Quick Reference Guide I 19
18 I Quick Reference Guide
IONIQ ELECTRIC HYUNDAI
1 ECO guide2 Speedometer3 Warning and indicator lights4 LCD display (including Trip computer)5 Battery SOC (State of Charge) gauge
3
4
1
2
5
FEATURES AND CONTROLS
WARNINGS AND INDICATORSReady indicator
Service warning
light
Power down warning
lightAir bag warning lightElectric Power Steering
(EPS) warning light
Electronic Brake force
Distribution (EBD)
System warning light
Charging indicator
TPMS Malfunction /
Low tire pressure
warning light
AUTO HOLD indicator
Autonomous
Emergency Braking
(AEB) warning lightLane Departure
Warning System
(LDWS) Indicator
LED headlamp
warning light
Charging system
warning light
(for 12-volt battery)Anti-lock Brake
System (ABS)
warning light
Electic Parking Brake
(EPB) warning light
Parking brake &
brake fluid warning
light
Seat belt
warning light
Turn signal indicator
light
Immobilizer indicator
Master warning light
Electronic Stability
Control (ESC) OFF
indicator light
Electronic Stability
Control (ESC)
Indicator LightLight ON indicator
light
ECO mode indicatorCruise indicator
Adaptive Front Lighting
System (AFLS) warning
lightHigh beam indicator
lightCruise SET indicator
SPORT mode
indicator
INSTRUMENT CLUSTER
High voltage battery
low level warning
light
Quick Reference Guide I 45
44 I Quick Reference Guide
IONIQ ELECTRIC HYUNDAI LANE DEPARTURE WARNING SYSTEM (LDWS)
The Lane Departure Warning System
detects the lane on the road and
warns the driver if the vehicle leaves
the lane. The system operates when
the vehicle speed is over 40 mph.
• To turn on the LDWS, press the
LDWS switch.
• To turn off the LDWS, press the
switch again.
2
The BSD (Blind Spot Detection)
system uses a radar sensor to alert
the driver while driving.
It monitors the rear area of the vehicle
and provides information to the driver.1 Blind Spot Detection2 Lane Change Assist3 Rear Cross Traffic Alert
The system will activate if vehicle speed exceeds 20 mph.• To turn on the BSD, press the BSD
button (indicator illuminated).
• To turn off the BSD, press the BSD
button again.
When the vehicle is in R (Reverse), the system provides an alert if a
vehicle is approaching from the sides.Rear Cross Traffic AlertBLIND SPOT DETECTION SYSTEM (BSD)
3
1
DRIVING
DRIVE MODE INTEGRATED CONTROL SYSTEM
You can select the drive mode
according to your preference or the
road condition.
The system initializes to the NORMAL
mode (except ECO mode)
after the vehicle is restarted.
Each time you press the button, the
drive mode is changed as follows :
Eco mode system helps to improve fuel efficiency. When the ECO
mode system is activated, the vehicle acceleration, gear shift points
and air conditioning perfomance will be reduced to conserve the fuel
consumption.
ECO modeNormal mode provides regular daily driving performance with some
fuel efficiency.NORMAL modeSport mode provides a sporty feel and may have heavier steering
effort. In Sport mode, the fuel efficiency may decrease. SPORT mode
NORMAL
ECO
SPORT
Normal mode is not displayed on
the instrument cluster.
