2017 HONDA ACCORD HYBRID brake light

9
Quick Reference Guide
❙How to Refuel (P 483)
❙High-Mount Brake Light (P 513)
❙Emergency Trunk Release Lever (P 133)
❙Opening/Closing the Trunk (P 130)
❙Multi-View Rear Camera (P 480)
❙Trunk Release Button (P 131)
❙Back-Up Lights (P 512)
❙Taillights (P 512)
❙Brake/Taillights (P 511)
❙Rear Turn Signal/Side Marker Lights (P 511)
17 ACCORD FHEV-31T3W6200.book 9 ページ ２０１６年４月１１日　月曜日　午後２時４０分

19
Quick Reference Guide
Instrument Panel (P 73)
CanadaU.S.
Low Fuel Indicator
Anti-lock Brake
System ( ABS)
Indicator
Parking Brake
and Brake System
Indicator (Red)
Canada U.S.
READY Indicator
System Indicators
Malfunction
Indicator Lamp
Low Oil Pressure
Indicator
12-Volt Battery
Charging System
Indicator
Vehicle Stability
Assist (VSA ®) System
Indicator
VSA ® OFF Indicator
Low Tire Pressure/
TPMS Indicator
Electric Power
Steering (EPS) System
Indicator
Lights Indicators
Lights On Indicator
High Beam Indicator
Immobilizer System
Indicator
Seat Belt Reminder
Indicator
EV Indicator
POWER
/CHARGE
Gauge Speedometer
Fuel Gauge
Security System
Alarm Indicator
Shift Lever Position
Indicator
Gauges (P 98)/Multi-Information Display (P 100)/System Indicators (P 74)Turn Signal and
Hazard Warning
Indicators
System Indicators
High Voltage Battery
Charge Level Gauge
POWER SYSTEM
Indicator
Smart Entry System
Indicator
System Message
Indicator
ECON mode
Indicator
Road Departure Mitigation
(RDM) Indicator
Collision Mitigation
Braking System
TM
(CMBSTM) Indicator
Brake System
Indicator (Amber)
Supplemental
Restraint System
Indicator
EV Mode Indicator
System Indicators
Multi-Information Display
Adaptive Cruise Control ( ACC)
Indicator (Green/Amber)Lane Keeping Assist System ( LKAS)
Indicator (Green/Amber)
SPORT Mode
Indicator
Fog Light Indicator
Auto High-Beam
Indicator (Green)*
* Not available on all models
17 ACCORD FHEV-31T3W6200.book 19 ページ ２０１６年４月１１日　月曜日　午後２時４０分

29
Quick Reference Guide
Maintenance (P 485)
Under the Hood (P 493)
● Check engine oil, engine coolant, inverter coolant, and
windshield washer fluid. Add when necessary.
● Check brake fluid.
● Check the 12-volt battery condition monthly.
aPull the hood release handle under the corner of the
dashboard.
bLocate the hood latch lever, pull the lever up, and lift up
the hood.
cWhen finished, close the hood and make sure it is firmly
locked in place.
Lights (P 506)
● Inspect all lights regularly.
Wiper Blades (P 514)
● Replace blades if they leave streaks
across the windshield.
Tires (P 516)
● Inspect tires and wheels regularly.
● Check tire pressures regularly.
● Install snow tires for winter
driving.
17 ACCORD FHEV-31T3W6200.book 29 ページ ２０１６年４月１１日　月曜日　午後２時４０分

31
Quick Reference Guide
What to Do If
The power mode does not
change from VEHICLE OFF
(LOCK) to ACCESSORY.
Why?
●The steering wheel may be locked.
●Move the steering wheel left and right while
pressing the POWER button at the same time.
The power mode does not
change from ACCESSORY
to VEHICLE OFF (LOCK).
Why?The shift lever should be moved to (P.
Why does the brake pedal
pulsate slightly when
applying the brakes?This can occur when the ABS activates, and does not indicate a
problem. Apply firm, steady pressure on the brake pedal. Never
pump the brake pedal.
The rear door cannot be
opened from inside the
vehicle. Why?Check if the childproof lock is in
the lock position. If so, open the
rear door with the outside door
handle.
To cancel this function, push the
lever to the unlock position.
Canadian models
17 ACCORD FHEV-31T3W6200.book 31 ページ ２０１６年４月１１日　月曜日　午後２時４０分

32
Quick Reference Guide
Why do the doors lock
after I unlocked the doors
using a remote
transmitter?If you do not open the doors within 30 seconds, the doors are
relocked automatically for security.
Why does the beeper
sound when I open the
driver's door?The beeper sounds when:
●The power mode is in ACCESSORY.
●The exterior lights are left on.
Why does the beeper
sound when I start driving?The beeper sounds when:
●Driver and/or front passenger are not wearing their seat belts.
●The parking brake lever is not fully released.
Why do I hear a screeching
sound when I apply the
brake pedal?The brake pads may need to be replaced. Have your vehicle
inspected by a dealer.
17 ACCORD FHEV-31T3W6200.book 32 ページ ２０１６年４月１１日　月曜日　午後２時４０分

106
uuGauges and Multi-Information Display uMulti-Information Display
Instrument Panel
■Drive Cycle Score/Lifetime Points
Appear for a few seconds when you set the power mode to VEHICLE OFF (LOCK).
Each has three stages. Depending on your dr iving style, the leaf icon(s) and the
gauge increase or decrease to indicate that you have reached a different stage of
fuel economy.
■Resetting the Drive Cycle Score
1. Make sure the shift lever is in
(P. Turn the power mode to ON.
2. If ECON mode is on, press the ECON button to turn it off.
3. Turn the power mode to VEHICLE OFF (LOCK).
4. Turn the power mode to ON again.
u Make sure to complete steps from 4 through 6 within 30 seconds.
5. Depress the brake pedal twice.
u The color of the ambient meter wi ll change from blue to green.
u When the Fuel Efficiency Backlight setting on the multi-information display
is off, the color stays blue.
6. Press the ECON button twice.
u The color of the ambient mete r will turn to monochrome.
7. Turn the power mode to VEHICLE OFF (LOCK).
Drive Cycle
Score
Lifetime
PointsAdvancing to
2nd Stage
Receding to
2nd Stage Advancing to
3rd Stage
Receding to
3rd Stage
17 ACCORD FHEV-31T3W6200.book 106 ページ ２０１６年４月１１日　月曜日　午後２時４０分

150
uuOperating the Switches Around the Steering Wheel uDaytime Running Lights
Controls
Daytime Running Lights
The parking/daytime running lights come on when the following conditions have
been met:
• The power mode is ON.
• The headlight switch is off, or in .
• The parking brake is released.
The lights remain on even if you set the parking brake. Setting the power mode to
VEHICLE OFF will turn off the daytime running lights.
17 ACCORD FHEV-31T3W6200.book 150 ページ ２０１６年４月１１日　月曜日　午後２時４０分

uuOperating the Switches Around the Steering Wheel uDriving Position Memory System*
156
Controls
1. Set the power mode to ON. Adjust the
driver’s seat to the desired position.
2. Press the SET button.
u You will hear a beep, and the memory
button indicator light will blink.
3. Press and hold memory button
(1 or (2
within five seconds of pressing the SET
button.
u Once the seat position has been
memorized, the indicator light on the
button you pressed stays on.
1. Move the shift lever to
(P.
2. Apply the parking brake.
3. Press a memory button (
(1 or (2).
u You will hear a beep, and the indicator
light will blink.
The seat will automatically move to the
memorized position. When it has finished
moving, you will hear a beep, and the
indicator light stays on.
■Storing a Position in Memory1 Storing a Position in Memory
After you press the SET button, the storing operation
will be canceled when:
•You do not press the memory button within five
seconds.
•You readjust the seat position before the double-
beep.
•You set the power mode to any position except
ON.
Memory
Button 1
Memory
Button 2
SET Button
■Recalling the Stored Position1 Recalling the Stored Position
The seat will st op moving if you:
•Press the SET button or memory button (1 or (2.
•Adjust the seat position.
•Shift into a position other than (P.Memory
Button 1
Memory
Button 2
17 ACCORD FHEV-31T3W6200.book 156 ページ ２０１６年４月１１日　月曜日　午後２時４０分