2017 Hyundai Ioniq Hybrid key

SiriusXM™ I 3-7
03
Features Description
Play Live
Plays live broadcast mode.
Skip BackwardRepeats the previously broadcasted program.
Holding for less than 0.8 seconds: Moves to
the previous segment
Holding for more than 0.8 seconds: Moves to
the previous 5 seconds
Play Pause
Pauses/plays the current broadcasting program.
Skip ForwardMoves to the next segment.
ListDisplays SiriusXM™ Radio Categories/Channel
Lists
MenuWhat’s on My Preset?
The program schedule saved in my preset. (For
more details, see Section 3.8. Viewing Menu.)
Featured Favorite
Theme channels recommended by SiriusXM™.
(For more details, see Section 3.8. Viewing
Menu.)
Preset Scan
Plays preset frequencies for 5 seconds each.
SEEK/TRACK
When pressed quickly (less than 0.8 seconds), Plays the previous/next channel When pressed and held (more than 0.8 seconds), Continuously changes the channel until the key
is released and plays the current channel
TUNE
Changes the channel
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


)@"&
)&7
@(<64"@&6>"7/@1"35JOEE





ß
1



ß
1


3-8 I AV
Selecting through
Channel/Category List
Select the List ▶
Select the desired cat-
egory and channel.
Select the desired category and the chan-
nel. Once selected, the previous screen
will be restored and the selected channel
will begin playing.
If you select the Skip button, you can
scan channels using the
SEEK , TRACK
key or the TUNE
knob by skipping the
channels that you chose to skip.
Direct Tune
Enter the number of the channel you want
to receive.
Viewing Menu
Using the Menu button on the right, you
can view the program schedule and infor-
mation about the Featured Favorites pro-
vided by SiriusXM™.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


)@"&
)&7
@(<64"@&6>"7/@1"35JOEE





ß
1



ß
1


iPod I 3-19
03
iPod
Using iPod Devices
iPod is a registered trademark of Apple Inc.
iPod mode will not operate if the con-
nected iPod cannot be recognized due
to operation of unsupported versions
that do not support related protocols,
iPod abnormalities, or iPod device
defects. Some iPods with unsupported
communication protocols may not prop-
erly operate with the Multimedia system.
For fifth generation iPod Nano devices,
the iPod may not be recognized when
the battery level is low. Please charge
the iPod for use.
Search/play orders shown within the
iPod device may differ with the orders
shown within the Multimedia system.
If the iPod malfunctions due to an iPod
device defect, reset the iPod and try
again. (To learn more, refer to your iPod
manual.) If repeatedly connect and disconnect
iPod/iPhone to the Multimedia system
with USB cable in a short time, it may
cause abnormal operation.
The time for recognition of iPod/iPhone
may vary depending on device type,
firmware version and iOS version.
For some iPod Touch and iPhone
devices, connecting Bluetooth
® while the
iPod is operating may result in discon-
tinued iPod sound. When such devices
with Bluetooth
® support are connected,
this problem occurs as the sound source
is changed from the Dock Connector
(USB connector cable) to Bluetooth.
To prevent this symptom, Bluetooth
Audio function in the Multimedia system
is limited if iPod/iPhone is connected
to the system through both cable and
Bluetooth. To listen to the iPod sound,
use either iPod menu with USB connec-
tion or Bluetooth Audio with Bluetooth
connection. To listen to the iPod sound, reconnect
the USB cable or change the audio out-
put settings in iPod/iPhone to Dock.
In order to use the iPod while operating
the keys, you must use a dedicated iPod
cable. (the cable that is supplied when
purchasing iPod/ iPhone products)
※ During ACC ON state, connecting the
iPod through the iPod cable (The cable
that is supplied when purchasing iPod/
iPhone product.) will charge the iPod
through the head unit.
※ she use of genuine iood cables supLThe use of genuine iPod cables supL
plied by Apple is recommendedM (she plied by Apple is recommended. (The
use of other products may result in use of other products may result in
noise or abnormal operationM)noise or abnormal operation.)
※ To play iPod music through cable con-
nection, the iPod/USB cable must be
connected to the USB port in the front
multibox. The USB port in the center
console storage (if equipped) is for
charging only.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


)@"&
)&7
@(<64"@&6>"7/@1"35JOEE





ß
1



ß
1


3-26 I AV
AUX
Connecting an External Device
If an external device connector is connected with the AUX termi-
nal, then AUX mode will automatically operate. Once the connec-
tor is disconnected, the previous mode will be restored.
AUX mode can be used only when an external audio player has
been connected.
The AUX volume can also be controlled separately through the
connected device.
Information
SEEK , TRACK key, TUNE
is not supported.
NOTICE
If only a cable is connected to the AUX without an external device, the
mode will be changed to AUX, but noise may occur. When an external
device is not being used, remove the connector jack.
When the external device power is connected to the power jack, playing
the external device may output noise. In such cases, disconnect the
power connection before use.
※
The actual feature in the vehicle may differ from the illustration.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


)@"&
)&7
@(<64"@&6>"7/@1"35JOEE





ß
1



ß
1


4-4 I Bluetooth
Bluetooth Connection
Pairing a New Device
Before you can use the Bluetooth feature,
you must first pair/connect your mobile
phone to your car.
Up to 5 Bluetooth devices can be paired.
Only one Bluetooth device can be con-
nected at a time.
Pairing a New Device by Selecting
Phone/Call
Press the PHONE key or key in
the steering wheel control. ▶
Pair your car
after your mobile phone detects the
Bluetooth device. ▶
Enter the passkey or
accept the authorization popup. ▶

Connect Bluetooth.
Pairing a New Device Through the
Phone Settings
Press the SETUP key. ▶ Select Bluetooth.
▶
Select
Bluetooth Connection. ▶
Select
Add New. ▶
Pair your car after your
mobile phone detects the Bluetooth
device. ▶
Enter the passkey or accept
the authorization popup. ▶
Connect
Bluetooth.
The default passkey is 0000.
The Vehicle Name above is an exam-
ple. Check the actual information on the
product.
Connecting Bluetooth Devices
Connects the Bluetooth devices that you
add.
Connecting Devices by Selecting
Phone/Call
Press the PHONE key or key in
the steering wheel control. ▶
Select the
name of the device to connect. ▶
Connect
Bluetooth.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


)@"&
)&7
@(<64"@&6>"7/@1"35JOEE





ß
1



ß
1


Bluetooth Connection I 4-5
04
Connecting Devices Through the
Phone Settings
Press the SETUP key. ▶ Select Bluetooth.
▶
Select Bluetooth Connection. ▶
Select the
name of the device to connect. ▶

Connect Bluetooth.
Disconnecting
Bluetooth Devices
Disconnects Bluetooth devices that are
connected.
Press the SETUP key. ▶ Select Bluetooth.
▶
Select Bluetooth Connection. ▶
Select the
name of the device to disconnect.
Deleting Bluetooth Devices
Deletes the Bluetooth devices that you
added. Note that deleting a Bluetooth
device will delete all Call History and
Contact Info downloaded along with it.
Press the SETUP key. ▶ Select Bluetooth.
▶
Select
Bluetooth Connection. ▶
Select
Delete Devices. ▶
Select the device name
to delete. ▶
Select
Delete.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


)@"&
)&7
@(<64"@&6>"7/@1"35JOEE





ß
1



ß
1


Bluetooth Phone I 4-7
04
Dial
Dials a call after the Bluetooth devices are
connected.
Press the
PHONE key, and then Dial.
Name Description
KeypadUse the keypad to
enter the phone num-
ber that you want to
call. Press and hold
the last number of
a speed dial to dial
a number that you
added to the Speed
Dial list in the phone
DeleteDeletes the numbers
that you entered.
SettingsMoves to a screen of
Phone Settings.
CallMakes a call after
you dial a number
and select CALL. If
the number is listed
in Dialed Calls, you
can select the number
and press CALL to
automatically dial that
number again.
Information
Some types of mobile phones may not
support the Speed Dial function.
Accept/Reject Call
If there is an incoming call after you made
a Bluetooth connection, a popup message
will appear.
Name Description
Accept
Answers the call.
Reject
Ignores the call.
Information
In some mobile phones, the caller's number
may not be displayed, and the Reject feature
may not be supported.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


)@"&
)&7
@(<64"@&6>"7/@1"35JOEE





ß
1



ß
1


4-8 I Bluetooth
Using the Menu During
a Phone Call
When making a call, you can use the fol-
lowing menu items.
Name Description
Use PrivateSwitches a voice call
from the car Hands-free
to the mobile phone.
End
Ends a call.
Contacts Displays the Contacts
list.

Outgoing
VolumeDisplays the Mic Volume
settings. You can adjust
the in-call volume that
the other party hears
(level 1 - 5).
KeypadMoves to a screen for
entering ARS numbers.
SwitchSwitches to a call on
hold, if any. You can also
switch calls by select-
ing the number in the
Information Display. The
Switch function switches
the current call to a
waiting call in order to
answer a new incoming
call.
Information
If the caller's number is listed in Contacts, the
caller's name will be displayed. Otherwise,
only the number will be displayed. In some
mobile phones, the phone number may not
be displayed.
In some Bluetooth devices, the Use Private
feature may not be supported.
In some Bluetooth devices, the Switch feature
may not be supported.
During a phone call on a Bluetooth Hands-
free, you cannot access other modes, such as
Radio and Setup.
Depending on handset types, the in-call
volume the other party hears may differ. If the
other party hears your voice too low or too
loud, adjust the mic volume.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


)@"&
)&7
@(<64"@&6>"7/@1"35JOEE





ß
1



ß
1