7
Cruise Control (if so equipped)
To activate the cruise control, push the ON/OFF switch 1 on the
steering wheel.
To set a cruising speed, accelerate the vehicle to the desired speed,
push the switch 2 on the steering wheel down toward COAST/SET
and release.
To reset at a faster cruising speed, push and hold the switch 3 up
toward ACCEL/RES. When the vehicle attains the desired speed, release
the switch.
To cancel the preset speed, tap the brake pedal or push the
CANCEL switch 4. To turn off cruise control, push the ON/OFF switch 1.
VEHICLE-TO-VEHICLE DISTANCE CONTROL MODE(if so equipped)
• Press the vehicle-to-vehicle distance button 5 on the steering wheel
repeatedly to change the set distance.
• When a vehicle is not detected ahead, the set distance and set vehicle
speed indicator lights will illuminate 6 in set mode. • When a vehicle is detected ahead, the vehicle ahead detection, set
distance and set vehicle speed indicator lights will illuminate 7 in
set mode.
TO USE CONVENTIONAL (FIXED SPEED) CRUISE CONTROL MODE
(if so equipped)
• While cruise control is off, push and hold the ON/OFF switch 1 on the
steering wheel for more than 1.5 seconds. The CRUISE indicator light
will illuminate.
• Accelerate to the desired speed. • Push the switch 2 down toward COAST/SET and release it. The SET
indicator light will illuminate.
Please see your Owner’s Manual for important safety information, syst\
em limitations, and additional
operating and feature information.
5
4
3
2
1
67
8
Wiper and Washer Switch
REAR WIPER AND WASHER
Intermittent (INT) — Rear wiper
operates intermittently.
Low (ON
) — Rear wiper operates at a
continuous low-speed.
Push the lever forward 3 to activate
the rear washer.
3
RAIN-SENSING AUTOMATIC WIPER SYSTEM
To set the Rain-Sensing Automatic
Wiper System:
Push the lever down to the AUTO
position
4.
The rain sensor sensitivity level can be
adjusted by:
Turning the knob toward the front (High) for
High Sensitive Operation 5.
Turning the knob toward the rear (Low) for
Low Sensitive Operation
6.
To turn the Rain-Sensing Automatic Wiper
System off, push the lever to the OFF position.
Please see your Owner’s Manual for important safety
information, system limitations, and additional operating and
feature information.
4
56
Move the lever 1 up or down to one of
the following positions to operate the windshield wipers:
MIST
One sweep operation
OFF
Wipers are OFF
AUTO
Rain-sensing automatic wipe
LO
Continuous wipe, slow
HI
Continuous wipe, fast
To adjust the wiper sensitivity for the AUTO setting, twist
the control ring
2.
Pull the lever
1 toward you operate the
windshield washer.
1 2
