
GETTING STARTED
SANTA FE SPORT
05 04
HYUNDAI 
Telescopic
HEADREST  ADJUSTMENT
To Raise Headrest: 
Pull headrest up.
To Lower Headrest: 
Press lock button while pressing 
down on headrest.
To Adjust Headrest Forward:  
Pull forward to 1 of 3 positions
To Adjust Backward:  
Press lock button and push  
headrest backwards.
SEAT  BELT  ADJUSTMENT (Front seat)
Pull up to raise.Press button and 
push down to 
lower.
FUEL  FILLER  LIDSTEERING  WHEEL  ADJUSTMENTS
TiltNOTE
 Do not adjust while driving.
1. Pull the lever 
A down to release.
2. Set the angle B and distance 
C
3. Pull the lever 
A up to lock. 
A
B
C
REAR  SEAT  FOLDING
From cargo areaRear center seatback
FEATURES AND CONTROLSCheck the engine oil regularly between recommended oil changes.
Storing 
 1.  Adjust the driver’s seat position,  
outside rearview mirror position and 
instrument panel illumination intensity.
2.   
Press the SET button. The system 
will beep once.
3.   
Press one of the memory buttons 
(1 or 2) within 5 seconds.  
The system will beep twice. 
DRIVER  POSITION MEMORY  SYSTEM
NOTE
 Transmission must be in P (Park).
Recalling
 Press the desired memory button(1 or 2). The system will beep once.
NOTE  

FEATURES AND CONTROLS
SANTA FE SPORT
11 10
HYUNDAI 
HOMELINK  WIRELESS  CONTROL  SYSTEM
Home Link
Standard Programming To train most devices, follow these instructions:
1.  For first-time programming, press and hold the two outside 
buttons, HomeLink
® Channel 1 and Channel 3 Buttons, until the 
indicator light begins to flash (after 20 seconds). Release both 
buttons. Do not hold the buttons for longer than 30 seconds.
2.  Position the end of your hand-held transmitter 1-3 inches (2-8 cm) 
away from the HomeLink
® buttons while keeping the indicator light 
in view.
3.  Simultaneously press and hold both the HomeLink
® and hand-held 
transmitter button. DO NOT release the buttons until step 4 has 
been completed.
4.  While continuing to hold the buttons the red indicator Status LED 
will flash slowly and then rapidly after HomeLink
® successfully 
trains to the frequency signal from the hand-held transmitter. 
Release both buttons.
For detail instructions, refer to your Owner’s Manual or visit  
www.homelink.com.
INTERIOR  LIGHTS
Push the lens 
 to turn the
map lamp on or off.
ON Map lamp and room lamp will turn on.OFF The lights stay off at all times, 
even if a door is opened.DOOR Map lamp and room lamp
comes on when a door is opened.
Press the switch to turn the light  
on or off.
Without sunroof
With sunroofRoom lamp  

FEATURES AND CONTROLS
SANTA FE SPORT
17 16
HYUNDAI 
AIR  INTAKE  CONTROL DEFROSTING / DEFOGGING
2.  Set the temperature 
control towards 
warmer setting.3.  Set the fan speed to 
  the highest setting. 1.  Press the front 
windshield defrost 
button.
Press to activate/deactivate the 
rear window and side mirrors 
defroster.REAR  WINDOW  AND SIDE  
MIRRORS DEFROSTER
Changing the direction of
the air flow as follows:MODE  SELECTION
Face levelBi-LevelFloor levelFloor/Defrost LevelDefrost Level
 
 MAX A/C (Max air conditioning) button
  A/C (Air conditioning) button
  Mode selection buttons
  Fan speed control knob
 Rear window defrost button Front windshield defrost button Temperature control button Air intake control button
NOTETo reduce tendency of the glass
fogging and also to improve visibility,
keep the interior surface of the
windshield clean by wiping it with  
a clean cloth and glass cleaner. 
In addition, select air intake control 
to the outside (fresh) air position 
whenever possible while operating 
the vehicle.
Outside (fresh) air positionRecirculated air position
Manual Climate Control  

FEATURES AND CONTROLS
SANTA FE SPORT
19 18
HYUNDAI 
Press the SYNC 
button to operate the 
driver and passenger 
side temperature 
individually.
SYNC  BUTTON
DEFROSTING / DEFOGGING
3. Set the fan speed to 
     the highest setting. 2. Set the temperature 
     control towards   
     warmer setting.1. Press the front    
     windshield defrost    
     button.
SYSTEM  OFF  MODEPressing the OFF button will place the system in the off mode. r  Front blower will turn off. r  Outside (fresh) air position    
 selected. r  Vented air at last set temperature.
Press to activate /
deactivate 
the rear defroster.
REAR  WINDOW  DEFROSTER AUTOMATIC HEATING  
AND COOLING
2.  Set the driver's 
temperature control 
to the desired setting. 1.  Press the AUTO 
button.
The modes, fan speeds, air 
intake, and air-conditioning 
will be controlled automatically 
according to the temperature 
setting.
Changing the 
direction of the  
air flow as  follows:
MODE  SELECTION
Floor & 
Defrost
Face
Level
Bi-
Level
Floor
Level
Automatic Climate Control
AIR  INTAKE  CONTROL
Recirculated 
air positionOutside (fresh) 
air position
SYNC
 
 Air conditioning button  Driver’s temperature  
control button Mode selection button
 Air intake control buttons Front windshield defrost button Fan speed control knob  AUTO (automatic control) button
 OFF button Rear window defrost button
  Sync temperature control  
     selection button
  Passenger’s temperature  
control button  Climate control information 
screen selection button
NOTETo reduce tendency of the glass
fogging and also improve visibility,
keep the interior surface of the
windshield clean by wiping it with  
a clean cloth and glass cleaner.
In addition, select air intake control 
to the outside (fresh) air position 
whenever possible while operating 
the vehicle.
The auto defogging system automatically controls 
moisture of the windshield inside while the climate 
control system is operating. This indicator illuminates 
when the auto defogging system senses the moisture of 
inside the windshield and has activated
AUTO DEFOGGING SYSTEM