2017 KIA OPTIMA PHEV buttons

30*IF EQUIPPED OPTIMA PLUG-IN HYBRID FEATURES & FUNCTIONS GUIDE


The power outlets are inactive when ignition is in the OFF position .
UVO eServices with Premium Navigation*
Clock Setup:
Press the SETUP key, then the CLOCK button to display the Clock
setting screen . Then use the on-screen buttons to navigate through
setup and return
to exit . To access manual date and time setting,
turn GPS time OFF in the Clock Settings (UVO eServices with Premium
Navigation System*)
Digital Clock*
12V180WA
Aux/USB/iPod® Port & Power Outlets
QUICK TIP
REMINDER: Using the power outlet (accessory plug) for prolonged periods of time with the
engine off could cause the battery to discharge .
For more information on the Aux/USB/iPod
® Port & Power Outlets, refer to the Owner's Manual.
USB Charger*
The USB charger is located inside the Center Console and on rear
of the Center Console A .
(Rear of Center Console shown)
Use the Aux port to connect audio devices and the USB port to connect
USB audio devices, smartphones and iPod® devicesREMINDER: When needed, Daylight Savings must be enabled in the Clock
Settings screen
CENTER PANEL

32*IF EQUIPPED OPTIMA PLUG-IN HYBRID FEATURES & FUNCTIONS GUIDE
CLIMATE
A/C
OFFDRIVER
ONLY
MODE
ECON
REA RFRON T
CLIMA TE
A/C
OFFDRIVER
ONLY
MODE
ECON
REA RFRON T
Fan Speed
Control buttons
Temperature
Control knob
Driver Only
Fan Control
System OFF
button Mode Selection
button
Air Conditioning On/Off button Dual Climate
Control button
ECON (Economy Air
Conditioning) button
Automatic Climate Control button
Dual Temperature
Control knob
Climate information
screen selection button
Rear Windshield Defroster
Front Windshield
Defroster Recirculated Air
button
Automatic Climate Control*
Climate Control Auto Function
1 . Press AUTO to select Full Auto Operation . The Auto setting automatically controls the airflow
modes, fan speeds, air intake and air conditioning according to the temperature setting selected
2 . Set desired Temperature
3 . Press SYNC to synchronize driver and passenger temperature Defrost Outside Windshield:
1
. Set Fan Speed to the highest position
2 . Set Temperature to Hot
3 .
Press the Front Defrost button

Defog Inside Windshield:
1 . Set Fan Speed to desired position
2 . Set desired Temperature
3 . Press the Front Defrost button
Air Flow Modes:
To select Air Flow Modes, press the Mode
selection buttons:
Face-Level
Bi-Level
F lo o r- L evel
Floor/Defrost-Level
Your Automatic Climate Control system may differ from those in the illustrations. See your Owner’s Manual for more details. REMINDERS:

•MA X A /C Mode automatically engages Recirculated Air

• Pressing any button during AUTO operation will
deactivate the AUTO function and switch to manual
mode, except for Temperature Control

• When in AUTO mode, Air Flow mode and Fan Speed
do not display on the Climate Control Display

• Warm air may flow in through vents if Recirculated Air
button is not pressed ON (LED lit)


•Defrost mode [~] activates A /C and opens Fresh Air Vent to help
dehumidify the air and improve Defroster performance

•During Auto Operation, the A /C indicator will NOT illuminate .
The fan speed, air intake, air flow and air conditioning may
automatically be engaged at any time to reach desired
temperature and reduce humidity

•Keep inside glass as clean as possible to reduce window fogging
QUICK TIPSDriver Only Ventilation
Driver Only Ventilation restricts air flow
to the drtiver’s side vents only . This helps
to optimize driving range by limiting the
power drawn from the battery .
Press DRIVER ONLY button to enable air
flow through the driver’s side vents only .
CENTER PANEL

35*IF EQUIPPED
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS .


Driver Position Memory
System Video

To view a video on your
mobile device, snap this
QR Code or visit the listed
website .
Refer to page 2 for more
information .QR CODE
www.KuTechVideos.com/jf23/2017
Driver Position Memory System*
To store a seating position into memory, first place the shifter into P (Park)
while the ignition switch is ON . Then:
1 . Adjust the driver’s seat
2 . Press the SET button
A on the control panel . System will beep once
3 . Press one of the memory buttons
B within 5 seconds . The system will
beep twice when memory has been stored
4 . “Driver (1 or 2) set is memorized” will appear on the instrument cluster
LCD screen
C
Front Seat Headrest Adjustment
To raise headrest: Pull headrest up .
To lower headrest: Press lock
C, then press the headrest down .
SET
1
2
A
B
SEATING

40*IF EQUIPPED OPTIMA PLUG-IN HYBRID FEATURES & FUNCTIONS GUIDE
Fuel Door and Trunk Release
Press the button C to release the fuel door .
Pull the button
D to open the trunk .
Hood Release Lever and Latch
Opening the Hood:
1 . Pull the Hood Release Lever
A to u nlatch the Hood
2 . In the front of the vehicle, lift the Hood slightly, pull the secondary
Latch
B inside of the Hoo d’s center and lift the Hood
Closing the Hood: Lower the Hood about halfway and then press
down to securely lock in place .
(Buttons located on Driver's Door)
C
D
(Located on Driver side kick panel) (Latch located inside hood)
A
B


One-Click Fuel Cap Video
To view a video on your
mobile device, snap this
QR Code or visit the listed
website .
Refer to page 2 for more
information .QR CODE
www.KuTechVideos.com/jf23/2017
CLICK!
Fuel Cap / Malfunction
Indicator (Check Engine Light)
Tighten for ONE CLICK to prevent Malfunction
Indicator
from illuminating .
REMINDER: The Fuel Filler Door Release button is
located on the lower part of the driver’s door panel .
REMINDERS:

•Sunvisor may not shield all direct light

• Do not operate the vehicle if Sunvisor is impairing your visibility

•
Be aware of your seating position when adjusting or swinging
Sunvisor around from the front or side windows
Sunvisor
Use the Sunvisor to shield
direct light through the front
or side windows . Slide the
Sunvisor out and adjust
as needed .
OTHER KEY FEATURES