2017 INFINITI QX50 display

2. Getting started
2-6
tioner status, fuel economy or naviga-
tion directions.
*10:
Push to switch between the day screen
(bright) and the night screen (dark).
Push and hold to turn off the display.
Push again to turn on the display.
INFO:
.
If needs to be pushed to apply the
setting on a settings screen, this manual
will explicitly include a step for this
procedure. Otherwise, pushing re-
turns the display to the previous screen.
.The layout of the control panel switches may
vary depending on the vehicle model and
equipment.
INFINITI CONTROLLER
With Directional buttons
*1:
Push to select the highlighted item on
the screen.
If this button is pushed while a map is
displayed, the map menu screen is
displayed.
*2Main directional buttons:
Use to move across the map, highlight
an item on the screen or adjust a
setting (volume, brightness, etc.).
*3Additional directional buttons:
Use to move across the map or high-
light an item on the character input
screen.
*4Center dial:
Turn to highlight an item on the screen
or adjust a setting.
The center dial can also be used to
adjust the map scale.
Without Directional buttons
*1:
Push to select the highlighted item on
the screen.
If this button is pushed while a map is
displayed, the map menu screen is
displayed.
*2Center dial/Slide switch:
Center dial
Turn to highlight an item on the screen
or adjust a setting.

The center dial can also be used to
adjust the map scale.
Slide switch
Slide (push upward/downward/left-
ward/rightward) to select an item on
the screen or to adjust a setting
(volume, brightness, etc.).
The map can be scrolled in 8 directions
by sliding this switch.
STEERING WHEEL SWITCHES
Type A
Type B
Type C
Type D
Type E
*1:
Tilt to highlight an item on the screen
or adjust a setting. Push to select the
highlighted item.
If this button is pushed while a map is
displayed, the map menu screen is
2. Getting started
2-7

2. Getting started
2-8
displayed.
“Map menu screen”(page 2-18)
Push and hold while a map or status
screen is shown to display the Start
Menu.
“Start menu” (page 2-13)
If this button is tilted up while the
audio function is activated and the
map or status screen is displayed, the
audio system can be operated.
*2<−+>:
Use to adjust the volume. These
buttons have the same function as
that of the volume control knob. Refer
to the vehicle Owner’s Manual.
*3:
Push this button during a setting
operation to return to the previous
screen. In a settings screen, this
button can also be used to apply the
setting.
*4:
Push to start the voice recognition
system. If the voice recognition system
is already activated, pushing this
button cancels the voice guidance
and a voice command can be spoken immediately.
*5:
Use to switch the audio mode (source).
Refer to the vehicle Owner’s Manual.
*6<>:
Push to display the phone mode
screen.
Refer to the vehicle Owner’s Manual.
*7<>:
Push to change what is shown on the
vehicle information display.
Refer to the vehicle Owner’s Manual.
STARTING SYSTEM
The navigation system starts when the
ignition switch is turned to the ACC or ON
position.
NOTE:
Do not keep the navigation system on with the
engine or the hybrid system stopped. Doing so
may discharge the vehicle battery (12V bat-
tery). When you use the navigation system,
always keep the engine or the hybrid system
running.

NAVIGATION SYSTEM STATUS SCREEN
By pushingat any time, a split
screen with audio information that is
always at the top can be displayed.
Each time is pushed, the bottom
part of the screen changes between air
conditioner, fuel economy and navigation
directions.
INFO:
There are different status screens displayed
depending on various factors, such as the
currently active mode, whether a destination
has been set or not, etc.
When a route to the destination is set and the
audio system is on, a screen similar to the one above appears.
*1Turning direction at the next intersec-
tion
*2Name of the next street
*3Distance to the next intersection
*4Distance remaining to the destination
*5Remaining time to the destination
When a route to the destination is not set
and the audio system is off, a screen
similar to the one above appears.
2. Getting started
2-9

.Home
. Address Book
. Previous Destinations
. Nearby places
. My places
. Map input
TOUCH SCREEN OPERATION
The same operations described for the
scrolling dial are possible using touch
screen operation.
MENU SCREEN AND OPERATION METHOD
MENU SCREENS AND THEIR PURPOSES
Push , , or
to display the corresponding
menu screen.
How to select menu item
Example: screen
1. Highlight the preferred menu item using the INFINITI controller. 2. To select the highlighted menu item,
push . The next screen is
displayed.
3. Push to return to the previous
screen.
Push

Without directional buttons
There are five main methods to control the
navigation system: the center dial, the
main directional buttons, the slide switch,
the touch panel and the switches on the
steering wheel. Use these controls to
adjust the volume of the phone and voice
guidance, the display brightness, etc.
How to adjust
1. Highlight the preferred setting item andpush . The color of the corre-
sponding adjustment item changes. 2. Adjust the value or level indicating bar
using the INFINITI controller.
3. Push or to apply the
setting.
INFO:
.
The volume of phone and voice guidance,
the display brightness, etc. can be adjusted
by tilting on the steering wheel up
and down.
.These same adjustments can also be
performed using the touch panel operation.
“Adjusting volume and others”
(page 2-15)
START MENU
The start menu can be displayed using the
switches on the steering wheel.
1. Push and hold on the steering
wheel.
2. Highlight the preferred item and push .
INFO:
on the steering wheel can be used to
display the start menu only when the map or
status screen is displayed.
Available setting items
2. Getting started
2-13

2. Getting started
2-14
.[Destination]:
Displays the destination screen. It is
the same screen that appears when
is pushed.
“4. Setting destination”
. [Route]:
Displays the route screen. It is the
same screen that appears when
is pushed.
“5. Route guidance”
. [Info]:
Displays the information screen. It is
the same screen that appears when
is pushed.
“7. Viewing technical information”
. [Settings]:
Displays the settings screen. It is the
same screen that appears when
is pushed.
“8. Other settings”
LIST SCREEN
After searching for a point of interest, a list
screen is displayed.
Depending on the list displayed, it can be
sorted.
Items displayed in list
*1Highlight the preferred item from the
list and push to select it. If a
location or facility name is not com-
pletely displayed (due to length), high-
light the item to display the hidden part of the name.
*2Distance from the current location
*3Direction to the point of interest
*4If the entire list cannot be displayed on
the screen, the system displays the
total number of items in the list and
the entry number of the selected item.
Scroll the list using the INFINITI con-
troller.

*5The list will automatically scroll to the
section of the list that begins with the
letter selected.
INFO:
This feature is only available when the list is
sorted by name and is not active for all lists.
*6Highlight and pushto select
the other sort options.
*7When the list is sorted by the shortest
distance, the selected location can be
confirmed in the preview displayed on
the right side of the screen.
*8Highlight and push to modify
the search conditions.
TOUCH PANEL OPERATION
With this system, it is possible to use the
INFINITI controller and touch panel opera-
tion to perform the same operations.
This manual describes the operations
using the INFINITI controller.
For the operations that differ from those of
the INFINITI controller and for useful
methods for using the touch panel opera-
tion, refer to each section.
EXAMPLE OF TOUCH PANEL OPERA-
TION
Examples of operations performed using
the touch panel operation are described
here.
Selecting item
When the item is touched, the next screen
is displayed.
Adjusting volume and others
Touch [+] or [−] located on the right and left
of the bar graph to perform the adjust-
ment.
Scrolling a list or message
Touch []or[] to scroll the list or
message.
Touch [
]or[] to skip to the next page.
2. Getting started
2-15