
Continued113
uuLocking and Unlocking the Doors uLocking/Unlocking the Doors from the Outside
Controls
■Locking the doors
Press the door lock button on a front door. u Some exterior lights flash; the beeper 
sounds; all the doors lock; and the 
security system sets.1Using the Smart Entry with Push Button Start System*
•Do not leave the smart entry remote in the vehicle 
when you get out. Carry it with you.
•Even if you are not carrying the smart entry remote, 
you can lock or unlock the doors or open the trunk 
while someone else with the remote is within 
range.
•The door may be unlocked  if the door handle is 
covered with water in heavy rain or in a car wash if 
the smart entry remote is within range.
•If you grip a door handle  wearing gloves, the door 
sensor may be slow to  respond or may not respond 
by unlocking the doors.
•After locking the door, wait  at least two seconds 
before unlocking it  by gripping the handle.
•The door might not open if  you pull it immediately 
after gripping the door handle. Grip the handle 
again and confirm that th e door is unlocked before 
pulling the handle.
•Even within the 32 inches (80 cm) radius, you may 
not be able to lock/unlock the doors with the smart 
entry remote if it is a bove or below the outside 
handle.
•The smart entry remote may not operate if it is too 
close to the door and door glass.
Door Lock Button
* Not available on all models 

Continued115
uuLocking and Unlocking the Doors uLocking/Unlocking the Doors from the Outside
Controls
■Locking the doors (Walk away auto 
lock)*
When you walk away from the vehicle while 
carrying the smart entry  remote, the doors will 
automatically lock.
The auto lock function  activates when all 
doors and trunk are closed, and the smart 
entry remote is within about 6 feet (2 m) 
radius of the outside door handle.
1. Exit vehicle while ca rrying smart entry 
remote and close door(s).
2. While within about 6 feet (2 m) radius of 
the vehicle.
u The beeper sounds; the auto lock 
function will be activated.
3. Carry the smart entry remote beyond about 
6 feet (2 m) from the vehicle and remain 
outside this range for 2 or more seconds.
u Some exterior lights flash; the beeper 
sounds; all doors will then lock.
1Locking the doors (Walk away auto lock)*
The auto lock function is set to OFF as the factory 
default setting. The auto lo ck function can be set to 
ON using the audio/information screen. 2 Customized Features  P. 303
After the auto lock function has been activated, 
when you stay within the locking/unlocking 
operation range, the indicator on the smart entry 
remote will continue to  flash until the doors are 
locked.
When you stay beside the vehicle within the 
operation range, the doors wi ll automatically lock 
approximately 30 seconds after the auto lock 
function activating beeper sounds.
When you open a door after  the auto lock function 
activating beeper sounds, the auto lock function will 
be delayed until all doors and trunk are closed.
When all doors and trunk ha ve been closed and the 
smart entry remote is inside the vehicle, or if the 
smart entry remote is not detected within about 
6 feet (2 m) of the vehicle, auto lock function will not 
be activated.
The activation range of 
the auto lock function is 
about 6 feet (2 m)
* Not available on all models 

uuLocking and Unlocking the Doors uLocking/Unlocking the Doors from the Outside
116
Controls
To temporarily deactivate the function:
1. Set the power mode to VEHICLE OFF 
(LOCK).
2. Open the driver’s door.
3. Using the master door lock switch, operate 
the lock as follows:
Lock  Unlock  Lock  Unlock.
u The beeper sounds and the function is 
deactivated.
To restore the function:
• Set the power mode to ON.
• Lock the vehicle without using the auto lock 
function
• Open or close the door.1Locking the doors (Walk away auto lock)*
The auto lock function does  not operate when any of 
the following conditions are met.
•The smart entry remote is inside the vehicle.
•A door or the hood is not closed.
•The power mode is set to any mode other than 
OFF.
•The smart entry remote is not located within a 
radius of about 6 feet (2  m) from the vehicle when 
you get out of the vehicle and close the doors.
The auto lock function will make the warning in the 
following cases.
The warning buzzer will sound  to make sure the walk 
away auto lock is not activated.
•The auto lock func tion is deactivated.
Auto lock function operation stop beeper
After the auto lock function has been activated, the 
auto lock operation stop beeper sounds for 
approximately two seconds  in the following cases.
•The smart entry remote is put inside the vehicle 
through a window.
•You are located too close to the vehicle.•The smart entry remote is put inside the trunk.
If the warning beeper sounds, check that you are 
carrying the smart entry remote. Then, open/close a 
door and confirm the auto  lock activation beeper 
sounds once.
* Not available on all models 

Continued117
uuLocking and Unlocking the Doors uLocking/Unlocking the Doors from the Outside
Controls
■Locking the doors
Press the lock button.
Once: u Some exterior lights flash, all the doors 
lock, and the security system sets.
Twice (within five se conds after the first 
push): u Some exterior lights flash, the beeper 
sounds and verifies the security system is 
set.
■Unlocking the doors
Press the unlock button.
Once: u Some exterior lights flash twice, and the 
driver’s door unlocks.
Twice:
u Some exterior light s flash twice, the 
remaining doors unlock.
■Using the Remote Transmitter1 Using the Remote Transmitter
If you do not open a door within 30 seconds of 
unlocking the vehicle with  the remote transmitter, 
the doors will auto matically relock.
You can change the relock timer setting. 2 Customized Features  P. 303
You can lock or unlock the doors using the remote 
transmitter only when the power mode is in VEHICLE 
OFF.
The remote transmitter us es low-power signals, so 
the operating range may vary depending on the 
surroundings.
The remote will not lock th e vehicle when a door is 
open.
If the distance at which the remote transmitter works 
varies, the batter y is probably low.
If the LED does not come on when you press a 
button, the battery is dead.
2 Replacing the Button Battery  P. 541
You can customize the door lock mode and keyless 
lock acknowledge ment setting.
2 Customized Features  P. 303
Models with Display Audio
Models with Display Audio
LED
Unlock 
Button Lock 
Button
LED
Unlock 
Button Lock 
Button 

uuLocking and Unlocking the Doors uLocking/Unlocking the Doors from the Outside
118
Controls
If the smart entry remote battery or the ve hicle battery is dead, use the key instead 
of the smart entry remote.  Fully insert the key and turn it.
■Locking the front doors
Push the lock tab forward 
a or push the 
master door lock switch in the lock direction 
b, and close the door.
■Locking the rear doors
Push the lock tab forward and close the door.
■Lockout prevention system
The door cannot be locked when any door is open. If trunk is open, door can be 
locked.
■Locking/Unlocking the Doors Using a Key1 Locking/Unlocking the Doors Using a Key
When you lock the driver’s door with a key, all the 
other doors and trunk lock  at the same time. When 
unlocking, the driver’s door unlocks first. Turn the 
key a second time within a few seconds to unlock the 
remaining doors and the trunk.
You can customize the door unlock mode setting. 2 Customized Features  P. 303
Models with Display AudioLock
Unlock
■Locking a Door Without Using a Key1Locking a Door Without Using a Key
When you lock the driver’s door or the passenger’s 
door, all the other doors lock at the same time.
Make sure you have the key in your hand when you 
lock the driver’s door, any  of the other doors or the 
trunk, otherwise you may end up locking the key 
inside the vehicle.  

128
Controls
Opening and Closing the Trunk
Precautions for Opening/Closing the Trunk
■Opening the trunk
Open the trunk all the way. u If it is not fully opened, the trunk lid may begin to close under its own weight.
■Closing the trunk
Keep the trunk lid clos ed while driving to: 
u Avoid possible damage.
Using the key
If the smart entry remote battery or the ve hicle battery is dead, use the key instead 
of the smart entry remote.  1.Swing open the tailgate.
2. Fully insert the key and turn it.
3. Open the trunk. 

129
uuOpening and Closing the Trunk uUsing the Trunk Release Button
Controls
Using the Trunk Release Button
Push up the trunk releas e button on the trunk 
lid after all the doors are unlocked.
Even if the trunk is locked, you can open the 
trunk if you carry the smart entry remote. u The beeper will sound.
Trunk Main Switch
The trunk main switch disables the trunk 
release button on the trunk lid to protect 
luggage in the trunk.
1.Turn off the trunk main  switch in the glove 
box.
2. Lock the glove box.
1Using the Trunk Release Button
•If you forget the remote inside, the beeper will 
sound and the trunk will not close.
•A person who is not carrying the smart entry 
remote can unlock the tr unk if a person who is 
carrying it is within range.
•Do not leave the smart entry remote inside the 
trunk and close the lid. The beeper sounds and the 
trunk cannot be closed.
•Do not carry the smart entry remote near the trunk 
lid when closing it.
Trunk Release Button
1 Trunk Main Switch
If you need to give the ke y to someone else, remove 
the built-in key from the smart entry remote by 
sliding the release knob, and give the remote as a 
valet key.
ON
OFF
Trunk Main 
Switch 

131Continued
Controls
Security System
Immobilizer System
The immobilizer system prevents a key that has not been pre-registered from 
starting the engine. Each key  contains electronic transmitters that use electronic 
signals to verify the key.
Pay attention to the follo wing when pressing the ENGINE START/STOP button:
• Do not allow objects that emit  strong radio waves near the ENGINE START/
STOP  button.
• Make sure the key is not covered  by or touching a metal object.
• Do not bring a key from another vehicle’s immobilizer system near the  ENGINE 
START/STOP button.
• Do not put the key near magnetic items.  Electronic device such as televisions and 
audio systems emit strong magnetic fiel ds. Note that even a key chain can 
become magnetic.
Security System Alarm
The security system alarm activates when  the trunk, hood or doors are forcibly 
opened. The alarm does not go off if the trunk or doors are opened with the key, 
remote transmitter or smart entry with push button start system.
However, the alarm goes off if a door is  opened with the key and the shift lever is 
moved out of 
(P or the hood is opened before  the power mode is set to ON.
■When the security system alarm activates
The horn sounds intermittently , some exterior lights flash.
1Immobilizer System
NOTICE
Leaving the smart entry remote in the vehicle can 
result in theft or accident al movement of the vehicle.
Always take the key with you whenever you leave the 
vehicle unattended.
Do not alter the system or  add other devices to it.
Doing so may damage the system and make your 
vehicle inoperable.
1 Security System Alarm
Do not alter the system or  add other devices to it.
Doing so may damage the system and make your 
vehicle inoperable.
The security alarm continues for a maximum of two 
minutes until the security system alarm deactivates.