKAS prevents the driver frommoving out of the lane uninten‐tionally by assisting the driver'ssteering. However, the drivershould not solely rely on the sys‐tem but always pay attention onthe steering wheel to stay in thelane.
•Always check the road conditionand surroundings and be cautiouswhen the system cancels, doesnot operate or malfunctions.
•Do not place any accessories,stickers or tint the windshield nearthe rearview mirror.
•The system detects lane markersand controls the steering wheel bya camera, therefore, if the lanemarkers are hard to detect, thesystem may not work properly.Please refer to L

(Continued)
•Do not place objects on the dash‐board that reflects light such asmirrors, white paper, etc. The sys‐tem may malfunction if the sun‐light is reflected.
•Loud audio sounds may interferewith the passenger from hearingwarning chimes.
•Always have your hands on thesteering wheel while the LKASsystem is activated. If you contin‐ue to drive with your hands off thesteering wheel after the "Hand on"warning, the system will turn offautomatically.
•If you drive very fast, the vehiclemay stray out of the lane. Alwaysbe cautious when using the sys‐tem.
•When you tow the trailer, makesure that you turn off LKAS func‐tion.
LKAS operation
0+'
To turn ON the LKAS, press the switch,
after turning ON the ignition switch. The indicator illuminates on the instru‐
ment cluster. To turn OFF the LKAS,
press the switch again.
The LKAS indicator illuminates in 3colors as follows:
• [Green] - When the system operating condi‐tions are satisfied.
• [White] - The system operation conditionsare not satisfied. - The sensor does not detect lane
lines.
• [Yellow] - There is a malfunction with theLKAS. In this case, we recommend
you to have your vehicle inspectedby an authorized Kia dealer.
LKAS activation
0+'-
• The LKAS screen will appear on the LCD display if the system is activa‐
ted.
• When both lanes are detected and all the conditions to activate the LKAS
are satisfied, the steering wheel will
Driving your vehicle
7-84

• The width of the lane is below 2.6 mor over 4.5 m.
• ESC(Electronic Stability Control) and VSM(Vehicle stability management)are activated.
• When the system is on or after changing a lane, drive in the middle of
the lane. If not, the system will not
provide the steering assist function.
• The steering will not be assisted when you drive fast on a sharp curve.
• The steering will not be assisted when you change lanes fast.
• The steering will not be assisted when you brake suddenly.
Driver's attention
The driver must be cautious in the be‐
low situations for the system may not assist the driver and may not work
properly. • The lane is not visible due to snow, rain, stain, a puddle or many other
things.
• The brightness of the outside changes suddenly such as passing
through a tunnel.
• Not turning on the headlight or the light is weak even at night or in a
tunnel. • Difficult to distinguish the color of
the lane marker from the road.
• Driving on a steep grade or a curve.
• Light reflects from the water on the road such as sunlight, streetlight or
the light of oncoming vehicles.
• The lens or windshield is stained with foreign matter.
• The surrounding of the inside rear view mirror temperature is high due
to direct light.
• The lane is very wide or narrow.
• The lane marker is damaged or indis‐ tinct.
• The shadow is on the lane marker by a median strip.
• There is a mark similar to a lane marker.
• There is a boundary structure.
• The distance from vehicle ahead is very short or the vehicle ahead driveshiding the lane marker.
• The vehicle shakes heavily.
• The lane number increases or decrea‐ ses or the lane marker are crossing
complicatedly.
• Placing something on the dashboard. • Driving with the sun in front of you.
• Driving in areas under construction.
• The lane marker is more than two.
• The lane marker in a tunnel is hard to
distinguish due to dust or grease.
• The lane marker is hard to distinguish after raining at night.
• The lane marker is hard to distinguish due to dust.
• MDPS (motor driven power steering) is not operational.
• Some objects are attached in steering wheel.
• The windshield is fogged by humid air in the vehicle.
• The distance from the vehicle ahead is very short or the vehicle ahead
drives covering the lane line.
• The lane line is merged or divided.
• Driving through a toll plaza or toll gate.

7-87
7
Driving your vehicle

When the system is not used turn the
system off by pressing the switch.
When the system is turned on the warning light will illuminate for 3 sec‐
onds on the outside rearview mirror.
Warning type
The system will activate when: 1. The system is on
2. Vehicle speed is above 30 km/h (18.6 mph)
3. Other vehicles are detected in the rear side
TU
TUBHF
06.
If a vehicle is detected within the boun‐
dary of the system, a warning light will illuminate on the outside rearview mir‐
ror. If the detected vehicle is not in detec‐
tion range, the warning will be turned off.
OE
TUBHF
06.
The second stage alarm will activate
when: 1. The first stage alert is on
2. The turn signal is on to change a lane
When the second stage alert is activa‐ ted, a warning light will be blinking on
the outside rearview mirror and an
alarm will sound.
If you move the turn signal switch to origin position, the second stage alert
will be deactivated. The second stage alarm can be deacti‐
vated. • To activate the alarm: Go to the User Settings Mode
Sound and select "BSD" on the LCD
display.
• To deactivate the alarm: Go to the User Settings Mode
Sound and deselect "BSD" on the LCD
display.
CAUTION
The alarm function helps alert thedriver. Deactivate this function onlywhen it is necessary
Driving your vehicle
7-92