Page 353 of 595

352
Features
Bluetooth® HandsFreeLink ®
Bluetooth® HandsFreeLink ® (HFL) allows you to place and receive phone calls using 
your vehicle’s audio system, without handling your cell phone.
Using HFL
■HFL Buttons
1 Bluetooth ® HandsFreeLink ®
Place your phone where y ou can get good reception.
To use HFL, you need a  Bluetooth-compatible cell 
phone. For a list of compatible phones, pairing 
procedures, and special  feature capabilities:
•U.S.: Visit www.handsfreelink.honda.com , or call 
1-888-528-7876.
•Canada: Visit  www.handsfreelink.ca , or call 1-888-
528-7876.
To use the system, the  Bluetooth On/Off Status  
setting must be On . If there is an active connection to 
Apple CarPlay, H FL is unavailable.
2 How to customize  P. 305
Voice control tips
•Aim the vents away from the ceiling and close the 
windows, as noise coming fr om them may interfere 
with the microphone.
•Press the   button when you want to call a 
number using a stored voic e tag. Speak clearly and 
naturally after a beep.
•If the microphone picks up vo ices other than yours, 
the command may be misinterpreted.
•To change the volume level, select the audio 
system’s  VOL (Volume) or use the remote audio 
controls on the steering wheel.
Up to five speed dial entries can be displayed among 
a total of 20 that can be entered. 2 Speed Dial  P. 366
Up to five previous calls  can be displayed at a time 
among a total of 20 that can be  entered. If there is no 
call history, Call History is disabled.
Models with Display Audio
 (Talk) Button
( +/(- Bar Microphone
 (Hang-up/Back) Button
 (Pick-up) Button
ENTER  Button
 Button
/ / /  Buttons34
17 CIVIC 2D HCM (KA KC KL)-31TBG6100.book  352 ページ  2016年8月31日 水曜日 午後5時43分 
     
        
        Page 361 of 595

uuBluetooth ® HandsFreeLink ®u HFL Menus
360
Features
■To pair a cell phone (when there is no 
phone paired to the system)
1. Select  Phone .
2. Select  Yes.
3. Make sure your phone is in search or 
discoverable mode, then select  Continue.
u HFL automatically searches for a 
Bluetooth ® device.
4. Select your phone when it appears on the 
list.
u If your phone does not appear, you can 
select  Refresh  to search again.
u If your phone still does not appear, select 
Phone Not Found  and search for 
Bluetooth ® devices using your phone.
From your phone, search for 
HandsFreeLink .
5. The system gives you a pairing code on the 
audio/information screen.
u Confirm if the pairing code on the screen 
and your phone match.
This may vary by phone.
■Phone Setup1Phone Setup
Your  Bluetooth -compatible phone must  be paired to 
the system before you ca n make and receive hands-
free calls.
Phone Pairing Tips:
•You cannot pair your phone  while the vehicle is 
moving.
•Up to six phones can be paired.
•Your phone's battery may dr ain faster when it is 
paired to the system.
•If your phone is not ready for pairing or not found 
by the system within three minutes, the system will 
time out and return to idle.
Once you have paired a phone, you can see it 
displayed on the screen with one or two icons on the 
right side.
These icons indicate the following: : The phone can be used with HFL.
: The phone is compatible with  Bluetooth® Audio.
If there is an active c onnection to Apple CarPlay, 
pairing of additional  Bluetooth-compatible devices is 
unavailable and  Add Bluetooth Device  is grayed 
out from the  Bluetooth Device List  screen.
17 CIVIC 2D HCM (KA KC KL)-31TBG6100.book  360 ページ  2016年8月31日 水曜日 午後5時43分 
     
        
        Page 362 of 595

Continued361
uuBluetooth ® HandsFreeLink ®u HFL Menus
Features
■To change the currently paired phone
1. Go to the phone settings screen.
2 Phone settings screen  P. 355
2.Select  Bluetooth Device List .
3. Select a phone to connect.
u HFL disconnects the connected phone 
and starts searching for another paired 
phone.
4. Select  Connect   , Connect  , or 
Connect  .
■To change the pairing code setting
1. Select .
2. Select  Settings .
3. Select  Bluetooth/Wi-Fi .
4. Select the  Bluetooth  tab.
5. Select  Edit Pairing Code .
6. Select  Random  or Fixed .
1To change the currently paired phone
If no other phones are found or  paired when trying to 
switch to another phone, HFL will inform you that the 
original phone is connected again.
To pair other  phones, select Add Bluetooth Device  
from the  Bluetooth device list  screen.
1To change the pairing code setting
The default pair ing code is 0000 until you change the 
setting.
To create your own, select  Fixed, and delete the 
current code, then enter a new one.
For a randomly generated pa iring code each time you 
pair a phone , select Random .
17 CIVIC 2D HCM (KA KC KL)-31TBG6100.book  361 ページ  2016年8月31日 水曜日 午後5時43分