2017 Hyundai Ioniq Hybrid USB port

7-2 I Voice Recognition
What is Voice Recognition?
The voice recognition feature operates the
multimedia system by recognizing voice
commands and enables hands-free oper-
ation of the system while you are driving
your car.
Not all possible voice commands are
recognized by the system due to techno-
logical limitations. To make up for these
limitations, the system displays the voice
commands that are available for you to
use.
There are errors in communication between
people. Likewise, voice recognition some-
times misunderstands your voice command
in some circumstances. If this happens,
either check the screen for the available
options and say the command again, or
manually select and press the button for the
corresponding command on the screen.
Precautions Required
for Successful Voice
Recognition
1. Voice recognition supports only the
commands that are displayed on the
screen and written in the User's Guide.
2. To ensure the correct recognition and
execution of your command, say your
command when you hear the beep after
a voice prompt.
3. Voice recognition automatically ends if:
1) A call is incoming or outgoing
2) A media device (USB or iPod, etc.) is
connected or disconnected
3) The rear view camera is operated
4) The car engine starts or stops
5) A system key, such as
RADIO key
or
MEDIA key is selected
6) An emergency occurs, for example
re-searching for the route after the
navigation route has been lost 4.
The microphone used for the voice
recognition system is located in the
headliner directly above the driver's
head. To make your commands better
understood, keep your body straight
in the driver's seat when speaking the
command.
5. Speaking naturally and clearly will
ensure better recognition of your voice
commands.
6. In the following cases voice recognition
will be affected by ambient noise.
1) The sound of the wind if any window
or the sun roof is open.
2) High speed blower from the air vents.
Set climate control to blow lower
than level 3.
3) Vibrations from passing through a
tunnel.
4) Vibrations from driving on an uneven
road.
5) Storms and heavy rain.
Voice Recognition
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 

7-12 I Voice Recognition
Media Commands
* Check the following before you use media commands.
1. If no media is connected or if no playable files exist at the time when you use these commands, a voice message will tell you
that this is not available.
2. If you say the name of the media that is currently playing again, then that media will continue playing.
e.g.) Saying “USB” while USB content is playing.
Command Operation
●MusicContinues the last media you played.
●iPodPlays the iPod currently connected. This
will work the same when an iPhone is con-
nected. If a USB is connected, then it will
be played instead of the iPod.
●USBPlays the music on the USB currently con-
nected.
If an iPod is connected, then the iPod will
be played instead of the USB.
●Bluetooth AudioPlays the music on the Bluetooth phone
currently connected.
This may not be supported depending on
the Bluetooth connection status.
●AUX
Plays external devices that are currently
connected.
●My Music Plays My Music files stored in the system.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE





11-6 I Appendix
Problem Possible Cause Countermeasure
The USB
does not
work
• USB memory is
damaged

• USB memory has
been contaminated

• A separately pur-
chased USB HUB is
being used

• A USB extension
cable is being used

• A USB which is not
a Metal Cover Type
USB Memory is
being used

• An HDD type, CF,
SD Memory is being
used

• There are no music
files which can be
played
• Please use the USB after
formatting it.

• Remove any foreign sub-
stances on the contact sur-
face of the USB memory and
multimedia terminal

• Directly connect the USB
memory with the multimedia
terminal on the vehicle

• Directly connect the USB
memory with the multimedia
terminal on the vehicle

• Use standard USB Memory

• Use standard USB Memory

• Only MP3, WMA file formats
are supported. Please use
only the supported music file
formats
The iPod is
not recog-
nized even
though it has
been con-
nected
• There are no titles
which can be played

• The iPod firmware
version has not
been properly
updated

• The iPod device
does not recognize
downloads

• Use iTunes to download and
save MP3 files into the iPod

• Use iTunes to update the firm-
ware version and reconnect
the iPod with the device

• Reset the iPod and reconnect
with the device
Problem Possible Cause Countermeasure
Bluetooth
does not
work or its
limited func-
tions are
available
• Bluetooth on your
mobile phone is set
to OFF

• The Bluetooth con-
nection is not made
• Set it to ON

• Make the connection active
Information
• While operating the device, if an abnormality occurs that cannot be
corrected with the abo
ve described measures, press the
RESET key to
reset the system.
• Press and hold the
RESET key (over 1 second). The device power will
turn off and the system will reset.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 

11-12 I Index
S
Save ……………………………………6-13
Screen Saver Settings ……………… 10-11
Selecting through Channel/
Category List ………………………… 3-8
Send to Car with Google ……………… 5-6
Service Activation ……………………10-8
Setup …………………………………10-2
Siri Eyes Free …………………………7-21
SiriusXM™ …………………………… 3-6
SiriusXM™ Data ……………………… 8-4
SiriusXM™ Display Controls ………… 3-6
SiriusXM™ Fuel Price Information …… 8-6
SiriusXM™ Movie Information ………8-10
SiriusXM™ Sports Information ……… 8-8
SiriusXM™ Stock Information ………… 8-7
SiriusXM™ Traffic Information………… 8-5
SiriusXM™ Weather Announcement … 8-4
Skipping Prompt Messages ………… 7-5
Sound Settings ………………………10-3
Start Screen …………………………… 7-6
Starting Blue Link Voice Local Search 5-8
Starting Hybrid Mode ………………… 2-2
Starting the System for the First Time … 1-9
Starting Voice Recognition …………… 7-3
Starting/Ending and Setting
Voice Recognition …………………… 7-3
Steering-linked camera ……………… 9-2
Steering Wheel Controls ……………… 1-7
Stolen Vehicle Recovery ……………… 5-5
Supported Image Specifications………3-13
Supported USB MP3 music
specifications …………………………3-13
System Info ………………………… 10-11
System Reset ………………………… 1-9
System Update …………………… 10-11
T
Traffic …………………………… 6-9, 6-34
Troubleshooting ……………… 6-35, 11-4
Turn List ………………………………6-13
Turning the System On/Off …………… 1-9
Types of Commands ………………… 7-8
U
USB ……………………………………3-11
USB Image Mode Display Controls …3-17
USB Music Mode Display Controls …3-14
Using iPod Devices ……………………3-19
Using the Menu During a Phone Call … 4-8
V
Vehicle Diagnostics …………………… 5-7
Viewing Menu ………………………… 3-8
Voice Commands …………………… 7-8
Voice Recognition Screen Overview … 7-6
Voice Recognition Settings ……………10-8
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


 )@"&
)&7
@(<64"@&6>"7/@1"35JOEE




22
FeaturesDescription
TUNETurn the

TUNE
knob to search a desired track. If the
desired track is displayed, press the TUNE
knob to play the
track.
If the TUNE
knob is not pressed within 5 seconds of
searching tracks, the track info for the current track is
restored.
NOTICE
For USB media or iPod music, the USB/iPod cable must be plugged in to the USB port
in the front m
ultibox. The USB port in the center storage console is for charging only.
iPod
)@"&
)&7
@(<64"@&6>"7/@23(JOEE


7
@(<64"@&6>"7/@23(JOEE


 


ß
1
 

32
Precautions Required
for Successful Voice
Recognition
1. Voice recognition supports only
the commands that are displayed
on the screen and written in the
User’s Guide.
2. To ensure the correct recognition
and execution of your command,
say your command when you hear
the beep after a voice prompt.
3. Voice recognition automatically
ends if:
1) A call is incoming or outgoing
2) A media device (USB or iPod,
etc.) is connected or discon-
nected
3) The rear view camera is oper-
ated
4) The car engine starts or stops
5) A system key, such as
RADIO
key or
MEDIA key is selected
6) An emergency occurs, for
example re-searching for the
route after the navigation route
has been lost 4.
The microphone used for the
voice recognition system is
located in the headliner directly
above the driver’s head. To make
your commands better under-
stood, keep your body straight in
the driver’s seat when speaking
the command.
5. Speaking naturally and clearly will
ensure better recognition of your
voice commands.
6. In the following cases voice rec-
ognition will be affected by ambi-
ent noise.
1) The sound of the wind if any
window or the sun roof is open.
2) High speed blower from the
air vents. Set climate control to
blow lower than level 3.
3) Vibrations from passing
through a tunnel.
4) Vibrations from driving on an
uneven road.
5) Storms and heavy rain.
Voice Recognition
)@"&
)&7
@(<64"@&6>"7/@23(JOEE


 7
@(<64"@&6>"7/@23(JOEE


 


ß
1
 

41
Media Commands
* Check the following before you use media commands.
1.
If no media is connected or if no playable files exist at the time when you use these
commands, a voice message will tell you that this is not available.
2. If you say the name of the media that is currently playing again, then that media will continue playing.
e.g.) Saying “USB” while USB content is playing.
Command Operation
●MusicContinues the last media you played.
●iPodPlays the iPod currently connected. This will work the
same when an iPhone is connected. If a USB is con-
nected, then it will be played instead of the iPod.
●USBPlays the music on the USB currently connected.
If an iPod is connected, then the iPod will be played
instead of the USB.
●Bluetooth AudioPlays the music on the Bluetooth phone currently con-
nected.
This may not be supported depending on the Bluetooth
connection status.
●AUX
Plays external devices that are currently connected.
●My Music Plays My Music files stored in the system.
1. USB Music/iPod/My Music Command
Command Operation
○PlayPlays a selected file.
Maintains the current settings during playback.
○PausePauses a file that is playing.
Maintains current settings while paused during playback.
○ShufflePlays files randomly.
Maintains current settings during shuffled playback.
○Shuffle OffCancels Shuffle and plays files sequentially.
Maintains current settings during sequential playback.
○RepeatPlays the current file repeatedly.
Maintains the current settings during repeat playback.
○Repeat OffCancels Repeat and plays multiple files.
Maintains current settings during multiple file playback.
2. Bluetooth audio/AUX command
For Bluetooth audio and external devices (AUX), local commands are unavail-
able, including Play, Pause, Repeat and Shuffle.
)@"&
)&7
@(<64"@&6>"7/@23(JOEE



7
@(<64"@&6>"7/@23(JOEE


 


ß
1
 

Android Auto/Apple
CarPlay
This manual applies to all HYUNDAI models
and includes descriptions and explanations
of optional as well as standard equipment.
As a result, you may find material in this
manual that does not apply to your specific
vehicle.
What is Android Auto/
Apple CarPlay?
You can securely access your smartphone
while driving by using this feature. Various
functions on your smart phone are dis-
played on the multimedia system so you
can easily use them (finding the direction,
making a call, listening to music, etc.).
With Android Auto or Apple CarPlay con-
nected, Android Auto or Apple CarPlay
appears on the display. Available fuctions
and operations may differ depending on the
company model.
For more information, visit the Google or
Apple website.
- Google: http://support.google.com/
androidauto/
- Apple: http://www.apple.com/ios/carplay/
Precautions
• Android Auto is a registered trademark of Google Inc.
Apple CarPlay is a registered trademark of Apple Inc.
Android Auto or Apple CarPlay is unavail- able if the phone OS is not the latest
version or your phone is unable to be
recognized due to a shutdown caused by
a failure or defect in the device itself. Your phone may not be recognized if its
battery is low. Charge your phone then
try again.
If your phone is shut down due to a defect in the device itself, reset your
phone and try again.
If you repeatedly connect and disconnect the USB cable on the device in a short
period of time, your phone may malfunc-
tion. This can also cause a device failure.
The device recognition time may differ depending on the device type and firm-
ware/OS version.
Using the USB cable that came with the phone is recommended. (Using a
non-genuine product may cause noise or
malfunction.)
Normal operations are not guaranteed when you arbitrarily manipulate your
phone while Android Auto or Apple
CarPlay is active.
)@-'B
.:@(<64"@$"/>"7/@""@$1@(6*%&JOEE


 )@-'B
.:@(<64"@$"/>"7/@""@$1@(6*%&JOEE