2017 HONDA HR-V bulb

Contents
Child Safety P. 57Exhaust Gas Hazard P. 69Safety Labels P. 70
Opening and Closing the Tailgate P. 113 Security System P. 116
Opening and Closing the Moonroof* P. 121
Adjusting the Mirrors P. 138 Adjusting the Seats P. 140
Heating and Cooling System
* P. 161 Climate Control System* P. 165
Audio Error Messages P. 231General Information on the Audio System P. 235
Off-Highway Driving Guidelines P. 323 When Driving P. 325 Braking P. 363
Refueling P. 374 Fuel Economy and CO
2 Emissions P. 376
Maintenance Under the Hood P. 385 Replacing Light Bulbs P. 397
Checking and Maintaining Tires P. 409 Battery P. 419 Remote Transmitter Care P. 421
Cleaning P. 424 Accessories and Modifications P. 429
Engine Does Not Start P. 443Jump Starting P. 446 Shift Lever Does Not Move P. 448
Emergency Towing P. 461 When You Cannot Open the Tailgate P. 462
Devices that Emit Radio Waves P. 469 Reporting Safety Defects P. 470
Authorized Manuals P. 475 Customer Service Information P. 476
Quick Reference GuideP. 4
Safe DrivingP. 29
Instrument PanelP. 71
ControlsP. 93
FeaturesP. 175
DrivingP. 313
MaintenanceP. 377
Handling the UnexpectedP. 431
InformationP. 465
IndexP. 478
17 HR-V HDMC-31T7A6100.book 3 ページ ２０１６年７月２０日　水曜日　午前９時５０分

80
uuIndicators u
Instrument Panel
IndicatorNameOn/BlinkingExplanation
Starter System
Indicator*
●Comes on for a few seconds when you
set the power mode to ON, then goes off
when the engine starts.
●Comes on if the starter system has a
problem.
●As a temporary measure, press and hold the
ENGINE START/STOP button for up to 15 seconds
while pressing the brake pedal and clutch pedal
(manual transmission only), and manually start the
engine. Have your vehicle checked by a dealer.
Turn Signal and
Hazard Warning
Indicators●Blinks when you operate the turn signal
lever.
●Blink if you press the hazard warning
button.
●Does not blink or blinks rapidly - A turn signal
light bulb has blown. Change the bulb immediately.
2 Replacing Light Bulbs P. 398, 401
High Beam Indicator●Comes on when the high beam
headlights are on.—
Lights On Indicator
●Comes on whenever the light switch is
on, or in AUTO* when the exterior lights
are on.
●If you remove the key from the ignition switch*, or
set the power mode* to VEHICLE OFF (LOCK) while
the exterior lights are on, a chime sounds when the
driver’s door is opened.
Fog Light Indicator*●Comes on when the fog lights are on.—
U.S.
Canada
* Not available on all models
17 HR-V HDMC-31T7A6100.book 80 ページ ２０１６年７月２０日　水曜日　午前９時５０分

350
uuWhen Driving uForward Collision Warning (FCW)*
Driving
FCW may not activate or may not detect a vehicle in front of your vehicle, and may activate even when you are aware of a vehicl e ahead
of you, or when there is no vehicl e ahead under the following conditions.
■FCW Limitations
Condition
●The distance between your vehicle and the vehicle ahead of you is too short.●A vehicle cuts in front of you at a slow speed, and it brakes suddenly.●A vehicle suddenly crosses in front of you.●When either your vehicle or the vehi cle ahead of you accelerates rapidly.●The vehicle ahead of you is a motorcycle, a small vehicle, or a unique vehicle such as a tractor.●When you drive off-road or on a mountain road, or curved and wi nding road for an extended period that makes it difficult for the camera to properly
detect a vehicle in front of you.
●When there are pedestrians or animals in front of your vehicle.●When you drive in bad weather (rain, fog, etc.).●A heavy load in the rear or modificati ons to the suspension tilts your vehicle.●An abnormal tire condition is detected (wrong tire size, flat tire, etc.).●When the windshield is blocked by dirt, mud, leaves, wet snow, etc.●When the temperature inside the system is high.●A sudden change between light and dark such as an entrance or exit of a tunnel.●You drive into the sunlight (e.g. at dawn or dusk).●When the windshield is dirty or cloudy.●When streetlights are perceived as the ta illight of a vehicle in front of yours.●When driving at night, the vehi cle ahead of you is running with either taillight bulb burned out.●When you drive in the shadows of trees, buildings, etc.
17 HR-V HDMC-31T7A6100.book 350 ページ ２０１６年７月２０日　水曜日　午前９時５０分

377
Maintenance
This chapter discusses basic maintenance.
Before Performing MaintenanceInspection and Maintenance ............ 378
Safety When Performing Maintenance .... 379Parts and Fluids Used in Maintenance Service ........................................... 380
Maintenance Minder
TM..................... 381
Maintenance Under the Hood
Maintenance Items Under the Hood ..... 385Opening the Hood ........................... 386
Recommended Engine Oil ................ 387
Oil Check ......................................... 388
Adding Engine Oil ............................ 389
Changing the Engine Oil and Oil Filter..... 390
Engine Coolant ................................ 392
Transmission Fluid ............................ 394
Brake/Clutch
* Fluid .......................... 395
Refilling Window Wa sher Fluid......... 396
Replacing Light Bulbs ....................... 397
Checking and Maintaining Wiper
Blades .......................................... 405
Checking and Maintaining Tires
Checking Tires ................................. 409
Tire and Loading Information Label .. 411
Tire Labeling .................................... 411
DOT Tire Quality Grading (U.S. Vehicles) ...... 413Wear Indicators................................ 415 Tire Service Life ................................ 415
Tire and Wheel Replacement ........... 416
Tire Rotation .................................... 417
Winter Tires ..................................... 418
Battery ............................................... 419
Remote Transmitter Care
Replacing the Button Battery ........... 421
Heating and Cooling System
*/Climate
Control System* Maintenance ....... 423
Cleaning
Interior Care .................................... 424
Exterior Care.................................... 426
Accessories and Modifications ........ 429
* Not available on all models
17 HR-V HDMC-31T7A6100.book 377 ページ ２０１６年７月２０日　水曜日　午前９時５０分

378
Maintenance
Before Performing Maintenance
Inspection and Maintenance
For your safety, perform all listed inspections and maintenance to keep your vehicle
in good condition. If you become aware of any abnormality (noise, smell, insufficient
brake fluid, oil residue on the ground, etc.), have your vehicle inspected by a dealer.
(Note, however, that service at a dealer is not mandatory to keep your warranties in
effect.)
■Daily inspections
Perform inspections before long distance tri ps, when washing the vehicle, or when
refueling.
■Periodic inspections
• Check the brake/clutch* fluid level monthly.
2 Brake/Clutch* Fluid P. 395
•Check the tire pressure monthly. Examin e the tread for wear and foreign objects.
2Checking and Maintaining Tires P. 409
•Check the operation of the exterior lights monthly.
2 Replacing Light Bulbs P. 397
•Check the condition of the wiper bl ades at least every six months.
2Checking and Maintaining Wiper Blades P. 405
■Types of Inspection and Maintenance
1Inspection and Maintenance
Maintenance, replacement, or repair of
emissions control devices and systems may be
done by any automotive repair establishment or
individuals using parts that are “certified” to
EPA standards.
According to state and fede ral regulations, failure to
perform maintenance on the maintenance main
items marked with # will not void your emissions
warranties. However, all ma intenance services should
be performed in accordan ce with the intervals
indicated by the information display.
2 Maintenance Service Items P. 383
If you want to perform complex maintenance tasks
that require more skills a nd tools, you can purchase a
subscription to the Service Express website at
www.techinfo.honda.com. 2 Authorized Manuals P. 475
If you want to perform ma intenance yourself, make
sure that you have the necessary tools and skills first.
After performing ma intenance, update the records in
the separate maintenance booklet.
U.S. models
* Not available on all models
17 HR-V HDMC-31T7A6100.book 378 ページ ２０１６年７月２０日　水曜日　午前９時５０分

397
Maintenance
Replacing Light Bulbs
Headlight Bulbs
When replacing, use the following bulbs.1.Remove the coupler.
2. Remove the rubber weather seal.
3. Remove the hold-down wire, then remove
the bulb.
4. Insert a new bulb.
5. Reinstall the hold-down wire. Hook the end
of the wire on the knob in the slot.
6. Reinstall the rubber weather seal.
7. Insert the coupler into the connector of the
bulb.
High/Low beam headlight: 60/55 W (HB2 for halogen bulb type)
■High/Low Beam Headlight
1Headlight Bulbs
NOTICE
Halogen bulbs get very hot when lit.
Oil, perspiration, or a scratch on the glass can cause
the bulb to overhe at and shatter.
The headlight aim is set by the factory, and does not
need to be adjusted. Howeve r, if you regularly carry
heavy items in the cargo area, have the aiming
readjusted at a dealer or by a qualified technician.
When replacing a halogen bu lb, handle it by its base,
and protect the glass from c ontact with your skin or
hard objects. If you touch the glass, clean it with
denatured alcohol and a clean cloth.
Rubber Weather Seal
Coupler
Hold-Down Wire
Bulb
Slot
17 HR-V HDMC-31T7A6100.book 397 ページ ２０１６年７月２０日　水曜日　午前９時５０分

398
uuReplacing Light Bulbs uFront Turn Signal/Parking Light Bulbs
Maintenance
Front Turn Signal/Parking Light Bulbs
When replacing, use the following bulbs.
1.Turn the socket counter-clockwise and
remove it.
2. Remove the old bulb and insert a new bulb.
Front Turn Signal/Parking Light: 28/8 W (Amber)
Bulb
Socket
17 HR-V HDMC-31T7A6100.book 398 ページ ２０１６年７月２０日　水曜日　午前９時５０分

399
uuReplacing Light Bulbs uFront Side Marker Light Bulbs
Continued
Maintenance
Front Side Marker Light Bulbs
When replacing, use the following bulbs.
1.Turn the socket counter-clockwise and
remove it.
2. Remove the old bulb and insert a new bulb.
Fog Light Bulbs*
When replacing, use the following bulbs.
1.Remove the clip using a flat-tip screwdriver,
and push up the inner fender.
Front Side Marker Light: 5 W
Bulb
Socket
Fog Light: 35 W (H8 for halogen bulb type)
1 Fog Light Bulbs*
NOTICE
Halogen bulbs get very hot wh en lit. Oil, perspiration,
or a scratch on the glass can cause the bulb to
overheat and shatter.
When replacing a halogen bulb, handle it by its
plastic case, and protect the glass from contact with
your skin or hard objects. If you touch the glass, clean
it with denatured alc ohol and a clean cloth.
Clip
Inner Fender
* Not available on all models
17 HR-V HDMC-31T7A6100.book 399 ページ ２０１６年７月２０日　水曜日　午前９時５０分