2017 HONDA ACCORD HYBRID audio

Continued373
uuBluetooth ® HandsFreeLink ®u Using HFL
Features
The audio/information screen and audio/information touch screen notify you when
there is an incoming call.
■HFL Status Display1HFL Status Display
The information that appears on the audio/
information screen and audio/information touch
screen varies between phone models.
You can change the system language.
2 How to customize P. 314
Bluetooth Indicator
Appears when your phone is connected to HFL.Signal Strength
HFL Mode
Battery Level Status
Caller’s Name
Caller’s Number Roaming Status
Audio/information touch screen
Caller’s Name
Caller’s Number
Audio/information screen
Bluetooth
Indicator
Appears when your phone is connected to HFL.Signal StrengthBattery Level Status
17 ACCORD FHEV-31T3W6200.book 373 ページ ２０１６年４月１１日　月曜日　午後２時４０分

uuBluetooth ® HandsFreeLink ®u HFL Menus
380
Features
■To pair a cell phone (when there is no
phone paired to the system)
1. Select Phone .
2. Select Yes.
3. Make sure your phone is in search or
discoverable mode, then select Continue.
u HFL automatically searches for a
Bluetooth ® device.
4. Select your phone when it appears on the
list.
u If your phone does not appear, you can
select Refresh to search again.
u If your phone still does not appear, select
Phone Not Found and search for
Bluetooth ® devices using your phone.
From your phone, search for
HandsFreeLink .
5. The system gives you a pairing code on the
audio/information touch screen.
u Confirm if the pairing code on the screen
and your phone match.
This may vary by phone.
■Phone Setup1Phone Setup
Your Bluetooth -compatible phone must be paired to
the system before you ca n make and receive hands-
free calls.
Phone Pairing Tips:
•You cannot pair your phone while the vehicle is
moving.
•Up to six phones can be paired.
•Your phone's battery may dr ain faster when it is
paired to the system.
•If your phone is not ready for pairing or not found
by the system within three minutes, the system will
time out and return to idle.
Once you have paired a phone, you can see it
displayed on the screen with one or two icons on the
right side.
These icons indicate the following: : The phone can be used with HFL.
: The phone is compatible with Bluetooth® Audio.
If there is an active c onnection to Apple CarPlay®,
pairing of additional Bluetooth -compatible devices is
unavailable and Add Bluetooth Device is grayed
out from the Bluetooth Device List screen.
17 ACCORD FHEV-31T3W6200.book 380 ページ ２０１６年４月１１日　月曜日　午後２時４０分

Continued393
uuBluetooth ® HandsFreeLink ®u HFL Menus
Features
■To delete all modified voice tags
1. Select .
2. Select Settings .
3. Select System.
4. Select the Voice Recog tab.
5. Select Phonebook Phonetic
Modification .
6. Select the phone you want to delete
phonetic modification.
u The contact name list appears.
7. Select Delete All.
8. You will receive a confirmation message on
the screen, then select Yes.
You can make calls by inputting any phone
number, or by using the imported
phonebook, call history, speed dial entries, or
redial.
■Making a Call
1 Making a Call
Voice-tagged speed dial en tries can be dialed by
voice from most screens.
Press the button and say the voice tag name.
Once a call is connected, you can hear the voice of
the person you are call ing through the audio
speakers.
While there is an active connection with Apple
CarPlay ®, phone calls cannot be made with
Bluetooth ® HandsFreeLink ® and are only made from
Apple CarPlay ®.
17 ACCORD FHEV-31T3W6200.book 393 ページ ２０１６年４月１１日　月曜日　午後２時４０分

uuBluetooth ® HandsFreeLink ®u HFL Menus
396
Features
When there is an incoming call, an audible
notification sounds (i f activated) and the
incoming call screen appears.
Press the button to answer the call.
Press the button to decline or end the call.
■Receiving a Call1 Receiving a Call
Call Waiting
Press the button to put the current call on hold to
answer the incoming call.
Press the button again to return to the current
call.
Select Ignore to ignore the incoming call if you do
not want to answer it.
Press the button if you want to hang up the
current call.
You can select the icons on the audio/information
touch screen instead of the and buttons.
17 ACCORD FHEV-31T3W6200.book 396 ページ ２０１６年４月１１日　月曜日　午後２時４０分

Continued397
uuBluetooth ® HandsFreeLink ®u HFL Menus
Features
The following options are available during a call.
Mute : Mute your voice.
Transfer: Transfer a call from the system to your phone.
Touch Tones : Send numbers during a call. This is useful when you call a menu-
driven phone system.
The available options are shown on the lower
half of the audio/info rmation touch screen.
Select the option. u The mute icon appears when Mute is
selected. Select Mute again to turn it off.
■Options During a Call1Options During a Call
Touch Tones : Available on some phones.
You can select the icons on the audio/information
touch screen.
Audio/information screen
Mute Icon
Mute Icon
Audio/information touch screen
17 ACCORD FHEV-31T3W6200.book 397 ページ ２０１６年４月１１日　月曜日　午後２時４０分

406
Features
Compass*
When you set the power mode to ON, the compass self-calibrates, and the compass
display appears.
Compass Calibration
If the compass indicates the wrong direction, or the CAL indicator blinks, you need
to manually calibrate the system.
1.Set the power mode to ON.
2. On the top screen of any audio source,
press and hold for five seconds.
u The display switches to the Compass
settings screen.
3. Select Calibration .
4. Select Calibration Start .
5. Drive the vehicle slowly in two circles.
u The compass starts to show a direction
after the calibration. The CAL indicator
goes off.
1 Compass*
Compass operation can be affected under the
following conditions:
•Driving near power lines or stations
•Crossing a bridge•Passing a large vehicle, or driving near a large
object that can cause a magnetic disturbance
•When accessories such as antennas and roof racks
are mounted by magnets
1 Compass Calibration
Calibrate the compass in an open area.
While setting the compass, select to cancel the
setting mode and return to the previous screen.
* Not available on all models
17 ACCORD FHEV-31T3W6200.book 406 ページ ２０１６年４月１１日　月曜日　午後２時４０分

407
uuCompass*uCompass Zone Selection
Features
Compass Zone Selection
1. Set the power mode to ON.
2. On the top screen of any audio source,
press and hold for five seconds.
u The display swit ches to the Compass
settings screen.
3. Select Zone Adjust .
u The display shows the current zone
number the system is set to.
4. Select the zone number of your area (See
Zone Map).1Compass Zone Selection
The zone selection is done to compensate the
variation between magneti c north and true north.
If the calibration starts while the audio system is in
use, the display returns to normal after the calibration
is completed.
2
3
4 5678910
111213
14
15Zone Map
Guam Island: Zone 8
Puerto Rico: Zone 11
17 ACCORD FHEV-31T3W6200.book 407 ページ ２０１６年４月１１日　月曜日　午後２時４０分

uuWhen Driving uTurning on the Power
418
Driving
You can remotely turn the power syst em on using the smart entry remote.
■To turn the power system on
The power system is on for up to 10 minutes without you starting the vehicle.
To extend the time for another 10 minute s during the first 10 minutes, press the
button, then press and hold the button.
u The turn signal lights come back on three times, twice, if a 10-minute
extension request was tra nsmitted successfully.
■Remote Engine Start1Remote Engine Start
If there are buildings an d obstacles between your
vehicle and the remote, th e range will be reduced.
While the vehicle is moving, the range may be
reduced.
This distance may vary by external electrical
interference.
The power system may not be turned on by the remote
engine start if:
•You have disabled a remo te engine start setting
using the multi-information display, audio/
information screen
*, or audio/information touch
screen*.•The power mode is not in VEHICLE OFF (LOCK).•The shift lever is in a position other than ( P.•The hood is open, or any door or the trunk is
unlocked.
•You have already used the remote twice to turn the
power system on.
•Another registered smart entry remote is in the
vehicle.
3WARNING
Engine exhaust contains toxic carbon
monoxide.
Breathing carbon monoxide can kill you or
cause unconsciousness.
Never use the remote engine starter when
the vehicle is parked in a garage or other
area with limited ventilation.
Press the button, then pr ess and hold the button.
* Not available on all models
17 ACCORD FHEV-31T3W6200.book 418 ページ ２０１６年４月１１日　月曜日　午後２時４０分