2017 FORD FUSION (AMERICAS) audio

[x] Cancel search: audio

Page 359 of 528

FORD FUSION (AMERICAS) 2017 2.G Owners Manual Potential station issues
Action
Cause
Issues
No action required. This is a
broadcast issue.
This is poor time alignment
by the radio broadcaster.
Echo, stutter, skip or repeat
in audio.
Increase or de

Page 360 of 528

FORD FUSION (AMERICAS) 2017 2.G Owners Manual Note:
This receiver includes the eCos
real-time operating system. eCos is
published under the eCos License.
Satellite Radio Reception Factors Potential satellite radio reception issues
For optimal rec

Page 361 of 528

FORD FUSION (AMERICAS) 2017 2.G Owners Manual Troubleshooting
Action
Condition
Message
No action required. This
message should disappear
shortly.
Radio requires more than
two seconds to produce
audio for the selected
channel.
Acquiring\b
If this

Page 362 of 528

FORD FUSION (AMERICAS) 2017 2.G Owners Manual USB PORT (If Equipped)
WARNING
Driving while distracted can result in
loss of vehicle control, crash and
injury. We strongly recommend that
you use extreme caution when using any
device that may take

Page 367 of 528

FORD FUSION (AMERICAS) 2017 2.G Owners Manual To adjust this setting press the voice button, when prompted say:
Action and Description
Voice Command
voice settings
Then any of the following: When enabled, this feature will prompt you
to confirm a

Page 368 of 528

FORD FUSION (AMERICAS) 2017 2.G Owners Manual 1. Make sure to switch on your phones
Bluetooth feature before starting the
search. See your devices manual if
necessary.
2. Press the PHONE button. When the
audio display indicates there is no
pair

Page 369 of 528

FORD FUSION (AMERICAS) 2017 2.G Owners Manual 5. Select the option to add. This starts
the pairing process.
6. When a message to begin pairing appears in the audio display, search for
SYNC on your device.
7. When prompted on your cell phone ’s

Page 370 of 528

FORD FUSION (AMERICAS) 2017 2.G Owners Manual Voice Commands
Plus
Pound (#) Star (*)
Note: To exit dial mode, press and hold the
phone button or press any button on the
audio system.
To access text messages say: Voice Command
[text] (messages | m