
52    ||    53
       VEHICLE CONTROLS
VEHICLE CONTROLS
TABLE OF CONTENTS
INDEX
VISUAL INDEX
VOICE COMMAND 
INDEX
SAFETY 
INFORMATION
CUSTOMER 
INFORMATION
INSTRUMENT PANEL
SPECIFICATIONS
VEHICLE 
CONTROLS 
MAINTENANCE
AUDIO AND 
CONNECTIVITY
HANDLING THE  UNEXPECTED
BLUETOOTH® 
HANDSFREELINK®
DRIVING
HONDALINK®
NAVIGATION
Air Conditioning System* 
Manually control the front and rear heating and cooling in your vehicle’\
s interior 
using the buttons on the dashboard.
 Front Operation
Rear temperature 
down button Rear temperature 
up button
Rear fan control 
buttons
Rear On/Off 
button
Rear mode 
button
Fan control 
dial
A/C 
button MAX A/C 
button Windshield 
defroster button Temperature 
control dial
Recirculation button: 
Recirculation mode (indicator on): 
Recirculates air from the vehicle’s 
interior. 
Fresh Air mode (indicator off): 
Maintains outside ventilation. 
Rear defogger/
heated door 
mirrors button*
On/Off 
button 
MODE button:  
Change airflow 
location.
*if equipped
Climate Control System* 
The automatic climate control system can maintain your preferred interio\
r 
temperature by selecting the proper mix of heated or cooled air and fan \
speed. Use 
the buttons on the dashboard to control both front and rear operation.
 Front Operation
AUTO button: Press, then use 
the temperature control dial to 
set your preferred temperature. 
SYNC button: Set 
the passenger’s 
side temperature 
to the same as  
the driver’s side.  Driver’s side 
temperature 
control dial
A/C 
buttonPassenger’s side 
temperature 
control dial
Recirculation button: 
Recirculation mode (indicator on): 
Recirculates air from the vehicle’s 
interior. 
Fresh Air mode (indicator off): 
Maintains outside ventilation. 
Rear defogger/
heated door 
mirrors button*
Windshield 
defroster 
button 
Fan control 
buttons
ON/OFF 
button
Mode button: 
Change airflow 
location.
*if equipped
 Rear Operation
 Rear Operation
Rear lock button:  
Disable rear control.
Rear Settings button: 
Turn the rear controls 
on, then press to adjust 
rear temperature.
Rear On/Off 
button                                                           

110    ||    111
       HANDLING THE UNEXPECTED
HANDLING THE UNEXPECTED
TABLE OF CONTENTS
INDEX
VISUAL INDEX
VOICE COMMAND 
INDEX
SAFETY 
INFORMATION
CUSTOMER 
INFORMATION
INSTRUMENT PANEL
SPECIFICATIONS
VEHICLE 
CONTROLS 
MAINTENANCE
AUDIO AND 
CONNECTIVITY
HANDLING THE  UNEXPECTED
BLUETOOTH® 
HANDSFREELINK®
DRIVING
HONDALINK®
NAVIGATION
Overheating
If the temperature gauge needle is at the H mark, the engine suddenly lo\
ses power, 
or steam or spray comes out from under the hood, your engine is overheat\
ing.
1.  Immediately park the vehicle in a safe place. Turn 
off all accessories and turn on the hazard warning 
lights.
2.  If steam or spray is not present: Keep the engine 
running and open the hood.
If steam or spray is present: Turn off the engine and 
wait until it subsides. Then, open the hood.
3.  Check that the cooling fan is operating and stop the engine once the tem\
perature 
gauge needle comes down. If the cooling fan is not operating, immediatel\
y stop 
the engine.
4.  Once the engine has cooled down, inspect the coolant level and check the\
 
cooling system components for leaks. If the coolant level in the reserve\
 tank 
is low, add coolant until it reaches the MAX mark. If there is no coolant in t\
he 
reserve tank, make sure the radiator is cool, then cover the radiator ca\
p with a 
heavy cloth and open the cap. If necessary, add coolant up to the base of the 
filler neck, and put the cap back on.
5.  Once the engine has cooled sufficiently, restart it and check the temperature 
gauge. If the temperature needle has gone down, resume driving. If it ha\
s not 
gone down, contact a dealer for repairs.
Steam and spray from an overheated engine can seriously scald you.
Do not open the hood if steam is coming out.
WARNING
Removing the radiator cap while the engine is hot can cause the coolant \
to 
spray out, seriously scalding you.
Always let the engine and radiator cool down before removing the radiato\
r cap.
WARNING
Continuing to drive with the temperature gauge needle at the H mark may \
damage 
the engine.
NOTICE
Reserve
tank
MAXMIN
Emergency Engine Stop*
The eNGINe START/STOP button may be used to stop the engine due to an 
emergency situation even while driving. If you must stop the engine, cho\
ose one of 
the following operations:
•  Press and hold the eNGINe START/STOP button for 
two seconds, or
•  Firmly press the eNGINe START/STOP button two 
times.
Emergency Towing
Call a professional towing service if you need to tow your vehicle.
Flat bed equipment: The operator loads your vehicle on the back of a tru\
ck. This is 
the best way to transport your vehicle.
Wheel lift equipment: The tow truck uses two pivoting arms that go under\
 the front 
tires and lift them off the ground. The rear tires remain on the ground.\
 This is an 
acceptable way to tow your vehicle.
Trying to lift or tow your vehicle by the bumpers will cause serious dama\
ge. The 
bumpers are not designed to support the vehicle’s weight.
Improper towing such as towing behind a motorhome or other motor vehicle\
 can 
damage the transmission.
NOTICE
*if equipped
The steering wheel will not lock. The power mode changes to ACCeSSORY, unless 
the shift lever is in Park (P), in which case the power mode changes t\
o veHICLe OFF.
Because turning off the engine also disables the power assist the engine\
 provides 
to the steering and braking systems, it will require significantly mor\
e physical effort 
and time to steer and slow the vehicle. Downshift gears and use both fee\
t on the 
brake pedal, if necessary, to slow the vehicle and stop immediately in a safe place. Do not press the button while driving unless it is absolutely necessary \
for the 
engine to be switched off.
NOTICE  

128    ||    129
       MAINTENANCE
MAINTENANCE
TABLE OF CONTENTS
INDEX
VISUAL INDEX
VOICE COMMAND 
INDEX
SAFETY 
INFORMATION
CUSTOMER 
INFORMATION
INSTRUMENT PANEL
SPECIFICATIONS
VEHICLE 
CONTROLS 
MAINTENANCE
AUDIO AND 
CONNECTIVITY
HANDLING THE  UNEXPECTED
BLUETOOTH® 
HANDSFREELINK®
DRIVING
HONDALINK®
NAVIGATION
Engine Coolant
Park the vehicle on level ground. Check the reserve tank and the coolant\
 level in the 
radiator. We recommend Honda Long Life Antifreeze/Coolant Type 2.
 Checking the Reserve Tank
1.  Check the amount of coolant in the reserve tank.
2.  If the coolant level is below the MIN mark, add 
the specified coolant until it reaches the MAX 
mark.
3.  Inspect the cooling system for leaks.
 Adding Coolant
1.  Make sure the engine and radiator are cool.
2.  Turn the radiator cap counterclockwise and 
relieve any pressure in the coolant system. Do 
not push the cap down when turning.
3.  Push down and turn the radiator cap 
counterclockwise to remove it.
4.  The coolant level should be up to the base of the 
filler neck. Add coolant if it is low.
5.  Put the radiator cap back on, and tighten it fully.
6.  Pour coolant into the reserve tank until it reaches 
the MAX mark. Put the cap back on the reserve 
tank.
Removing the radiator cap while the engine is hot can cause the coolant \
to 
spray out, seriously scalding you.
Always let the engine and radiator cool down before removing the radiato\
r 
cap. 
WARNING
If temperatures consistently below −22°F (−30°C) are expec\
ted, the coolant 
mixture should be changed to a higher concentration. Consult a dealer fo\
r details 
for more information.
NOTICE
Pour the fluid slowly and carefully so you do not spill any. Clean up any spills 
immediately; they can damage components in the engine compartment.
NOTICE
Radiator cap
Reserve
tank MAX
MIN
Checking the Battery
The battery condition is monitored by the sensor on the negative termina\
l. If there 
is a problem with the sensor, a message appears on the display. Have your vehicle 
checked by a dealer.
Check the battery terminals for corrosion monthly.
For jump starting, see page 109.
WARNING: Battery posts, terminals, and related accessories contain lead and lea\
d 
compounds. Wash your hands after handling.
Window Washer Fluid
If the washer fluid level is low, fill the washer reservoir. 
Canadian models
If the washer fluid level is low, the washer level 
indicator or a message appears.  The battery gives off explosive hydrogen gas during normal operation.
A spark or flame can cause the battery to explode with enough force to\
 kill or 
seriously hurt you.
When conducting any battery maintenance, wear protective clothing and a \
face shield, or have a skilled technician do it.
WARNING
Do not use engine antifreeze or a vinegar/water solution in the windshie\
ld washer 
reservoir. Antifreeze can damage your vehicle’s paint. A vinegar/water solution 
can damage the windshield washer pump.
NOTICE