Page 66 of 643

uuChild Safety uSafety of Infants and Small Children
64
Safe DrivingMost child seats are LATCH-compatible (L ower Anchors and Tethers for CHildren). 
Some have a rigid-type conn ector while others have a flexible-type connector. Both 
are equally easy to use. Some existing and  previously owned child seats can only be 
installed using the seat belt. Whichever type you choose, follow the child seat 
manufacturer’s use and care instructions as  well as the instructions in this manual. 
Proper installation is key to ma ximizing your child’s safety.
In seating positions and vehicles not equipped with LATCH, a LATCH-compatible 
child seat can be installed using the seat belt and a top tether for added security. 
This is because all child seats are required to  be designed so that they can be secured 
with a lap belt or the lap part of a lap/sh oulder belt. In addition, the child seat 
manufacturer may advise that a seat belt be used to attach a LATCH-compatible seat 
once a child reaches a specified weight.  Please read the child seat owner’s manual 
for proper installation instructions.
■Important consideration wh en selecting a child seat
Make sure the child seat meets th e following three requirements:
• The child seat is the correct  type and size for the child.
• The child seat is the correct  type for the seating position.
• The child seat is compliant with Federa l Motor Vehicle Safety Standard 213 or 
Canadian Motor Vehicle Safety Standard 213.
■Selecting a Child Seat1 Selecting a Child Seat
Installation of a LATCH-compatible child seat is 
simple.
LATCH-compatible child s eats have been developed 
to simplify the installati on process and reduce the 
likelihood of injuries caused  by incorrect installation.
17 CIVIC 4D HCM (KA KC KL)-31TBA6111.book  64 ページ  2018年10月25日 木曜日 午前11時56分 
     
        
        Page 69 of 643

Continued67
uuChild Safety uSafety of Infants and Small Children
Safe Driving1. Place the child seat on the vehicle seat.
2. Route the seat belt through the child seat 
according to the seat manufacturer’s 
instructions, and insert  the latch plate into 
the buckle.
u Insert the latch plate fully until it clicks.
3. Slowly pull the shoulder part of the belt all 
the way out until it stops. This activates the 
lockable retractor.
4. Let the seat belt completely wind up into 
the retractor, then try to pull it out to make 
sure the retractor is locked.
u If you are able to pull the shoulder belt 
out, the lockable retractor is not 
activated. Pull the seat belt all the way 
out, and repeat steps 3 – 4.
5. Grab the shoulder part of the seat belt near 
the buckle, and pull up to remove any slack 
from the lap part of the belt.
u When doing this, place your weight on 
the child seat and push it into the vehicle 
seat.
■Installing a Child Seat with a Lap/Shoulder Seat Belt1Installing a Child Seat with  a Lap/Shoulder Seat Belt
A child seat that is not  properly secured will not 
adequately protect a child  in a crash and may cause 
injury to the child or  other vehicle occupants.
17 CIVIC 4D HCM (KA KC KL)-31TBA6111.book  67 ページ  2018年10月25日 木曜日 午前11時56分 
     
        
        Page 155 of 643
153
Controls
Opening and Closing the Trunk
Precautions for Opening/Closing the Trunk
■Opening the trunk
Open the trunk all the way. u If it is not fully opened, the trunk lid may begin to close under its own weight.
■Closing the trunk
Keep the trunk lid closed while driving to:
u Avoid possible damage.
u Prevent exhaust gas from leaking into the vehicle.
2 Exhaust Gas Hazard  P. 72
Using the Trunk Opener
Pressing the trunk opener on the driver’s door 
unlocks and opens the trunk.
2When You Cannot Open the Trunk  P. 613
Trunk Opener
17 CIVIC 4D HCM (KA KC KL)-31TBA6111.book  153 ページ  2018年10月25日 木曜日 午前11時56分 
     
        
        Page 187 of 643

185
uuAdjusting the Seats uRear Seats
Controls
Rear Seats
1. Pull the release lever in the trunk to release 
the lock.
2. Fold the seat-back down.
■Folding Down the Rear Seats1Folding Down the Rear Seats
The rear seat-back(s
*) can be folded down to 
accommodate bulkier items in the trunk.
Never drive with the seat-back folded down and the 
trunk lid open. 2 Exhaust Gas Hazard  P. 72
To lock a seat-back upright,  push it backwards until it 
locks.
When returning the seat-back  to its original position, 
push it firmly back. Also, m ake sure all rear shoulder 
belts are positioned in  front of the seat-back.
Make sure that the folded seat-back does not press 
against the front passenger se at, as this can cause the 
weight sensors in the front  passenger seat to work 
improperly. 2 Passenger Front Airbag Off Indicator P. 58
Make sure all items in the trunk or items 
extending through the opening into the rear 
seats are properly secured. Loose items can fly 
forward if you have to brake hard.
The front seat(s) must be  far enough forward so they 
do not interfere with the rear seats as they fold 
down.
Release 
Lever*
Release Lever
* Not available on all models
17 CIVIC 4D HCM (KA KC KL)-31TBA6111.book  185 ページ  2018年10月25日 木曜日 午前11時56分 
     
        
        Page 423 of 643

421
uuBefore Driving uMaximum Load Limit
Continued
Driving
Maximum Load Limit
The maximum load for your vehicl e is 850 lbs (385 kg). See the 
Tire and Loading Information la bel attached to the driver’s 
doorjamb.
This figure includes the total weig ht of all occupants, cargo, and 
accessories, and the tongue load if you are towing a trailer.
Steps for Determining  Correct Load Limit -
(1) Locate the statement “The comb ined weight of occupants and 
cargo should never exceed XXX kg or XXX lbs.” on your 
vehicle’s placard.
(2) Determine the combined weight of the driver and passengers 
that will be riding in your vehicle.
(3) Subtract the combined weight of the driver and passengers 
from XXX kg or XXX lbs.
(4) The resulting figure equals the available amount of cargo and 
luggage load capacity. For example, if  the “XXX” amount 
equals 1,400 lbs. and there will  be five 150 lb. passengers in 
your vehicle, the am ount of available cargo and luggage load 
capacity is 650 lbs. (1,400 - 750 (5 x 150) = 650 lbs.)1 Maximum Load Limit
Gross Vehicle Weight Rating (GVWR):
The maximum allowable weight of the vehicle, all 
occupants, all accesso ries and all cargo.
2 Specifications  P. 616, 618
Gross Axle Weight Rating (GAWR):
The maximum allowable weight of the vehicle axle. 2 Specifications  P. 616, 618
3WARNING
Overloading or improper loading 
can affect handling and stability 
and cause a crash in which you 
can be hurt or killed.
Follow all load limits and other 
loading guidelines in this manual.
Label Example
17 CIVIC 4D HCM (KA KC KL)-31TBA6111.book  421 ページ  2018年10月25日 木曜日 午前11時56分 
     
        
        Page 424 of 643

422
uuBefore Driving uMaximum Load Limit
Driving
(5) Determine the combined weight  of luggage and cargo being 
loaded on the vehicle. That we ight may not safely exceed the 
available cargo and luggage load capacity calculated in step 4.
(6) If your vehicle will be towing a tra iler, load from your trailer will 
be transferred to your vehicl e. Consult this manual to 
determine how this reduces the available cargo and luggage 
load capacity of your vehicle.
In addition, the total weight of  the vehicle, all occupants, 
accessories, cargo, and trailer tongue load must not exceed the 
Gross Vehicle Weight Rating (GVW R) or the Gross Axle Weight 
Rating (GAWR). Both are on a label on the driver’s doorjamb.
Load Limits Example
Example1
Max Load 850 lbs 
(385 kg) Passenger Weight 
150 lbs x 2 = 300 lbs  (68 kg x 2 = 136 kg) Cargo Weight 
550 lbs 
(249 kg)
Example2 Max Load 850 lbs 
(385 kg) Passenger Weight 
150 lbs x 5 = 750 lbs  (68 kg x 5 = 340 kg) Cargo Weight 
100 lbs 
(45 kg)
17 CIVIC 4D HCM (KA KC KL)-31TBA6111.book  422 ページ  2018年10月25日 木曜日 午前11時56分 
     
        
        Page 506 of 643

504
Driving
Fuel Economy and CO2 Emissions
Improving Fuel Economy and Reducing CO2 
Emissions
Achieving fuel economy and reducing CO2 emissions is dependent on several 
factors, including driving conditions, load weight, idling time, driving habits, and 
vehicle condition. Depending on these and other factors, you may not achieve the 
rated fuel economy of this vehicle.
You can optimize your fuel economy with  proper maintenance of your vehicle. 
Always maintain your vehicle in accord ance with the messages displayed on the 
information display
*/driver information interface*.
• Use the recommended viscosity engine oil,  displaying the API Certification Seal.
• Maintain the specified tire pressure.
• Do not load the vehicl e with excess cargo.
• Keep your vehicle clean. A buildup of snow or mud on your vehicle's underside 
adds weight and increases wind resistance.
■Maintenance and Fuel Economy
1Improving Fuel Economy and Reducing CO2 Emissions
Direct calculation is  the recommended method to 
determine actual fuel consumed while driving.
In Canada, posted fuel  economy numbers are 
established following a simulated test. For more 
information on how this test  is performed, please visit 
http://oee.nrcan.gc.ca/
Miles driven Gallons of 
fuel Miles per 
Gallon
100 Liters of 
fuel Kilometers 
driven L per 100 km
* Not available on all models
17 CIVIC 4D HCM (KA KC KL)-31TBA6111.book  504 ページ  2018年10月25日 木曜日 午前11時56分 
     
        
        Page 551 of 643

549
uuChecking and Maintaining Tires uTire and Loading Information Label
Continued
Maintenance
Tire and Loading Information Label
The label attached to the driver’s doorj amb provides necessary tire and loading 
information.
Tire Labeling
The tires that came on your vehicle have a 
number of markings. Those you should be 
aware of are described below.
Whenever tires are replaced,  they should be replaced with tires of the same size.
1Tire and Loading Information Label
The tire and loading informat ion label attached to the 
driver’s doorjamb contains:
aThe number of people your vehicle can carry.
bThe total weight your vehicle can carry. Do not 
exceed this weight.
cThe original tire sizes for front, rear, and spare, if 
equipped.
dThe proper cold tire pressure for front, rear, and 
spare.
Label 
Example
Example Tire Size
Tire 
Identification 
Number (TIN)
Maximum 
Tire Load
Maximum 
Tire Pressure
Tire Size
■Tire Sizes
1 Tire Sizes
Following is an example  of tire size with an 
explanation of what  each component means.
P205/55 R16 89H
P: Vehicle type (P indi cates passenger vehicle).
205: Tire width in millimeters.
55: Aspect ratio (the tire’s section height as a 
percentage of its width).
R: Tire construction code  (R indicates radial).
16: Rim diameter in inches.
89: Load index (a numerical  code associated with the 
maximum load the tire can carry).
H: Speed symbol (an alphabe tical code indicating the 
maximum speed rating).
17 CIVIC 4D HCM (KA KC KL)-31TBA6111.book  549 ページ  2018年10月25日 木曜日 午前11時56分