2017 FORD POLICE INTERCEPTOR SEDAN oil change

[x] Cancel search: oil change

Page 6 of 358

FORD POLICE INTERCEPTOR SEDAN 2017 1.G Owners Manual Stability Control
Principle of Operation..................................118
Using Stability Control................................119
Parking Aids
Principle of Operation............................

Page 76 of 358

FORD POLICE INTERCEPTOR SEDAN 2017 1.G Owners Manual Information
Information
Coolant Temp. — The engine coolant indicator changes colors indicating: blue for cool,
gray for normal and red for hot. If the engine coolant temperature exceeds the normal
r

Page 80 of 358

FORD POLICE INTERCEPTOR SEDAN 2017 1.G Owners Manual Fuel
Action
Message
An early reminder of a low fuel condition.
Fuel Level Low
The fuel fill inlet may not be properly closed.
Check Fuel Fill Inlet
Maintenance Action
Message
Stop your vehicle as soon

Page 100 of 358

FORD POLICE INTERCEPTOR SEDAN 2017 1.G Owners Manual Switching Between E85 and
Gasoline
We do not recommend repeatedly
alternating between E85 and gasoline. If
you switch from using E85 to gasoline, or
from gasoline to E85, add as much fuel as
possible,

Page 146 of 358

FORD POLICE INTERCEPTOR SEDAN 2017 1.G Owners Manual BREAKING-IN
You need to break in new tires for
approximately 300 mi (480 km). During
this time, your vehicle may exhibit some
unusual driving characteristics.
Avoid driving too fast during the first
1

Page 176 of 358

FORD POLICE INTERCEPTOR SEDAN 2017 1.G Owners Manual Engine Shield Some vehicles may be equipped with an
aero-shield under the engine. This shield
needs to be removed for service, including
oil and filter changes. The shield has four
quick-release faste

Page 179 of 358

FORD POLICE INTERCEPTOR SEDAN 2017 1.G Owners Manual Note:
Make sure you install the oil filler cap
correctly.
Note: Soak up any spillage with an
absorbent cloth immediately.
OIL CHANGE INDICATOR
RESET
Use the information display controls on
the steerin

Page 201 of 358

FORD POLICE INTERCEPTOR SEDAN 2017 1.G Owners Manual Note:
Industrial-strength or heavy-duty
cleaners in combination with brush agitation
to remove brake dust and dirt, could wear
away the clear coat finish over a period time.
Note: Do not use hydrofluo
Page:   1-8 9-16 17-24 next >