2017 Hyundai Ioniq Hybrid phone

Starting the System for the First Time I 1-9
01
Starting the System for the
First Time
Turning the System On/Off
Press the engine start button or set the
ignition key to On or ACC. Each time you
turn on the system, a boot logo and safety
warning will appear.
Pressing the power key on the head unit
will display the user confirm screen. To
change the system language between
English, French, Spanish and Korean
select the Change
Language button.
NOTICE
You cannot operate the system while it is
booting up. It may take some time for all of
features of the system, particularly the voice
recognition system, to be ready for use.
Pressing and holding the power key on the
head unit will turn off the system.
You can change Screen Saver Settings
in Setup to display a clock on the Screen
Saver.
Information

If you turn off the system during a phone call
using the Hands-free feature, then the call will
automatically switch to your mobile phone.
NOTICE
Check the volume when turning on the
system. Before turning on the system, adjust
the volume to a reasonable level.
System Reset
The System Reset function restores the
system when it is not operating correctly.
Press and hold the RESET
key for a sec-
ond or longer. (It is recommended that you
press the RESET
key using a tool, such as
a pin or a clip.)
NOTICE
Resetting the system restores all existing
settings and configurations (e.g. volume,
display, etc.) back to their factory defaults.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


)@"&
)&7
@(<64"@&6>"7/@1"35JOEE





ß
1



ß
1


Starting the System for the First Time I 1-11
01
Features Description
Navigation
Widget •Provides a brief view of the navigation map
and the route screen.
•Touch any area on the screen to move to the
navigation screen.
AV Widget
•Shows brief information on the radio media
current playing.
•Touch the area to move to the mode for what
you are listening to.
Hybrid
Move to the Hybrid information screen.
All Menus
Shows all of the items in the system menu.
My Menu •You can add and save up to eight menu items. •Add your favorite menu items to have quick
and easy access to them.
Home Screen
Controls Menu Confi guration for the Home Screen
Information Display on the Status Bar
Displays the date and time, along with the system status shown by
the various icons to the right of the clock.
The icons in the following table indicate the various types of sys-
tem status details and events.
Information
Received signal strength indicator of Blue Link and 2G/3G/Wi-Fi/LTE
information are displayed only in the devices that support the telematics system.
AV-MuteNavigation-
MuteMaking a call and Bluetooth connection2G/3G/
Wi-Fi/LTE
ICON
DescriptionMute AV
soundMute
Navigation
soundBluetooth
phone
remaining
batteryHandsfree
connectionMaking a
call using
Bluetooth
phoneBluetooth
phone
reception
sensitivityWi-Fi is con-
nected
ICON
DescriptionConnecting to
music streamBlue Link
received
signal
strength
indicationConnecting
to Wi-Fi
ICON
DescriptionHandsfree+
streaming
connectionMute
Bluetooth
phone
micro-
phone
2G/3G data
connection
(displayed
only when
connected to
a 2G/3G data
network)
ICON
DescriptionDownloading
contacts/
recent calls
LTE data
connection
(displayed
only when
connected
to a LTE data
network)
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


)@"&
)&7
@(<64"@&6>"7/@1"35JOEE





ß
1



ß
1


3-12 I AV
The device may not operate normally if MP3 Players, cellu-
lar phones, digital cameras, or other electronic devices (USB
devices not recognized as portable disk drives) are connected
with the device.
Charging through the USB may not work for some mobile
devices.
The device may not support normal operation when using a USB
memory type besides Metal Cover Type USB Memory.
The device may not support normal operation when using for-
mats such as HDD Type, CF, or SD Memory.
When playing iPods, please use a dedicated iPod car cable.
Normal operation cannot be guaranteed when other cables are
being used.
The device will not support files locked by DRM (Digital Rights
Management).
USB memory sticks used by connecting an Adaptor (SD Type or
CF Type) may not be properly recognized.
Only use Plug type connector products, as shown in the figure
below.
To play USB MP3, the USB device must be connected to the
USB port in the front multibox. The USB port in the center con-
sole storage (if equipped) is for charging only.
Plug Type Connector
Product Name Manufacturer
XTICK LG
BMK BMK Technology
SKY-DRV Sky Digital
TRANSCEND JetFlash Transcend
Sandisk Cruzer SanDisk
Micro ZyRUS ZyRUS
NEXTIK Digiworks
Information

Problems that occur through use of USB devices not listed within the
above table are not covered by the product warranty.

)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


)@"&
)&7
@(<64"@&6>"7/@1"35JOEE





ß
1



ß
1


iPod I 3-19
03
iPod
Using iPod Devices
iPod is a registered trademark of Apple Inc.
iPod mode will not operate if the con-
nected iPod cannot be recognized due
to operation of unsupported versions
that do not support related protocols,
iPod abnormalities, or iPod device
defects. Some iPods with unsupported
communication protocols may not prop-
erly operate with the Multimedia system.
For fifth generation iPod Nano devices,
the iPod may not be recognized when
the battery level is low. Please charge
the iPod for use.
Search/play orders shown within the
iPod device may differ with the orders
shown within the Multimedia system.
If the iPod malfunctions due to an iPod
device defect, reset the iPod and try
again. (To learn more, refer to your iPod
manual.) If repeatedly connect and disconnect
iPod/iPhone to the Multimedia system
with USB cable in a short time, it may
cause abnormal operation.
The time for recognition of iPod/iPhone
may vary depending on device type,
firmware version and iOS version.
For some iPod Touch and iPhone
devices, connecting Bluetooth
® while the
iPod is operating may result in discon-
tinued iPod sound. When such devices
with Bluetooth
® support are connected,
this problem occurs as the sound source
is changed from the Dock Connector
(USB connector cable) to Bluetooth.
To prevent this symptom, Bluetooth
Audio function in the Multimedia system
is limited if iPod/iPhone is connected
to the system through both cable and
Bluetooth. To listen to the iPod sound,
use either iPod menu with USB connec-
tion or Bluetooth Audio with Bluetooth
connection. To listen to the iPod sound, reconnect
the USB cable or change the audio out-
put settings in iPod/iPhone to Dock.
In order to use the iPod while operating
the keys, you must use a dedicated iPod
cable. (the cable that is supplied when
purchasing iPod/ iPhone products)
※ During ACC ON state, connecting the
iPod through the iPod cable (The cable
that is supplied when purchasing iPod/
iPhone product.) will charge the iPod
through the head unit.
※ she use of genuine iood cables supLThe use of genuine iPod cables supL
plied by Apple is recommendedM (she plied by Apple is recommended. (The
use of other products may result in use of other products may result in
noise or abnormal operationM)noise or abnormal operation.)
※ To play iPod music through cable con-
nection, the iPod/USB cable must be
connected to the USB port in the front
multibox. The USB port in the center
console storage (if equipped) is for
charging only.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


)@"&
)&7
@(<64"@&6>"7/@1"35JOEE





ß
1



ß
1


3-20 I AV
When connecting with the iPod cable,
make sure to fully insert the jack to pre-
vent communication interference. If the
iPod is connected to the vehicle while it
is playing, a high pitch tone may sound
for about 1~2 seconds immediately after
connection. If possible, connect the iPod
to the vehicle with the iPod stopped/
paused.
Within iPhones, streaming audio and
iPod control may occasionally conflict.
If problems persist, remove the iPhone
and connect again.
When connecting to iPod Nano /Classic,
the HYUNDAI Motor logo appears on
the Apple device. For the iPod Nano 6
generation, however, the logo image
does not appear since it is not sup-
ported. Also, all iPhone and iPod Touch
products do not support this function. In Apple’s iOS 6.0 version or later,
Podcast and Audiobook media files
are designed to be played with the
Podcasts and iBooks applications spe-
cifically designed for Apple products. If
the Apple device does not provide the
Podcast and Audiobook lists, the playlist
may not be displayed and played in the
Multimedia System iPod mode.
If the Apple Podcasts and iBooks apps
are not installed on the Apple device, but
the Apple device provides the Podcast
and Audiobook lists, you can play files in
other categories in Multimedia System
iPod mode.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


)@"&
)&7
@(<64"@&6>"7/@1"35JOEE





ß
1



ß
1


iPod I 3-21
03
Caution
While using a connected iPhone/iPod
Touch device, it may not operate nor-
mally if the user changed some func-
tions in the device.
When calling with an iPhone connec-
tion, song may stop playing due to an
Apple device feature. If sound does
not resume after the call is terminated,
check the device status.
If lots of songs have the same informa-
tion, skipping may occur when previous/
next song is executed due to an Apple
device feature. Also problems may
occur depending on device type or iOS
version.
If lots of songs have the same informa-
tion, the song that plays may be differ-
ent between the system and the Apple
device. Reset the device or delete the
same songs in the Apple device using
iTunes. If you control pause, repeat, shuffle, or
seek songs when the play time is less
than 3s before the song is finished play-
ing, it may occur difference of playing
song between the Multimedia system
and Apple device. Access to iPod music
from another mode or pause a song and
then play a song again in Apple device. We recommend that your Apple device
uses the latest firmware since some
problems may occur due to an outdated
firmware or other software related
issues.
Type 1G 2G 3G 4G 5G 6G 6.5G 7G
iPod Mini Not Supported
iPod Shuffle Not Supported
iPod Nano
○ ○○○ ○ ○Not
released○
iPod Touch○(iOS 1.1 not
supported)○○○ ○Not released
iPad
○
(Unable to charge, Not verified, Normal working not guaranteed)
iPad Mini
○
(Unable to charge, Not verified, Normal working not guaranteed)
iPod Classic Not Supported
○(iPod with
Video)○(iPod
Classic)○(iPod
Classic)Not
released
Type 3G 3GS 4G 4GS 5G
iPhoneNot verified,
Normal working not guaranteed
○○○○
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


)@"&
)&7
@(<64"@&6>"7/@1"35JOEE





ß
1



ß
1


3-22 I AV
Caution
If the iPhone/iPod Touch supports
Bluetooth, the Apple device will not be
able to use the Bluetooth function if the
device is connected through both the
USB port and via Bluetooth. Disconnect
the USB connection then use Bluetooth
Audio
If iPod/iPhone connected to the
Multimedia system through both USB
and AUX. iPod/iPhone keeps output
sound via AUX, thus it may occur sound
will not output in iPod mode.
If AUX cable connected to iPod/iPhone
but not connect to the Multimedia sys-
tem, it may occur sound will not output
in iPod mode due to iPod/iPhone’s fea-
ture. Especially, if you use AUX cable
like pictures, this problem may occur.
Disconnect AUX cable from iPod/iPhone
first, then connect to the Multimedia
system via USB. Or change settings to
“Dock” in iPod/iPhone. If connect to the Multimedia system
while podcast or iTunes music down-
loading to iPod/iPhone, it may occur
some problems when you select song
in the list. Reconnect iPod/iPhone to the
Multimedia system when downloading
is finished or the file deleted.
If connect to the Multimedia system
while sync, it may occur some problems.
Try to use iPod/iPhone connection after
sync complete. (To learn more, refer to
your iPod manual.)
iPhone and iPod Touch devices are
guaranteed to work normally on iOS
7.0.6 or below. However, they may not
work normally on future iOS versions
as their operations have not yet been
tested.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


)@"&
)&7
@(<64"@&6>"7/@1"35JOEE





ß
1



ß
1


Bluetooth® Audio I 3-27
03
Features Description
Mode
Displays the current operating mode.
Phone Name
Displays name of connected phone.
Artist Info
Name of current artist.
Title
Name of current song.
Previous File If play time is less than 3 seconds, moves to
the previous file.
If play time is more than 3 seconds, plays the
current file from the beginning.
This function may differ depending on the
model of mobile phone.
Play/Pause
Plays/Pauses Bluetooth Audio.
Next File
Moves to the next file.
RepeatRepeats the current file. This function may differ depending on the
model of mobile phone.
ShufflePlays files in random order. This function may differ depending on the
model of mobile phone.
ConnectionsMoves to the Bluetooth Settings screen. You
can pair a new device or change/delete paired
device(s).
SEEK/TRACK
Plays the previous/next file.
TUNE TUNE is not supported.
Information
Artist info and Title may not be supported by mobile phone.
Bluetooth® Audio
Bluetooth Audio Mode Display Controls
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


)@"&
)&7
@(<64"@&6>"7/@1"35JOEE





ß
1



ß
1