2017 KIA OPTIMA PHEV brake

26*IF EQUIPPED OPTIMA PLUG-IN HYBRID FEATURES & FUNCTIONS GUIDE
STEERING WHEEL CONTROLS


Advanced Smart Cruise
Control Video

To view a video on your
mobile device, snap this
QR Code or visit the listed
website .
Refer to page 2 for more
information .
www.KuTechVideos.com/jf23/2017
QR CODE


To change the Cruise Control mode from ASCC to standard
Cruise Control, press and hold button
A . Repeat to switch
modes again ( The ASCC system must not be activated to
change modes) .
For the ASCC System to operate:

•When no vehicle is in front, you must be travelling at a
minimum speed of 20 mph

•When following a vehicle, there is no minimum speed
requirement
When following a vehicle, the system will automatically adjust
your cruise speed based on the vehicle in front . It will even
bring the vehicle to a complete stop if necessary .
Advanced Smart Cruise Control (ASCC)*
The Advanced Smart Cruise Control (ASCC)* system allows you to set the vehicle to
maintain a speed so long as it is not limited by traffic . When traffic is encountered, the
vehicle will be slowed to maintain a set distance behind traffic without depressing the
accelerator or brake pedal .
To set/adjust the ASCC speed:

• Push the CRUISE button
A to turn system ON . The CRUISE indicator will illuminate
on the instrument cluster

• Accelerate/decelerate to the desired speed

• Move the ASCC lever
B to set or adjust speed
To adjust the vehicle-to-vehicle distance setting
C, press the ASCC button D on
the steering wheel . The images on the LCD screen E and the Instrument Cluster F
will change when scrolling through the settings . Each time the button is pressed, the
vehicle-to-vehicle distance changes .
To turn system OFF, press the CRUISE button
A . The CRUISE indicator on the
instrument cluster will turn OFF and the LCD screen ASCC image will show canceled G .
QUICK TIPS
REMINDERS:

•Cruise Control button must be ON in order to turn ASCC ON/OFF

•ASCC system is activated when ignition is turned on . Speed will need to be reset when ignition is cycled on

• The distance settings are approximations and may vary depending on factory settings at the time . See owner’s
manual for more information
A
B
D
Smart Cruise Control canceled
F
EG
17 2 f t 13 0 f t
82ft 10 6 f t
C

34*IF EQUIPPED OPTIMA PLUG-IN HYBRID FEATURES & FUNCTIONS GUIDE
Auto Hold*
Auto Hold temporarily maintains the vehicle
at a standstill even if the brake pedal is
released . Auto Hold can be turned ON/
OFF using the AUTO HOLD switch
B on
the driver’s panel . Before Auto Hold will
operate, the driver’s door, engine hood and
trunk must be closed, and the driver’s seat
belt must be fastened .
The Auto Hold indicator has four states:
White: Standby - With vehicle at a
standstill, and AUTO HOLD switch
B
turned ON, the indicator will illuminate
white . While driving the vehicle (vehicle is
not at a standstill), the Auto Hold indicator
will remain white .
Green: Engaged - When coming to a
complete stop by depressing the brake
pedal, the Auto Hold indicator changes from white to green .
OFF (not illuminated) - The indicator will turn OFF when the AUTO
HOLD switch
B is turned OFF or when the EPB is manually turned ON .
Yellow: Malfunction - When the indicator is illuminated yellow, there
may be a system malfunction . Take your vehicle to a local Kia dealer .
Refer to page 4 for location of Instrument Cluster indicators.
Electric Parking Brake (EPB)*
The Electric Parking Brake (EPB) system utilizes
an electric motor to engage the parking brake .
Applying the Parking Brake
Depress the brake pedal and pull up the EPB
switch
A . Ensure that the indicator light
is illuminated on the instrument cluster .
Releasing the Parking Brake
The EPB will automatically release when the
shifter is placed in Reverse or Drive .
To release EPB manually, depress the brake pedal, then press the EPB
switch
A, with the ignition switch in the ON position . Ensure that the
indicator light
i s O F F .


Electric Parking Break
(EPB)/Auto Hold Video

To view a video on your
mobile device, snap this
QR Code or visit the listed
website .
Refer to page 2 for more
information .QR CODE
www.KuTechVideos.com/jf23/2017
A
B
(Located on Center Panel)
REMINDERS:

• As a bulb check, the EPB malfunction indicator will illuminate for approximately 3 seconds
when the ignition switch is turned ON

• If the warning light does not illuminate temporarily, or continues to remain lit, take your
vehicle to an authorized Kia dealer and have the system checked

•The EPB should not be operated while the vehicle is moving

• A click or electric brake motor sound may be heard while operating or releasing the EPB,
but these conditions are normal and indicate that the EPB is functioning properly

•When leaving your keys with parking lot attendants or valet, make sure to
inform them how to operate the EPB

•If parked on a steep incline, pull up the EPB switch for more than 3 seconds for
a firmer EPB application

•Pull up and hold EPB switch a second time to increase brake pressure if parked
on a decline or incline
QUICK TIPS
CENTER PANEL

Normal Maintenance Schedule
When your vehicle requires service, remember that your dealer knows your vehicle best . Your dealer has factory-trained technicians, recommended special tools,
genuine Kia replacement parts and is dedicated to your complete satisfaction . For expert advice and quality service, see your authorized Kia dealer .
* And, if necessary, adjust, correct, clean, or replace .
1 . If TOP TIER detergent gasoline is not available, one bottle of additive is recommended . Additives
are available from your authorized Kia dealer along with information on how to use them . Do not
mix other additives .
2 . Inspect HSG belt for evidence of cuts, cracks, excessive wear or oil saturation and replace if
necessary . If HSG belt noise occurred, readjust HSG belt tension before replacing .* And, if necessary, adjust, correct, clean, or replace
.
1 . If TOP TIER detergent gasoline is not available, one bottle of additive is recommended . Additives are available from your authorized Kia dealer along with information on
how to use them . Do not mix other additives .
2 . Inspect HSG belt for evidence of cuts, cracks, excessive wear or oil saturation and replace if necessary . If HSG belt noise occurred, readjust HSG belt tension before
replacing .
MAINTENANCE


Check your Maintenance Schedule or schedule an appointment with a dealer using your UVO eServices account by logging into your UVO App or your account on MyUVO . com
( Vehicles equipped with UVO eServices only; see page 28 for setup information)QUICK TIP
45*IF EQUIPPED
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS .
7,500 miles
PERFORM:

• Add fuel additive
1

• Rotate tire position
REPLACE:
• Engine oil and filter
INSPECT*:
• Air cleaner filter

• HSG belt
2

• Vacuum hose 15,000 miles
PERFORM:

• Add fuel additive
1

• Rotate tire position
REPLACE:
• Climate control air filter (for evaporator and blower unit)

• Engine oil and filter
INSPECT*:
• Air cleaner filter

• HSG belt
2

• Vacuum hose

• Air conditioning refrigerant

• Brake hoses and lines

• Drive shafts and boots
• Exhaust pipe and muffler

• Front brake disc/pads, calipers and rotors

• Rear brake disc/pads

• Steering gear box, linkage & boots/lower
arm ball joint, upper arm ball joint

• Suspension mounting bolts

* And, if necessary, adjust, correct, clean, or replace .
1 . If TOP TIER detergent gasoline is not available, one bottle of additive is recommended .
Additives are available from your authorized Kia dealer along with information on how to
use them . Do not mix other additives .
2 . Inspect HSG belt for evidence of cuts, cracks, excessive wear or oil saturation and replace if
necessary . If HSG belt noise occurred, readjust HSG belt tension before replacing .* And, if necessary, adjust, correct, clean, or replace
.
** If equipped
1 . If TOP TIER detergent gasoline is not available, one bottle of additive is recommended . Additives are available from your authorized Kia dealer along with information
on how to use them . Do not mix other additives .
2 . Fuel filter & fuel tank air filter are considered to be maintenance free but periodic inspection is recommended for this maintenance schedule depends on fuel quality .
If there are some important safety matters like fuel flow restriction, surging, loss of power, hard starting problem etc ., replace the fuel filter immediately regardless of
maintenance schedule and consult an authorized Kia dealer for details .
MAINTENANCE
46*IF EQUIPPED OPTIMA PLUG-IN HYBRID FEATURES & FUNCTIONS GUIDE
22,500 miles
PERFORM:

• Add fuel additive
1

• Rotate tire position
REPLACE:
• Engine oil and filter
INSPECT*:
• Air cleaner filter

• HSG belt
2

• Vacuum hose 30,000 miles
PERFORM:

• Add fuel additive
1

• Rotate tire position
REPLACE:
• Air cleaner filter

• Climate control air filter (for evaporator and blower unit)

• Engine oil and filter
INSPECT*:
• Air conditioning refrigerant

• Brake fluid

• Brake hoses and lines

• Drive shafts and boots

• Exhaust pipe and muffler

• Front brake disc/pads, calipers and
rotors

• Fuel filter
2

• Fuel cap, fuel lines, fuel hoses and
connections
• Fuel tank air filter**
2

• HSG belt

• Rear brake disc/pads

• Parking brake

• Steering gear box, linkage & boots/lower
arm ball joint, upper arm ball joint

• Suspension mounting bolts

• Vacuum hose

• Vapor hose and fuel filler cap
Normal Maintenance Schedule (Continued)

MAINTENANCE
* And, if necessary, adjust, correct, clean, or replace .
1 . If TOP TIER detergent gasoline is not available, one bottle of additive is recommended . Additives
are available from your authorized Kia dealer along with information on how to use them . Do not
mix other additives .
2 . Inspect HSG belt for evidence of cuts, cracks, excessive wear or oil saturation and replace if
necessary . If HSG belt noise occurred, readjust HSG belt tension before replacing .* And, if necessary, adjust, correct, clean, or replace
.
1 . If TOP TIER detergent gasoline is not available, one bottle of additive is recommended . Additives are available from your authorized Kia dealer along
with information on how to use them . Do not mix other additives .
2 . Inspect HSG belt for evidence of cuts, cracks, excessive wear or oil saturation and replace if necessary . If HSG belt noise occurred, readjust HSG belt
tension before replacing .
47*IF EQUIPPED
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS .
37,500 miles
PERFORM:

• Add fuel additive
1

• Rotate tire position
REPLACE:
• Engine oil and filter
INSPECT*:
• Air cleaner filter

• HSG belt
2

• Vacuum hose 45,000 miles
PERFORM:

• Fuel additive
1

• Rotate tire position
REPLACE:
• Climate control air filter (for evaporator and blower unit)

• Engine oil and filter
INSPECT*:
• Air cleaner filter

• Air conditioning refrigerant

• Brake hoses and lines

• Drive shafts and boots

• Exhaust pipe and muffler

• Front brake disc/pads and calipers

• HSG belt
2

• Rear brake disc/pads

• Steering gear box, linkage & boots/lower arm ball joint, upper arm ball joint

• Suspension mounting bolts

• Vacuum hose
Normal Maintenance Schedule (Continued)

MAINTENANCE
* And, if necessary, adjust, correct, clean, or replace .
** If equipped
1 . If TOP TIER detergent gasoline is not available, one bottle of additive is recommended . Additives are available from your authorized Kia dealer along with information on
how to use them . Do not mix other additives .
2 . Fuel filter & fuel tank air filter are considered to be maintenance free but periodic inspection is recommended for this maintenance schedule depends on fuel quality .
If there are some important safety matters like fuel flow restriction, surging, loss of power, hard starting problem etc ., replace the fuel filter immediately regardless of
maintenance schedule and consult an authorized Kia dealer for details .
* And, if necessary, adjust, correct, clean, or replace
.
1 . If TOP TIER detergent gasoline is not available, one bottle of additive is recommended . Additives
are available from your authorized Kia dealer along with information on how to use them . Do not
mix other additives .
2 . Inspect HSG belt for evidence of cuts, cracks, excessive wear or oil saturation and replace if
necessary . If HSG belt noise occurred, readjust HSG belt tension before replacing .
48*IF EQUIPPED OPTIMA PLUG-IN HYBRID FEATURES & FUNCTIONS GUIDE
52,500 miles
PERFORM:

• Add fuel additive
1

• Rotate tire position
REPLACE:
• Engine oil and filter
INSPECT*:
• Air cleaner filter

• HSG belt
2

• Vacuum hose 60,000 miles
PERFORM:

• Add fuel additive
1

• Rotate tire position
REPLACE:
• Air cleaner filter

• Climate control air filter (for evaporator and blower unit)

• Engine oil and filter

• HSG belt
INSPECT*:
• Air conditioning refrigerant

• Brake hoses and lines

• Drive shafts and boots

• Exhaust pipe and muffler

• Front brake disc/pads and calipers

• Rear brake disc/pads

• Steering gear box, linkage & boots/lower
arm ball joint, upper arm ball joint
• Suspension mounting bolts

• Brake fluid

• Fuel cap, fuel lines, fuel hoses and
connections

• Fuel tank air filter**
2

• Parking brake

• Vacuum hose

• Vapor hose and fuel filler cap
Normal Maintenance Schedule (Continued)