2017 Hyundai Ioniq Hybrid key

6-22 I Navigation
Intersection
Press the MAPVOICE key. ▶ Select the NaviMenu
in the bottom of right of the screen. ▶

Select the
Intersection to search by inter-
section.
Type 1st Street name, the State, 2nd
Street name.
Select the Set as Destination button to start
guidance.
Coordinates
Press the MAPVOICE key. ▶ Select the NaviMenu
in the bottom of right of the screen. ▶

Select the
Coordinates to search by coor-
dinates.
There are two ways to search by coordi-
nates (D.M.S or Decimal Degrees). After
typing coordinates, select the
Done but-
ton to search.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 

Destination Search I 6-23
06
Select the Set as Destination button to start
guidance.
Favorite Places
Set the route using your favorite places.
Press the
MAPVOICE key. ▶ Select the NaviMenu
in the bottom of right of the screen. ▶

Select the
Destination tab. ▶
Select from
favorite places.
On the button where locations are not reg-
istered, the
icon is displayed. When a
location is registered, the
button disap-
pears and the buttons 1 to 3 are displayed
as your favorite places.
Select the Go Home button then select the
Yes button to set the Favorite ‘Go Home’.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 

Destination Search I 6-25
06
All Routes
When the alternative routes option is
enabled in navigation setting, two routing
options are displayed based on faster time
and shorter distance.
•
Faster Time: Select time-optimized
route, being the fastest roads.

•
Shorter Distance: Select short distance,
irrespective of how fast or slow progress
will be calculated.
Name Description
Display total distance,
travel time. Select the
desired route.
Start GuidanceStart the guidance
with the route.
Route OptionsChange the route
option.
Route InfoYou can check route
information.
Edit RouteEdit the route.
TotalDisplay total distance
of the route.
Freeway Display length of
freeway on the route.
Toll Road Display length of toll
road on the route.
FerryDisplay length of
Ferry route on the
route.
The route will be calculated using the
option “Faster Time” by default.
Alternative routes can be suggested if
necessary,
SETUP key
▶
Navigation icon ▶

Route ▶
Alternative: ON
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 

Route Search I 6-29
06
Route Search
Canceling Route
Cancel the route.
Press the MAPVOICE key. ▶ Select the NaviMenu
in the bottom of right of the screen. ▶
Select
the
Route tab. ▶
Select the Cancel Route
icon.
Select Cancel Route the icon.
Select the Yes button to cancel the route.
Display Route Information
Press the MAPVOICE key. ▶ Select the NaviMenu
in the bottom of right of the screen. ▶

Select the
Route tab. ▶
Select the
Route Info. icon.
Select the Route Info. icon.
Check the information on the map. Select
the desired item to see the map informa-
tion.
Avoiding a road
Click the Avoid Street button to avoid the
street or road.
Check the desired item and select the
Done button to finish.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 

6-30 I Navigation
Route Overview
Check the information on route including
the distance, estimated time, toll fees, etc.
Press the
MAPVOICE key. ▶ Select the NaviMenu
in the bottom of right of the screen. ▶

Select the
Route tab. ▶
Select the
Route Overview icon.
Select the Route Overview icon.
Name Description
Route OptionsChange the search
option.
Route InfoYou can check route
information.
Edit RouteEdit the current route.
Route Preview
Check the detailed turn-by-turn list.
Press the MAPVOICE key. ▶ Select the NaviMenu
in the bottom of right of the screen.
▶
Select the
Route tab. ▶
Select the
Route Preview icon.
Select the Route Preview icon.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 

Route Search I 6-31
06
NameDescription
Departure
Place Move to the departure
location.
Previous
Move to the previous
maneuver.
Forward Move to the next
maneuver.
DestinationMove to the destina-
tion location.

Section
Displaying Bar Touch bar to move to
the specific position.
Close the route pre-
view.
Editing Route
Edit the current route.
Press the MAPVOICE key.
▶ Select the NaviMenu
in the bottom of right of the screen.
▶
Select the
Route tab. ▶
Select the
Edit Route icon.
Select the Edit Route icon.
Name Description
Display the selected
point on the map
screen.
Move the selected
item up.
Move the selected
item down.
Delete the selected
item.
DonePress the button to
finish editing.
Add WaypointPress the button to
add an waypoint.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 

6-32 I Navigation
Add the waypoint through various search-
ing methods.
Route Options
Press the MAPVOICE key. ▶ Select the NaviMenu
in the bottom of right of the screen.
▶
Select the
Route tab. ▶
Select the
Route Options icon.

Select the Route Options icon.
Determine the route options to guide the
route.
Avoid Stre et
Search new route by avoiding the selected
street(s).
Press the
MAPVOICE key. ▶ Select the NaviMenu
in the bottom of right of the screen. ▶

Select the
Route tab. ▶
Select the
Avoid Street icon.
Select the Avoid Street icon.
Select the Done to plan new route after
selecting the street(s) that you want to avoid.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 

7-2 I Voice Recognition
What is Voice Recognition?
The voice recognition feature operates the
multimedia system by recognizing voice
commands and enables hands-free oper-
ation of the system while you are driving
your car.
Not all possible voice commands are
recognized by the system due to techno-
logical limitations. To make up for these
limitations, the system displays the voice
commands that are available for you to
use.
There are errors in communication between
people. Likewise, voice recognition some-
times misunderstands your voice command
in some circumstances. If this happens,
either check the screen for the available
options and say the command again, or
manually select and press the button for the
corresponding command on the screen.
Precautions Required
for Successful Voice
Recognition
1. Voice recognition supports only the
commands that are displayed on the
screen and written in the User's Guide.
2. To ensure the correct recognition and
execution of your command, say your
command when you hear the beep after
a voice prompt.
3. Voice recognition automatically ends if:
1) A call is incoming or outgoing
2) A media device (USB or iPod, etc.) is
connected or disconnected
3) The rear view camera is operated
4) The car engine starts or stops
5) A system key, such as
RADIO key
or
MEDIA key is selected
6) An emergency occurs, for example
re-searching for the route after the
navigation route has been lost 4.
The microphone used for the voice
recognition system is located in the
headliner directly above the driver's
head. To make your commands better
understood, keep your body straight
in the driver's seat when speaking the
command.
5. Speaking naturally and clearly will
ensure better recognition of your voice
commands.
6. In the following cases voice recognition
will be affected by ambient noise.
1) The sound of the wind if any window
or the sun roof is open.
2) High speed blower from the air vents.
Set climate control to blow lower
than level 3.
3) Vibrations from passing through a
tunnel.
4) Vibrations from driving on an uneven
road.
5) Storms and heavy rain.
Voice Recognition
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE