4
Instrument Panel
1 Multi-function control touch-screen / RearView Monitor display / Aroun d View® Monitor (AVM)
display (if so equipped)
2 Climate control panel
• Heater and air conditioning (automatic)
• Front/Rear window defroster
3 Navigation control panel
4 Audio control panel
5 Shift lever
6 Push-button ignition system (behind the steering wheel)
7 Adaptive Front Lighting system switch (behind the steering wheel)
8 Tilt/Telescopic steering wheel switch (behind the steering wheel)
9 Parking brake
10 Hood latch release
11 Lower switch bank
• Vehicle Dynamic Control (VDC) OFF switch • Trunk release • Rear sunshade switch (if so equipped) •
Warning Systems switch (if so equipped) • Heated steering wheel switch (if so equipped)
•
Backup Collision Intervention on/off switch
(if so equipped)
2586986_17a_Q70_US_pQRG_090916.indd 49/9/16 4:04 PM
8
5
6
Cruise Control
3
2
1
4
3
2 1
CONVENTIONAL CRUISE CONTROL (if so equipped)
SETTING A CRUISING SPEED
•
Press
the CRUISE ON/OFF switch
1 to turn on the system.
•
With the vehicle at the desired speed, push down the switch 2 to COAST/SET to enable
cruise control.
•
The cruising speed can be adjusted to a higher or lower speed by togglin\
g the control
switch
2 up or down.
CANCELING THE PRESET SPEED
•
Push
the CANCEL switch
3 or tap the brake pedal.
INTELLIGENT CRUISE CONTROL (ICC) (if so equipped)
The ICC system is designed to maintain a selected distance from the vehi\
cle in front of you and
reduce the speed to match a slower vehicle ahead.
•
To increase the distance to the vehicle ahead to be maintained by the IC\
C system, press
the button
4 until the display shows the desired set distance, which is shown by the
number of lines on the indicator
5.
•
When a vehicle is detected ahead, a car icon will illuminate on the indi\
cator 6 and your
vehicle will reduce the speed to match the slower vehicle.
To use Conventional (fixed speed) Cruise Control mode (if so equipped\
)
•
While cruise control is off, push and hold the CRUISE ON/OFF
switch
1 for more than
1.5 seconds. The CRUISE indicator light will illuminate.
• Accelerate to the desired speed.
•
Push the switch 2 down toward COAST/SET and release it. The SET indicator light
will illuminate.
Please see your Owner’s Manual for important safety information, syst\
em limitations, and additional operating and
feature information.
INTELLIGENT CRUISE CONTROL (ICC) (if so equipped)
2586986_17a_Q70_US_pQRG_090916.indd 89/9/16 4:04 PM
