2017 Hyundai Ioniq Hybrid phone

31
Favorites
Press the PHONE key, and then
Favorites.
Name Description
FavoritesLists the phone
numbers saved as
Favorites. Select
from the list to dial
the number.
Add New
Adds a new number
to Favorites.
Delete
Items Deletes numbers
that you select from
Favorites.
Delete All
Deletes all of the
numbers from
Favorites.
)@"&
)&7
@(<64"@&6>"7/@23(JOEE



7
@(<64"@&6>"7/@23(JOEE


 


ß
1
 

32
Precautions Required
for Successful Voice
Recognition
1. Voice recognition supports only
the commands that are displayed
on the screen and written in the
User’s Guide.
2. To ensure the correct recognition
and execution of your command,
say your command when you hear
the beep after a voice prompt.
3. Voice recognition automatically
ends if:
1) A call is incoming or outgoing
2) A media device (USB or iPod,
etc.) is connected or discon-
nected
3) The rear view camera is oper-
ated
4) The car engine starts or stops
5) A system key, such as
RADIO
key or
MEDIA key is selected
6) An emergency occurs, for
example re-searching for the
route after the navigation route
has been lost 4.
The microphone used for the
voice recognition system is
located in the headliner directly
above the driver’s head. To make
your commands better under-
stood, keep your body straight in
the driver’s seat when speaking
the command.
5. Speaking naturally and clearly will
ensure better recognition of your
voice commands.
6. In the following cases voice rec-
ognition will be affected by ambi-
ent noise.
1) The sound of the wind if any
window or the sun roof is open.
2) High speed blower from the
air vents. Set climate control to
blow lower than level 3.
3) Vibrations from passing
through a tunnel.
4) Vibrations from driving on an
uneven road.
5) Storms and heavy rain.
Voice Recognition
)@"&
)&7
@(<64"@&6>"7/@23(JOEE


 7
@(<64"@&6>"7/@23(JOEE


 


ß
1
 

36
Voice Commands
Types of Commands
Voice recognition commands are classified as “Global Commands” and “Local
Commands.”
1. Global Commands (
●): Commands that can be used immediately after acti-
vating voice recognition.
2. Local Commands (
○): Commands that can be used when a multimedia,
navigation, or Bluetooth call is running, or displayed on the screen, after
activating voice recognition.
Call Commands
* Check the following before using call commands:
1. Voice commands related to phone calls can be used after connecting a Bluetooth device.
2. To call a person, for example “Call ” whose name is listed in Contacts, you must first download the Contacts list. For details on down-
loading contacts, see “Part 4. Bluetooth > Chapter 3. Bluetooth Phone > 4.10
Contacts”.
3. After downloading the Bluetooth contacts, it will take some time to convert the Contacts into voice data during which time you cannot make a call by
name yet. The time it takes to convert voice data may vary depending on
the number of Contacts downloaded on the phone.
Voice Recognition
)@"&
)&7
@(<64"@&6>"7/@23(JOEE


 7
@(<64"@&6>"7/@23(JOEE


 


ß
1
 

37
CommandOperation
●CallDisplays downloaded Contacts, after this you can make
a call by saying the name.
●Call You can directly call a person by in the down-
loaded Contacts.
●Call on
MobileYou can call a person directly to the number
that is saved as “Mobile” in the downloaded Contacts.
e.g.) Call “John Smith” on Mobile
●Call at
WorkYou can call a person directly to the number
that is saved as “Work” in the downloaded Contacts.
e.g.) Call “John Smith” at Work
●Call at
HomeYou can call a person directly to the number
that is saved as “Home” in the downloaded Contacts.
e.g.) Call “John Smith” at Home
●Call on
OtherYou can call a person directly to the number
that is saved as other than “Mobile, Home, or Work” in
the downloaded Contacts.
e.g.) Call “John Smith” on Other
●Dial Number
Displays a screen where you can say a phone number
to dial.
●Dial You can directly say the number to call.
e.g.) Dial 111 555 1234
●Redial
Directly calls at the number that you last dialed.
●Call HistoryDisplays your Call History, where you can say the list
number to make a call.
)@"&
)&7
@(<64"@&6>"7/@23(JOEE



7
@(<64"@&6>"7/@23(JOEE


 


ß
1
 

41
Media Commands
* Check the following before you use media commands.
1.
If no media is connected or if no playable files exist at the time when you use these
commands, a voice message will tell you that this is not available.
2. If you say the name of the media that is currently playing again, then that media will continue playing.
e.g.) Saying “USB” while USB content is playing.
Command Operation
●MusicContinues the last media you played.
●iPodPlays the iPod currently connected. This will work the
same when an iPhone is connected. If a USB is con-
nected, then it will be played instead of the iPod.
●USBPlays the music on the USB currently connected.
If an iPod is connected, then the iPod will be played
instead of the USB.
●Bluetooth AudioPlays the music on the Bluetooth phone currently con-
nected.
This may not be supported depending on the Bluetooth
connection status.
●AUX
Plays external devices that are currently connected.
●My Music Plays My Music files stored in the system.
1. USB Music/iPod/My Music Command
Command Operation
○PlayPlays a selected file.
Maintains the current settings during playback.
○PausePauses a file that is playing.
Maintains current settings while paused during playback.
○ShufflePlays files randomly.
Maintains current settings during shuffled playback.
○Shuffle OffCancels Shuffle and plays files sequentially.
Maintains current settings during sequential playback.
○RepeatPlays the current file repeatedly.
Maintains the current settings during repeat playback.
○Repeat OffCancels Repeat and plays multiple files.
Maintains current settings during multiple file playback.
2. Bluetooth audio/AUX command
For Bluetooth audio and external devices (AUX), local commands are unavail-
able, including Play, Pause, Repeat and Shuffle.
)@"&
)&7
@(<64"@&6>"7/@23(JOEE



7
@(<64"@&6>"7/@23(JOEE


 


ß
1
 

43
Siri Eyes Free
How to start Siri
If you want to use Siri, you have
to connect your iOS device to
the Multimedia system through
Bluetooth.
(Please check whether your iOS
device supports Siri and turning Siri
On)
Then you can use Siri while pressing
and holding
key on the
steering wheel.
How to use Siri
When you access the Siri screen
while pressing and holding

key on the steering wheel, you can
select
Speak button and then you
can speak what you want. Note that
the Multimedia system only supports
“Phone” related functions. Other
functions will be performed in your
iOS device. If you press voice key
quickly, Siri would re-start. If you hold
down voice key, Siri would be termi-
nated and the screen would go back
to the previous screen. Eyes-Free
mode would be activated automati-
cally while you are driving. When
shifting gears into P or putting the
Parking brake on, Eyes-Free mode
would be deactivated automatically.
Information
Functions and feedbacks from voice
commands via Sir
i are executed in
the iOS device. If the iOS version is
changed, the functions and response
may be different according to the iOS
device and the latest version.
)@"&
)&7
@(<64"@&6>"7/@23(JOEE


 7
@(<64"@&6>"7/@23(JOEE


 


ß
1
 

52
About Pairing Mobile Phones
QI cannot pair my mobile phone. What is the cause?
A Check to see that the mobile phone supports Bluetooth® function. Verify if
Bluetooth on the cell phone is set to OFF. If so, set it to ON. If the cell phone
still can’t be registered, try again after turning Bluetooth off and on, or delete
the device registration on the Multimedia System and cell phone and then
register the cell phone again.
Q
What is the difference between pairing a mobile phone and connecting a mobile phone?
A
Pairing occurs through authenticating the head unit and mobile phone. Mobile phones paired to the head unit can be connected and disconnected \
until the paired mobile phone is deleted from the system. Bluetooth
®
Handsfree features, such as making/answering calls or managing contacts,
are supported only in mobile phones connected with the head unit.
Q
What is a Passkey?
A
A passkey is the password used to authenticate the connection between the head unit and mobile phone. The passkey only needs to be entered
once when pairing the mobile phone for the first time.
The initial passkey is 0000. You can change it with
SETUP ▶
Bluetooth ▶

Bluetooth System Info ▶
Passkey menu options.
FAQ
)@"&
)&7
@(<64"@&6>"7/@23(JOEE


 7
@(<64"@&6>"7/@23(JOEE


 


ß
1
 

53
About Making/Answering Phone Calls
Q
How can I answer a call?
A
When there is an incoming call, a notification pop-up will become displa\
yed. To answer the incoming call, select the
Accept button on the screen or the
key on the steering wheel controls.
To reject the call, select the Reject button on the screen or press the
key on the steering wheel controls.
Q
What should I do if I am talking on the Handsfree but want to switch the call
to the mobile phone?
A
While on a call, press and hold (more than 0.8 seconds) the key
on the steering wheel controls or select the
Use Private button at the bot-
tom of the Phone screen to switch the call to your mobile phone.
)@"&
)&7
@(<64"@&6>"7/@23(JOEE


 7
@(<64"@&6>"7/@23(JOEE


 


ß
1