2017 HONDA CIVIC trunk

[x] Cancel search: trunk

Page 398 of 601

HONDA CIVIC 2017 10.G Owners Manual Continued397
uuBefore Driving uDriving Preparation
Driving
• Store or secure all items on board properly.
u Carrying too much cargo, or improperly  storing it, can affect your vehicle’s 
handling,

Page 407 of 601

HONDA CIVIC 2017 10.G Owners Manual uuWhen Driving uStarting the Engine
406
Driving
You can remotely start the engine using  the   button on the smart entry remote.
■To start the engine
When started remotely, the engine automati cally

Page 428 of 601

HONDA CIVIC 2017 10.G Owners Manual Continued427
uuWhen Driving uAdaptive Cruise Control (ACC) with Low Speed Follow (LSF)*
Driving
The system may automatically shut off and the  ACC indicator will come on under 
certain conditions. Som

Page 511 of 601

HONDA CIVIC 2017 10.G Owners Manual 510
Maintenance
Replacing Light Bulbs
Headlight Bulbs
When replacing, use the following bulbs.1.Push the tab to remove the coupler.
2. Rotate the old bulb counter-clockwise to 
remove.
3. Insert a new

Page 519 of 601

HONDA CIVIC 2017 10.G Owners Manual 518
uuReplacing Light Bulbs uTaillights
Maintenance
Taillights
Taillights are LED type. Have an authorized Honda dealer inspect and replace the 
light assembly.
Rear License Plate Light
Rear license p

Page 544 of 601

HONDA CIVIC 2017 10.G Owners Manual 543
Handling the Unexpected
This chapter explains how to handle unexpected troubles.
ToolsTypes of Tools .................................. 544
If a Tire Goes Flat
Changing a Flat Tire ...............

Page 545 of 601

HONDA CIVIC 2017 10.G Owners Manual 544
Handling the Unexpected
Tools
Types of Tools
1Types of Tools
The tools are stored in the trunk.
Wheel Nut Wrench/
Jack Handle Jack
Jack Handle Bar
Funnel
17 CIVIC 4D HCM (KA KC KL)-31TBA6100.book

Page 547 of 601

HONDA CIVIC 2017 10.G Owners Manual uuIf a Tire Goes Flat uChanging a Flat Tire
546
Handling the Unexpected
1. Open the trunk floor lid.
2. Take the tool case out of the trunk. Take 
the jack and wheel nut wrench out of the 
tool case.