Page 6 of 26
Quick Reference Guide I 09
08 I Quick Reference Guide
IONIQ ELECTRIC HYUNDAI HEADLIGHTSHeadlight DelayHeadlights may stay on for 15 seconds after exiting and locking vehicle.
Press the lock button on the smart key twice to turn the headlights off.Turn signals and lane change
signalsFlashing headlights
PULL
High beams
PUSH
NOTE:
To turn off the high beam,
pull the lever towards you.
Parking lights onDRL offAuto headlights onHeadlights on
FEATURES AND CONTROLS
DRIVER'S MAIN CONTROLS
Folding outer side view mirrors Press to fold/unfold mirrors.
Press the lock or unlock button on
the smart key in AUTO position,
and the mirrors will be folded or
unfolded.Outer side view mirror • Press the L or R button. • Adjust the mirror by using
the directional switch.Power window lock buttonDisables the power window
switches on the rear passenger
doors. Door lockLocks/unlocks all doors.Window switches• Front doors power window
switches.• Rear doors power window
switches.
Page 9 of 26
Quick Reference Guide I 15
14 I Quick Reference Guide
IONIQ ELECTRIC HYUNDAI
Standard Programming To train most devices, follow these instructions:
1. For the first-time programming, press and hold the two outside
buttons, HomeLink
® Channel 1 and Channel 3 buttons, until the
indicator light begins to flash (after 10 seconds). Release both
buttons. Do not hold the buttons for over 20 seconds.
2. Position the end of your hand-held transmitter 1-3in. (2-8cm)
away from the HomeLink
® buttons while keeping the indicator
light in view.
3. Simultaneously press and hold both the HomeLink
® and the
hand-held transmitter button. DO NOT release the buttons until
step 4 has been completed.
4. While continuing to hold the buttons, the red indicator Status LED
will flash slowly and then rapidly after HomeLink
® successfully
trains to the frequency signal from the hand-held transmitter.
Release both buttons.
For more detailed information, please refer to your Owner’s Manual, or
visit www.homelink.com or call (800) 355-3515.
HOMELINK WIRELESS CONTROL SYSTEM
SEAT WARMER (Front seat)
Each time you push the button,
the setting is changed as follows:OFFMIDDLE HIGH
LOW
FEATURES AND CONTROLS
WIRELESS CELLULAR PHONE CHARGING SYSTEM
If you want to turn it off immediately,
press and hold the button.There is a wireless cellular phone
charging system in front of the cup
holders. The system operates with
all doors closed, and the Engine
Start/Stop button in the ACC/ON/
START position. Wireless charging
system can be disabled in the
instrument cluster settings menu.
NOTE:The wireless cellular phone charging system supports only the
Qi-enabled cellular phones (
).
NOTE:
Do not place any metallic items such as coins, keys on the
charger. Avoid placing credit cards on the charger as they may be
damaged by the magnetic field.
The charging area may be warm while using wireless charging.
Page 11 of 26
Quick Reference Guide I 19
18 I Quick Reference Guide
IONIQ ELECTRIC HYUNDAI
1 ECO guide2 Speedometer3 Warning and indicator lights4 LCD display (including Trip computer)5 Battery SOC (State of Charge) gauge
3
4
1
2
5
FEATURES AND CONTROLS
WARNINGS AND INDICATORSReady indicator
Service warning
light
Power down warning
lightAir bag warning lightElectric Power Steering
(EPS) warning light
Electronic Brake force
Distribution (EBD)
System warning light
Charging indicator
TPMS Malfunction /
Low tire pressure
warning light
AUTO HOLD indicator
Autonomous
Emergency Braking
(AEB) warning lightLane Departure
Warning System
(LDWS) Indicator
LED headlamp
warning light
Charging system
warning light
(for 12-volt battery)Anti-lock Brake
System (ABS)
warning light
Electic Parking Brake
(EPB) warning light
Parking brake &
brake fluid warning
light
Seat belt
warning light
Turn signal indicator
light
Immobilizer indicator
Master warning light
Electronic Stability
Control (ESC) OFF
indicator light
Electronic Stability
Control (ESC)
Indicator LightLight ON indicator
light
ECO mode indicatorCruise indicator
Adaptive Front Lighting
System (AFLS) warning
lightHigh beam indicator
lightCruise SET indicator
SPORT mode
indicator
INSTRUMENT CLUSTER
High voltage battery
low level warning
light
Page 25 of 26
Quick Reference Guide I 47
46 I Quick Reference Guide
IONIQ ELECTRIC HYUNDAI
DRIVING
AUTONOMOUS EMERGENCY BRAKING (AEB)
The Autonomous Emergency Braking (AEB)
system is designed to detect and monitor the
vehicle ahead or detect a pedestrian in the
roadway through radar signals and camera
recognition to warn the driver that a collision is
imminent, and if necessary, apply emergency
braking.
To activate the system,
Select “User Settings
Driving Assist
Autonomous Emergency Braking”
The system deactivates, when the system
setting is cancelled.
1 To turn on/off the cruise control.2 To resume or increase the cruise
control speed.3 To set or decrease the cruise
control speed.4 To cancel the cruise control. The Cruise Control system allows you to
program the vehicle to maintain a
constant speed without depressing the
accelerator pedal.
If your vehicle is equipped with Advanced Smart Cruise Control and you
wish to eliminate the vehicle distance function, you can change cruise control
setting to a standard setting. Press the Cruise Control button on the steering
wheel to turn on the Cruise Control. Then press and hold the vehicle distance
button for more than 2 seconds to toggle between the Smart Cruise Control
(SCC) and Cruise Control (CC) mode. Please refer to your Owner’s Manual for
more information.
CRUISE CONTROL / SMART CRUISE CONTROL
Setting Vehicle Distance (Smart
Cruise Control only)This system allows you to program
the vehicle to maintain constant
speed and distance without
depressing the accelerator or brake
pedal.
The vehicle to vehicle distance
1 will
automatically activate when you set
the cruise speed
2.
Each time the vehicle distance set
button is pressed, the vehicle to
vehicle distance changes as
following:
2
1
Distance 2 Distance 3 Distance 4
(Longest)
Distance 1(Shortest)
2341
