Page 102 of 609

101
uuGauges and Displays uInformation Display*
Instrument Panel
Shows the outside temperature in Fahr enheit (U.S.) or Celsius (Canada).
■Adjusting the outside temperature indicator
Adjust the temperature reading up to ± 5°F or ± 3°C if the temperature reading 
seems incorrect.
1. Turn the ignition switch to ON 
(w*1.
2. Press and hold the   (Select/Reset) knob for 10 seconds or more while the 
outside temperature is show n on the information display.
u The information display goes into temp erature adjustment mode. The display 
starts showing from -5°F to +5°F (U .S.) or -3°C to +3°C (Canada).
3. Release the   knob when the righ t adjustment amount is shown.
u The adjustment is complete.
Shows the estimated distance you can travel on the remaining fuel. This distance is 
estimated from the fuel economy of your previous trips.
*1: Models with the smart entry system have an  ENGINE START/STOP button instead of an 
ignition switch.
■Outside Temperature
■Range
1 Outside Temperature
The temperature sensor is in the front bumper.
Road heat and exhaust from another vehicle can 
affect the temperature reading when your vehicle 
speed is less than 19 mph (30 km/h).
It may take several minutes for the display to be 
updated after the temperature reading has stabilized.
16 US ACCORD 2D (KA KC KL)-31T3L6300.book  101 ページ  2015年9月25日 金曜日 午前11時39分 
         
        
        
     
        
        Page 103 of 609
102
uuGauges and Displays uMulti-Information Display*
Instrument Panel
Multi-Information Display*
The multi-information display shows the  odometer, trip meter, outside temperature 
indicator, and other gauges.
It also displays important messages such as warnings and other helpful information.
■Main displays
Press the   (information) button to change the display.
■Switching the Display
Average Fuel Economy/
Instant Fuel EconomyRange Elapsed Time Average Speed
Blank Screen Vehicle Settings Engine Oil Life
 Button
* Not available on all models
16 US ACCORD 2D (KA KC KL)-31T3L6300.book  102 ページ  2015年9月25日 金曜日 午前11時39分 
         
        
        
     
        
        Page 104 of 609
103
uuGauges and Displays uMulti-Information Display*
Continued
Instrument Panel
■Lower displays
Press the  SEL/RESET  button to change the display.
Odometer Trip A Trip B
SEL/RESET 
Button
16 US ACCORD 2D (KA KC KL)-31T3L6300.book  103 ページ  2015年9月25日 金曜日 午前11時39分 
         
        
        
     
        
        Page 105 of 609

uuGauges and Displays uMulti-Information Display*
104
Instrument Panel
Shows the total number of miles (U.S.) or ki lometers (Canada) that your vehicle has 
accumulated.
Shows the total number of miles (U.S.) or  kilometers (Canada) driven since the last 
reset. Meters A and B can be used to measure two separate trips.
■Resetting a trip meter
To reset a trip meter, display it, then press and hold the  SEL/RESET button. The trip 
meter is reset to  0.0.
Shows the estimated average fuel economy  of each trip meter in mpg (U.S.) or l/100 
km (Canada). The display is updated at set intervals. When a trip meter is reset, the 
average fuel economy is also reset.
Shows the estimated distance you can travel  on the remaining fuel. This distance is 
estimated from the fuel economy of your previous trips.
Shows the time elapsed since Trip A or Trip B was reset.
■Odometer
■Trip Meter
■Average Fuel Economy
■Range
■Elapsed Time
1 Trip Meter
Switch between trip meter A and trip meter B by 
pressing the  SEL/RESET button.
1Average Fuel Economy
You can change when to reset the average fuel 
economy.
2 Customized Features  P. 106, 298, 316
1Elapsed Time
You can change when to reset the elapsed time.
2 Customized Features  P. 106, 298, 316
16 US ACCORD 2D (KA KC KL)-31T3L6300.book  104 ページ  2015年9月25日 金曜日 午前11時39分 
         
        
        
     
        
        Page 106 of 609

Continued105
uuGauges and Displays uMulti-Information Display*
Instrument Panel
Shows the average speed in mph (U.S.) or km/h (Canada) since Trip A or Trip B was 
reset.
Shows the instant fuel economy as a bar gr aph in mpg (U.S.) or l/100 km (Canada).
Shows the remaining oil life and Maintenance Minder
TM.
2 Maintenance MinderTM P. 505
Shows the outside temperature in Fahr enheit (U.S.) or Celsius (Canada).
■Adjusting the outside temperature display
Adjust the temperature reading up to ±5°F or ±3°C if the temperature reading 
seems incorrect.
■Average Speed
■Instant Fuel Economy
■Engine Oil Life
■Outside Temperature
1 Average Speed
You can change when to reset the average speed.
2 Customized Features  P. 106, 298, 316
1Outside Temperature
The temperature sensor is in the front bumper.
Road heat and exhaust fr om another vehicle can 
affect the temperature reading when your vehicle 
speed is less than 19 mph (30 km/h).
It may take several minutes for the display to be 
updated after the te mperature reading has stabilized.
Use the multi-information display's customized 
features to correct the temperature. 2 Customized Features  P. 106, 298, 316
16 US ACCORD 2D (KA KC KL)-31T3L6300.book  105 ページ  2015年9月25日 金曜日 午前11時39分 
         
        
        
     
        
        Page 107 of 609

uuGauges and Displays uMulti-Information Display*
106
Instrument Panel
Use the multi-information display  to customize certain features.
■How to customize
Select the  Vehicle Settings screen by pressing the   button while the 
ignition switch is in ON 
(w*1, and the vehicle is at a complete stop.
Press the  SEL/RESET  button.
*1:Models with the smart entry system have an  ENGINE START/STOP button instead of an 
ignition switch.
■Customized Features1 Customized Features
To customize other features, press the   
button.
2 List of customizable options  P. 109
2 Example of customization settings  P. 113
Customization is possible when you see the driver’s 
ID ( Driver 1  or Driver 2) on the screen.
The driver’s ID indicates  which remote transmitter 
you have used to unlock the driver’s door. The 
customized settings are recalled every time you 
unlock the driver’s door with that remote.
When you customize settings: Shift to 
( P
 Button: 
Changes the customize 
menus and items.
Multi-Information Display: 
Goes to  Vehicle Settings .
SEL/RESET button: 
Enters the selected item.
16 US ACCORD 2D (KA KC KL)-31T3L6300.book  106 ページ  2015年9月25日 金曜日 午前11時39分 
         
        
        
     
        
        Page 108 of 609
107
uuGauges and Displays uMulti-Information Display*
Continued
Instrument Panel
■Customization flow
Press the   button.
SEL/RESETVehicle Settings
“Trip A” Reset Timing
Language Selection
Adjust Outside Temp. Display
Memory Position Link
Door Unlock Mode
Keyless Access Light Flash
4
4
4
4
TPMS Calibration
Driver Assist System Setup
Meter Setup
Position Setup
Keyless Access Setup
SEL/RESET
SEL/RESET
SEL/RESET
SEL/RESET
“Trip B” Reset Timing
Fuel Efficiency Backlight
4
ACC Pre-Running Car Detect Beep
ACC Display  Speed Unit
4Keyless Start Guidance Screens
SEL/RESET
Keyless Access Beep
Forward Collision Warning Distance
4
4
4
Lane Keep Assist Suspend Beep
Road Departure Mi tigation Setting
Remote Start System ON/OFF*
* Not available on all models
16 US ACCORD 2D (KA KC KL)-31T3L6300.book  107 ページ  2015年9月25日 金曜日 午前11時39分 
         
        
        
     
        
        Page 109 of 609
108
uuGauges and Displays uMulti-Information Display*
Instrument Panel
Exit
4
4
4
Door Setup
Maintenance Reset
Default All
SEL/RESET
4
SEL/RESET
4
Lighting SetupSEL/RESET
4
Key And Remote Unlock Mode
Auto Door Lock
Auto Door Unlock
Keyless Lock Answer Back
Security Relock Timer
Interior Light Dimming Time
Headlight Auto Off Timer
Auto Light Sensitivity
4
4
16 US ACCORD 2D (KA KC KL)-31T3L6300.book  108 ページ  2015年9月25日 金曜日 午前11時39分