2017 Hyundai Sonata Hybrid run flat

[x] Cancel search: run flat

Page 22 of 562

Hyundai Sonata Hybrid 2017  Owners Manual I-11
Storage compartment ....................................................3-155Center console storage .............................................3-155
Glove box ..................................

Page 80 of 562

Hyundai Sonata Hybrid 2017  Owners Manual 2-51
Safety system of your vehicle
2
10. Side pressure sensors
11. Driver’s knee air bag module
12. Driver’s and front passenger’sseat belt buckle sensors
13. Anchor pre-tensioner
14. Occupant c

Page 436 of 562

Hyundai Sonata Hybrid 2017  Owners Manual 6-11
What to do in an emergency
6
If any of the below happens, have
the system checked by an author-
ized HYUNDAI dealer.
1. The  Low Tire  Pressure Telltale/TPMS Malfunction Indicator
does not illumi

Page 449 of 562

Hyundai Sonata Hybrid 2017  Owners Manual 6-24
It is possible that some tires, espe-
cially with larger punctures or dam-
age to the sidewall, cannot be sealed
completely.
Air pressure loss in the tire may
adversely affect tire performance.
F

Page 452 of 562

Hyundai Sonata Hybrid 2017  Owners Manual 6-27
What to do in an emergency
5. Insert the sealant bottle into thehousing (4) of the compressor so
that the bottle is upright.
6. Ensure that the compressor is switched off, position 0. 7. Plug the

Page 453 of 562

Hyundai Sonata Hybrid 2017  Owners Manual 6-28
9. Switch off the compressor.
10. Detach the hoses from thesealant bottle connector and
from the tire valve.
Return the Tire Mobility Kit to its stor-
age location in the vehicle.
Distributing th

Page 454 of 562

Hyundai Sonata Hybrid 2017  Owners Manual 6-29
What to do in an emergency
4. Adjust the tire inflation pressure tothe recommended tire inflation.
With the ignition switched on, pro- ceed as follows.
- To increase the inflation pres- sure: 
Sw

Page 538 of 562

Hyundai Sonata Hybrid 2017  Owners Manual 7-81
7
Maintenance
1. Using a flat-head screwdriver,gently pry the lens from the interi-
or light housing.
2. Remove the bulb by pulling it straight out.
3. Install a new bulb in the socket.
4. Align